Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- CASE Ingredients Functions
- Industrial Additives Functions
Features & Benefits
- Labeling Claims
- CASE Ingredients Features
- Industrial Additives Features
Applications & Uses
- Markets
- Applications
- Application Method
- Compatible Substrates & Surfaces
- Industrial Additives End Use
- Application Methods
Very well suited:
- Spraying
- Foaming
Well suited:
- Impregnation
- Print Bonding
- Application Details
General
VINNAPAS® EN 1024 is particularly suitable for foam application. However, it may also be applied via other methods. (e.g. size press, impregnation or spraying)
Polymer Dispersions
VINNAPAS® EN 1024 can be mixed with most of the VINNAPAS® and VINNOL® dispersions and with many other anionic and/ or non-ionic aqueous polymer dispersions. However, the compatibility of the mixture should be tested by undertaking a storage test. Temperatures above 150 °C are necessary to achieve proper crosslinking.
Defoaming Agents
Suitable defoaming agents include SILFOAM® SE1662, FOAMASTER® WO 2310, AGITAN® 352 or Surfynol® DF58. The compatibility and efficiency should be tested in any case.
- SILFOAM® is a trademark of Wacker Chemie AG
- FOAMASTER® is a trademark of BASF SE
- AGITAN® is a trademark of MÜNZING Chemie GmbH
- SURFYNOL® is a trademark of Evonik Resource Efficiency GmbH
Thickening Agents
We recommend, in particular, products with neutral pH, e.g. those based on cellulose derivatives, polyvinyl alcohol or polyurethane. Should alkali-swellable polyacrylic acid derivatives be used those need to be chosen that are effective with ammonia, in order not to interfere with the acid catalyzed cross-linking of VINNAPAS® EN 1024 like e.g. Rheovis® AS 1125, ROHAGIT® SD15, Viscalex® HV30. Their compatibility and efficacy has to be checked.
- RHEOVIS® is a trademark of BASF SE
- ROHAGIT® is a trademark of Synthomer PLC
- VISCALEX® is a trademark of BASF SE
Properties
- Physical Form
- Typical Properties
- Specifications
- Properties
- VINNAPAS® EN 1024 is particularly suitable as a binder for soft and hydrophilic nonwovens
- The dispersion provides good wet strength while the formaldehyde level on the nonwovens remains low
- VINNAPAS® EN 1024 is particularly suitable for foam application
Value | Units | Test Method / Conditions | |
Appearance of the Dispersion Film | Clear glossy | — | Visual |
Density (at 23°C) | approx. 1.04 | g/cm³ | DIN EN ISO 2811-3 |
Elongation (at break) | approx. 800 | % | DIN EN ISO 527, part 1 - 3 |
Glass Transition Temperature | approx. -11 | °C | Specific method |
Minimum Film Forming Temperature | approx. 0 | °C | DIN ISO 2115 |
Predominant Particle Size | approx. 0.3 | µm | Specific method |
Protective Colloid (Emulsifier System) | Anionic surfactants | — | — |
Surface of the Dispersion Film | Slightly tacky | — | — |
Tensile Strength (Cross Linked) | approx. 2.0 | N/mm² | DIN EN ISO 527, part 1 - 3 |
Value | Units | Test Method / Conditions | |
Dynamic Viscosity (at 23°C) | 100 - 600 | mPa·s | DIN EN ISO 2555 |
pH | 4 - 5 | — | DIN/ISO 976 |
Solids Content | 52 - 54 | % | DIN EN ISO 3251 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
Storage & Handling
- Storage Information
- When the dispersion is stored in tanks, proper storage conditions must be maintained. VINNAPAS® EN 1024 has a shelf life of 6 months starting from the date of receipt if stored in the original, unopened containers at temperatures between 5 and 30 °C.
- Iron or galvanized-iron equipment and containers are not recommended because the dispersion is slightly acidic. Corrosion may result in discoloration of the dispersion or its blends then further processed. Therefore the use of containers and equipment made of ceramics, rubberized or enameled materials, appropriately finished stainless steel, or plastic (e.g. rigid PVC, polyethylene or polyester resin) is recommended. As polymer dispersions may tend to superficial film formation, skins or lumps may form during storage or transportation. Filtration is therefore recommended prior to utilization of the product.
Preservation for Transport, Storage and further Processing
- VINNAPAS® EN 1024 is adequately preserved during transportation and storage if kept in the original, unopened containers. However, if it is transferred to storage tanks, the dispersion should be protected against microbial attack by adding a suitable preservative package.
- Measures should also be taken to ensure cleanliness of the tanks and pipes. In unstirred tanks, a layer of preservative-containing water should be sprayed onto the surface of the dispersion to prevent the formation of unwanted skin and possible attack by microorganisms. The thickness of this water layer should be < 5 mm for low viscosity dispersions and up to 10–20 mm for high viscosity products. Proper procedures periodic tank cleaning and sanitization must be set up in order to prevent microbial attack. Contact your biocide representative/supplier for further plant hygiene recommendations. Measures should be taken to ensure that only clean air enters the tank when the dispersion is removed.
- Finished products manufactured from polymer dispersions usually also require preservation. The type and scope of preservation will depend on the raw materials used and the anticipated sources of contamination. The compatibility with other components and the efficacy of the preservative should always be tested in the respective formulation.
- Preservative manufacturers will be able to advise you about the type and dosage of preservative required.