Products

ELASTOSIL® LR 3003/80 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

ELASTOSIL® Color Paste PT Brown RAL 8015 is a ready-to-use compound comprising specific color pigments and a reactive silicone polymer, which is commonly used in ELASTOSIL® high-consistency silicone rubber. This ensures a homogeneous covulcanization of the color paste without interference of the physical properties (e.g. hardness) and without migration as observed with silicone oil.

WACKER® APF 130 is a clear, colorless, and odorless polydimethylsiloxane with a high proportion of phenyl groups. This versatile fluid finds widespread application as a heat transfer fluid and a pressure transfer fluid. It also demonstrates excellent performance as a dielectric in capacitors and transformers and serves as a reliable base fluid in heat-resistant lubricants.

BELSIL® DM 350 is a linear, non-reactive, unmodified polydimethylsiloxane. It is known for its low surface tension and high spreading coefficient. Thanks to their flexible polymer backbone, dimethicones such as DM 350 exhibit high permeability to gasses like water vapor and oxygen, allowing the skin to respire.

SILPURAN® 6000/20 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/20 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.

WACKER® Silicate TES 28 is a monomeric ethyl silicate, also known as tetraethoxysilane or tetraethyl orthosilicate. It is a colorless, low-viscosity liquid with an SiO2 content of approximately 28 wt.%. This product is commonly used in the formulation of anti-corrosive coatings, marine and protective coatings, as well as industrial coatings.

WACKER® AK 2000 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 2000 mm²/s. Its chemical structure gives it an exceptional property profile that distinguishes it from organic materials like mineral oils. It possesses good dielectric properties, has low surface tension, resulting in high surface activity, and is chemically highly unreactive.

ELASTOSIL® N189 Black is a non-slump, neutral-cure silicone sealant that cures at room temperature under the influence of atmospheric moisture. It exhibits excellent primerless adhesion to many substrates and has good resistance to mineral oil and coolants. Additionally, it shows excellent heat stability.

ELASTOSIL® LR 3040/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Especially noted for their high tear resistance according to DIN ISO 34-1 A (Trousers) and ASTM D 624 B (crescent),

WACKER® L 057 is a 100% water-dispersible, hydrolytically stable polyether-functional polydimethylsiloxane. WACKER® L 057 can be used in a wide range of applications, such as the textile industry, polishes, cleaners, and the plastics industry. WACKER® L 057 exhibits both special lubricant properties and antistatic action.

ELASTOSIL® LR 3066/60 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.

ELASTOSIL® LR 3271/45 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3271 series. It is a paste-like, easily pigmentable, two-component compound with extremely short curing times. It is a primerless, selfbonding grade that adheres to various plastic substrates (e.g. PET, PBT) and metals but not in the mold.

ELASTOSIL® RT 778 is a non-slump, condensation-curing RTV-2 silicone adhesive. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 778 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can continuously endure changing climatic conditions, UV radiation, and temperatures up to 250°C (482°F) without damage.

ELASTOSIL® Vario 40 is a pourable, two-component silicone rubber that vulcanizes at room temperature through addition-curing. It can be blended with ELASTOSIL® VARIO 15 to achieve a desired hardness ranging between 15 and 40 Shore A. This versatile silicone rubber is used in applications such as prototype molding and reproduction molding.

ELASTOSIL® LR 3671/30 A/B is a self-adhesive liquid silicone rubber from the ELASTOSIL® 3671 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time and good mechanical and electrical properties. The vulcanizates of this product are known for their self-adhesive properties to various substrates as well as their low coefficient of friction.

ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.

VINNAPAS® EN 1028 is a self-crosslinking, aqueous polymer dispersion based on the monomers vinyl acetate and ethylene. It is manufactured without the use of plasticizers. This product is specifically designed to serve as a binder for soft hydrophobic nonwovens, providing them with high wet strength. Moreover, VINNAPAS® EN 1028 is an ideal choice as a binder for nonwovens that need to meet rigorous eco-labeling requirements.

ELASTOSIL® RT 426 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in applications related to electrics and electronics, specifically for electronics encapsulation. This silicone rubber is known for its condensation-curing properties, flowability, and heat resistance. It is a two-component product that provides reliable performance in various electronic applications.

WACKER® AK 5 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 5 mm²/s. Its chemical structure gives WACKER® AK 5 exceptional properties that distinguish it from organic materials like mineral oils. It is chemically highly unreactive, has a low solidifying point, and exhibits high heat resistance.

