Products

VINNAPAS® CA 55 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a medium-firm hand is required. The dispersion combines high solid content with a low viscosity—a combination that permits the addition of high filler loadings, resulting in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 55 is not produced with any added organic solvents, plasticizers, or formaldehyde donors.

VINNAPAS® 5046 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives, repair mortars, troweling compounds, and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5046 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to strong non-slump properties, it offers excellent workability.

VINNAPAS® 5012 T is a thixotropic dispersible polymer powder for dry mix technology, specifically suited for tile adhesives, renders and plasters, wall and joint fillers, as well as skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® T, which means it has a thixotropic effect on rheology and provides the basic properties of adhesion and flexibility in addition. VINNAPAS® 5012 T is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® EAF 7868 is a low glass transition temperature (Tg) aqueous polymer dispersion formulated with vinyl acetate, ethylene, and acrylic esters. It is manufactured without the use of plasticizers and demonstrates excellent compatibility with fillers. Moreover, it provides good adhesion to diverse substrates, including concrete, metal, wood, and plastics. Derived from low-volatile C1/C2 value streams, it can be formulated without the need for plasticizers.

VINNAPAS® EF 7877 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and exhibits excellent filler compatibility. This product has high filler acceptance and provides good adhesion to various substrates, including concrete, metal, wood, and plastics.

VINNAPAS® 5047 T is a very flexible dispersible polymer powder with a slight thixotropic effect and very good workability, specifically suited for tile adhesives, troweling compounds, and ETICS. It is based on a copolymer of vinyl acetate and ethylene. VINNAPAS® 5047 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic properties. In addition to its non-slump properties, it offers excellent workability.

VINNAPAS® 538 ED is a surfactant-stabilized polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, formaldehyde donors, or alkyl phenol ethoxylate (APEO)-containing compounds. VINNAPAS® 538 ED is a medium-viscosity product that exhibits high compatibility with cement, and its influence on cement setting is marginal.

VINNAPAS® EP 7860 is an aqueous polymer dispersion based on vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers. This dispersion exhibits excellent compatibility with fillers, allowing for high filler acceptance. Moreover, VINNAPAS® EP 7860 demonstrates special extension recovery properties, particularly at high filler levels. It also offers good adhesion to a variety of substrates, including concrete, metal, wood, and plastics.

VINNAPAS® eco EAF 67 is an aqueous polymer dispersion, free of plasticizers, produced from vinyl acetate, ethylene, and acrylate monomers. This dispersion serves as a pressure-sensitive adhesive, exhibiting excellent cohesion and adhesion properties that remain effective even at elevated temperatures. The production of VINNAPAS® eco EAF 67 utilizes APEO-free surface active agents.

VINNAPAS® EF 7865 is a low Tg aqueous polymer dispersion formulated with vinyl acetate and ethylene monomers. It is manufactured without the use of plasticizers and demonstrates excellent filler compatibility. This product exhibits high filler acceptance and provides good adhesion to various substrates such as concrete, metal, wood, and plastics.

VINNAPAS® 5537 T is a dispersible polymer powder for dry mix mortars, specifically suited for thixotropic tile adhesives and ETICS. It is based on a flexible copolymer of vinyl acetate and ethylene. VINNAPAS® 5537 T belongs to the product class VINNAPAS® T, which means that it provides thixotropic characteristics. Besides good non-slump properties and workability, it offers good tensile adhesion strength after water immersion. The product is currently in the process of being introduced into industrial use (scale-up product). The quoted product data is, therefore, subject to change. Before industrial use, availability should be clarified with WACKER POLYMERS.

VINNAPAS® EAF 68 is a plasticizer-free, aqueous polymer dispersion produced from the monomers vinyl acetate, ethylene, and acrylate. VINNAPAS® EAF 68 is especially suitable as a raw material to manufacture floor covering adhesives, especially for carpets and PVC floor coverings. VINNAPAS® EAF 68 can also be used for the production of pressure-sensitive adhesives, such as self-adhesive tapes, films, labels, sound insulation mats, and heat insulation mats. VINNAPAS® EAF 68 may additionally be used as an adhesion promoter in adhesive formulations.

VINNAPAS® 8620 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives. It is based on a flexible copolymer of vinylacetate, ethylene, and vinylchloride and belongs to the product class VINNAPAS® E which means that it provides enhanced properties, like extended open time and excellent adhesion after water immersion. VINNAPAS® 8620 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5518 H is a strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts and renders. It is based on a hard copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in combination with increased mechanical strength.

VINNAPAS® 4121 N is a dispersible polymer powder for dry mix mortars, specifically suited for price-optimized ETICS. It is based on a semi-flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides very good adhesion on organic (polystyrene) and inorganic (concrete) substrates. Additionally, VINNAPAS® 4121 N can be used for C1- and simple C2-tile adhesives.

VINNAPAS® 4020 N is a dispersible copolymer powder composed of vinyl acetate and ethylene that can be easily dissolved in water. It offers a semi-flexible polymer with no impact on rheology and possesses outstanding general-purpose properties. When VINNAPAS® 4020 N is incorporated into compounds, it enhances adhesion, flexural strength, deformability, and abrasion resistance while maintaining excellent handling characteristics. Moreover, it does not significantly affect leveling, thixotropy, or water retention. This makes VINNAPAS® 4020 N an ideal choice for blending with mortar additives that aim to impart specific properties.

VINNAPAS® CA 5850 is an aqueous polymer dispersion based on vinyl acetate and ethylene. It is particularly suited for carpet binder applications where a firmer hand is required. The dispersion combines moderately high solid content with a lower viscosity—a combination that permits the addition of moderate filler loadings. This results in adhesive formulations with high solid contents that are typically required in the carpet industry. VINNAPAS® CA 5850 is not produced with any added organic solvents or plasticizers.

VINNAPAS® 548 ND is a high-viscosity polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. The dispersion is characterized by high viscosity and good bonding strength due to high Mw PVOH.

VINNAPAS® 5028 E (GER) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall troweling compounds. It is based on a flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E, which means that it provides enhanced properties, such as extended open time, flexibility, and increased adhesion after water immersion. VINNAPAS® 5028 E (GER) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS® 545 ND is a polymer dispersion based on vinyl acetate and ethylene. It is produced without the use of organic solvents, plasticizers, or formaldehyde donors. The residual monomer content of the dispersion is below 1000 ppm. It exhibits high compatibility with cement, and its influence on cement setting is marginal. VINNAPAS® 545 ND has a medium viscosity, is compatible with other dispersions (such as styrene/acrylic and pure acrylic dispersions), and is recommended for tile adhesives as well as cement admixtures.

VINNAPAS® 5010 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and skim coat. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 5844 E is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for ETICS, waterproofing membranes, and concrete repair mortar. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5844 E is part of our standard range, offering the best-in-class solution for a wide variety of applications.

NEXIVA® GP 121 is a flexible dispersible polymer powder formulated with vinyl acetate and ethylene. It serves as a versatile binder suitable for a wide range of applications in various industries. This product includes a fine mineral filler that acts as an antiblocking agent, ensuring smooth and easy handling. Additionally, it offers improved workability even under harsh climatic conditions.

VINNAPAS® 5010 N (KOR) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, plasters, and skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (KOR) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

NEXIVA® GP 225 is a dispersible polymer powder that primarily consists of vinyl acetate and ethylene. It is specifically formulated as a versatile binder suitable for a wide range of applications across various industries, including coatings and adhesives. However, its potential uses are not limited to these industries alone.

GENIOSIL® XT 55 is a silane-terminated polymer suitable for use in moisture-curing formulations. It readily dissolves in standard organic solvents while being virtually insoluble in aqueous media. When used, it reacts slowly, releasing methanol and forming a resinous deposit. GENIOSIL® XT 55 finds applications in various fields such as assembly adhesives (including hybrids), building and construction adhesives, and industrial adhesives.

VINNAPAS® 5544 N is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for diatom ooze and skim coat. It is based on a very flexible copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5544 N is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 550 ED is a multi-purpose construction dispersion, specifically suited for cement admixtures, the formulation of two-component cementitious waterproofing membranes, as well as the production of primers. The dispersion is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® ED, which means that it enhances the adhesion and flexibility of mortars.

VINNAPAS® 4042 H is a medium hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a hydrophobic effect in addition to the basic properties of adhesion and flexibility.

VINNAPAS® EP 701K (NJG) is a polymer dispersion based on vinyl acetate and ethylene. It offers excellent elongation, water resistance, and flexibility. This dispersion also demonstrates outstanding adhesion to various plastic surfaces, resulting in permanently flexible adhesive joints. Additionally, it provides high cohesion, ensuring strong and durable bonds.

VINNAPAS® 5010 N (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives, renders, plasters, and skim coats. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® N, which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5010 N (USA) is part of our standard range, offering the best-in-class solution for a wide variety of applications.

VINNAPAS® 8034 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for tile grouts, renders, plasters, and skim coats. It is based on a flexible terpolymer of vinyl chloride, ethylene, and vinyl laurate. VINNAPAS® 8034 H belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to adhesion properties.

VINNAPAS® 5025 L is a dispersible polymer powder for dry mix mortars, specifically suited for self-leveling flooring compounds and screeds. It is based on a hard copolymer of vinylacetate and ethylene and belongs to the product class VINNAPAS® L, which means that it improves the leveling and surface properties as well as the stabilization of the fresh mortar. Cured mortars with VINNAPAS® 5025 L have improved adhesion, flexural strength, deformability, and abrasion resistance.

VINNAPAS® 5048 H is a very strong hydrophobic dispersible polymer powder for dry mix mortars, specifically suited for ETICS, renders and plasters, and waterproofing membranes. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® H, which means that it provides a remarkable hydrophobic effect in addition to the basic properties of adhesion and flexibility.

VINNAPAS® 5028 E (USA) is a multi-purpose dispersible polymer powder for dry mix mortars, specifically suited for tile adhesives and wall troweling compounds. It is based on a flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® E, which means that it provides enhanced properties, such as extended open time, flexibility, and increased adhesion after water immersion. VINNAPAS® 5028 E (USA) is part of our standard range, offering you the best-in-class solution for a wide variety of applications.

VINNAPAS® 5044 N (GER) is a dispersible polymer powder for dry mix mortars, specifically suited for ETICS, water-proofing membranes, and concrete repair. It is based on a very flexible copolymer of vinyl acetate and ethylene and belongs to the product class VINNAPAS® N which means that it has a neutral effect on rheology and provides the basic properties of adhesion and flexibility, giving a high degree of formulation freedom. VINNAPAS® 5044 N (GER) is part of our standard range, offering the best-in-class solution for a wide variety of applications.