HDK® H18 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H18 is used as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, particularly in vinylester, epoxy, and polyurethane systems.

WACKER® Silazane HMN is a colorless liquid with a strong odor. It is a universal silylating agent used for the derivatization of alcohols, carboxylic acids, amines, amides, mercaptans, etc. It is applicable in chemical production processes in various markets, particularly industrial.

HDK® H16 is a synthetic, hydrophobic, amorphous silica produced via flame hydrolysis. It is a white colloidal powder of high purity. HDK® H16 is applied as a thickening and thixotropic agent in composites, coatings, adhesives, and sealants, especially in vinylester, epoxy, and polyurethane systems. It also finds applications in adhesives.

SILFOAM® SE 2060 is a versatile antifoam solution with 15% active ingredient and 25% solids. It stands out for its higher emulsifier content, making it easily metered due to its low viscosity. With its excellent resistance to alkalis and acids, it finds utility in various applications where pH plays a crucial role.

ETONIS® 1450 S is a liquid additive designed for soil stabilization. When used in combination with the dispersion ETONIS® 1400 S, the additive ETONIS® 1450 S enhances the performance, especially with soils that have finer particle sizes. To stabilize the soil, ETONIS® 1450 S is added to ETONIS® 1400 S at a dosage of 5 to 10% of the volume of ETONIS® 1400 S, depending on the characteristics of the soil.

ELASTOSIL® A234 White is a flowable RTV-1 silicone rubber that cures at room temperature under the influence of moisture. It shows excellent primerless adhesion to many substrates and offers outstanding heat stability. It is a multipurpose grade for high-temperature applications. Suitable for sealing and bonding, such as the bonding of steam chambers and sole plates of steam irons,

WACKER SilGel® 613 is a pourable, addition-curing, RTV-2 silicone rubber that undergoes vulcanization at room temperature, resulting in a highly flexible silicone gel. This product offers inherent tack and possesses excellent mechanical damping properties. Furthermore, when used in conjunction with ELASTOSIL® CAT UV, WACKER SilGel® 613 exhibits rapid UV curing at room temperature while maintaining a long pot life.

ELASTOSIL® LR 3043/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3043 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.

HDK® N20 P Pharma is a synthetic, hydrophilic, amorphous silica powder produced via flame hydrolysis. It is a white, high-purity colloidal powder. This product serves as a glidant for tableting, effectively improving the flow of powders. Furthermore, HDK® N20 P Pharma undergoes testing according to the EP and USP/NF standards.

WACKER® AK 500 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 500 mm²/s. Its chemical structure imparts exceptional properties that distinguish it from organic materials like mineral oils. WACKER® AK 500 exhibits excellent dielectric properties, low surface tension resulting in high surface activity, and a high degree of chemical inertness. These characteristics make it well-suited for various applications where these specific properties are required.

ELASTOSIL® LR 5040/45 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/45 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.

WACKER® AK 1 000 000 STAB is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 1,000,000 mm²/s. It is formulated with a special heat stabilizer that protects the silicone fluid from thermal decomposition and viscosity changes. As a result, WACKER® AK 1 000 000 STAB is well-suited for applications involving high temperatures and/or shear stress. It has a low solidification point, good dielectric properties, a high flash point, and is chemically inert.

ELASTOSIL® RT 480 is a spreadable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used in industrial assembly and reproduction molding applications. This silicone rubber exhibits condensation-curing properties, allowing for fast curing at room temperature. It has a spreadable and self-leveling flow, making it easy to work with. ELASTOSIL® RT 480 is a two-component product that provides reliable results in various applications.

WACKER® EP 501 is a white, milky water-based emulsion of a phenylmethyl silicone fluid. It can be diluted with water to remove any solid content. This product is suitable for high-temperature treatments on textiles and can also be used as an additive for water-based coating systems.

ELASTOSIL® Color Paste FL Orange RAL 2004 is a ready-to-use masterbatch comprising specific pigments and reactive silicone polymers that are commonly used in ELASTOSIL® liquid silicone rubber. This ensures a homogeneous covulcanization of the color paste without significant impairment of the physical properties (e.g. hardness) and without migration, as may be observed for systems based on silicone oil.

ELASTOSIL® LR 3022/60 A/B is a liquid silicone rubber. It is a paste-like, easily pigmentable, two-component compound with short curing times and excellent coolant resistance. The vulcanizates of this product are opaque with average mechanical properties. However, they are highly recognized for their ultra-low compression sets after post-curing.