Products in Automotive: Coextrusion

VESTAMID® MLT 7840 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It features high thermal stability, resistance to oil and fuels, and excellent barrier properties. It is resistant to fuel and finds applications in the automotive and mobility sectors.

VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.

VESTAMID® MLT 4540 is an established 5-layer tube used in automotive fuel handling systems. It consists of an outer and inner layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). The VESTAMID® MLT 4540 offers good permeation resistance against alcohol-containing fuels and excellent cold impact performance.

VESTAMID® MLT 8EV is a proven 3-layer system designed for thermal management systems in the automotive industry. It is particularly suited for battery electric vehicles (BEVs), where thermal management of the battery, E-motor, or power electronics is crucial. The VESTAMID® MLT 8EV offers a cost-effective composition for cooling line applications, meeting the specific requirements of BEVs.

VESTAMID® MLT 4800 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It consists of an outer layer of VESTAMID® polyamide 12, a barrier layer of ethylene vinyl alcohol (EVOH), and an inner layer of VESTAMID® polyamide 612. VESTAMID® MLT 4800 offers excellent barrier properties against ethanol-containing fuels and has very low extractables. It exhibits excellent cold impact properties, like all Evonik multilayer systems.

VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.

VESTAMID® MLT 4300 is an established 4-layer tube for automotive fuel handling systems. It is a multilayer tubing system with an outer layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). VESTAMID® MLT 4300 offers excellent permeation resistance against ethanol-containing fuels and good cold impact performance.

VESTAMID® MLT 7400 is a proven 5-layer tube designed specifically for fuel handling systems in the automotive industry. This innovative system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. The combination of these materials provides exceptional resistance to alcohol-containing fuels, superior chemical resistance on the inner tube surface, and virtually zero extraction levels. VESTAMID® MLT 7400 delivers reliable performance and durability. It comes in the form of pellets or granules, allowing for easy integration into manufacturing processes. With its excellent thermal stability and resistance to oil and fuels, this tube finds extensive applications in the automotive and mobility sectors.

VESTAMID® MLT 8000 is a proven 3-layer system for thermal management systems in the automotive industry. It consists of an outer layer of VESTAMID® polyamide 12 and a special polypropylene inner layer. The product offers high hydrolysis resistance against coolant liquids and urea solutions, good cold impact performance, and significant weight savings compared to less innovative concepts such as metal or rubber hoses.

MOCOM Compounds ALFATER® XL D50E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color, high viscosity, and excellent weathering, chemical, ozone, and hot air resistance. It is suitable for pre-drying in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours. It is recommended for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, and is suitable for extruded parts, blow molded parts, and coextrusion. Typical applications include profiles, seals, sealing lips, conduit, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A90E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) that provides good weathering, chemical, ozone, and hot air resistance. It is suitable for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components, and can be used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries. It has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL ECO A75I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) polymer recyclate with excellent resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for a wide variety of applications, including injection molded parts, extruded parts, coextrusion, seals, sealing lips, handles, racking/shelving, impact protection/shock absorbers, protection caps, soft touch elements, cable ducts, casters, profiles, and 2K components. It also has excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. The service temperature range of this polymer is -40 to 125°C.

MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.

MOCOM Compounds ALFATER® XL A65E 2GP0000 WT1159-17 is a thermoplastic vulcanisate (PP+EPDM) available in natural, white, and black colors. It has high viscosity and superior resistance to weathering, chemicals, ozone, hot air, and hydrolysis. This material is widely used in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for applications such as profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, and air ducts, as well as 2K components. It offers excellent adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL D40E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black or natural color. It has high viscosity and good resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL ECO A75I 2GP0001 is a black Thermoplastic Vulcanisate (PP+EPDM) polymer recyclate with bio-EPDM, which has good weathering resistance, resistance to alkalis, ozone resistance, hot air resistance, and hydrolysis resistance. It is used for injection molded parts, extruded parts, and coextrusion and is suitable for applications such as seals, sealing lip, handles, racking/shelving, impact protection/shock absorber, protection caps, soft touch elements, cable ducts, casters, profiles, and 2K components. It has good adhesion with Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general and has a service temperature range of -40-125°C.

MOCOM Compounds ALFATER® XL A65E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with a natural color, white, or black. It has high viscosity and good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture market segments for extruded parts, blow molded parts, coextrusion profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components.

MOCOM Compounds ALFATER® XL A85E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with natural color, black color, and high viscosity. It has good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the Automotive, building and construction, Machinery, electrical and electronic, and Furniture industries for extruded parts, blow molded parts, and coextrusion. It can be used for profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct, as well as 2K components. Its adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer has been tested generally.

MOCOM Compounds ALFATER® XL A80E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black color and high viscosity. It features good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture sectors and can be used for extruded parts, blow molded parts, coextrusion, profile, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALFATER® XL A60E 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with high viscosity, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for use in automotive, building and construction, machinery, electrical and electronic, and furniture applications, such as for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air ducts. It also has adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general. All of these properties make it a versatile material for various applications.

MOCOM Compounds ALFATER® XL D40I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) with good recovery, weathering resistance, chemical resistance, ozone resistance, and hot air resistance. It is suitable for injection molding and extrusion processes, with melt temperatures of 190-230°C and 200-240°C respectively, and mold temperatures of 10-70°C. Additionally, it has good adhesion to Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general. It is mainly used in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and is typically applied to seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, profiles, cable jacketing, conduits, and 2K components.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive LM-ETFE AH-600 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long. It offers a lower melting compound that results in a wider process window and better compatibility with some polyamide nylons for co-extrusion.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-600C is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and unsurpassed protection against static build-up. AH-600C offers a lower melting compound that results in a wider process window and better compatibility with some polyamide nylons for co-extrusion. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-3000 is a semiconductive modified copolymer of ethylene and tetrafluoroethylene used in applications where strong adhesion to polyamide polymers, especially nylon 12, is required. It also exhibits high permeation resistance to many fluids and gasses, especially automotive fuels. It is processed using conventional melt extrusion methods and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive ETFE AH-700 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. Non-Conductive AH-700 balances performance and economics. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE LH-8000 is a new addition to the LM-ETFE AH Series. This ETFE (tetrafluoroethylene-ethylene copolymer) has a functional group polymerized directly in to the chain backbone, allowing it to adhere to other materials. This resin is ideal for producing multi-layer structures in a one-step process without the need for surface treatment or a separate adhesive layer. LH-8000 offers the lowest melting point of all the AH series resins, yet with the same desirable properties of other ETFEs, including non-stick, excellent processability, and superior chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-3000L is a semiconductive modified copolymer of ethylene and tetrafluoroethylene used in applications where superior stress-cracking properties and strong adhesion to polyamide polymers, especially nylon 12, are required. It also exhibits high permeation resistance to many fluids and gasses, especially automotive fuels. It is processed using conventional melt extrusion methods and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-2000 is a modified copolymer of ethylene and tetrafluoroethylene used in applications where strong adhesion to polyamide polymers, especially nylon 12, is required. This product also exhibits high permeation resistance to many fluids and gasses, especially automotive fuels. It is processed using conventional melt extrusion methods and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-700C is a compound designed for use in automotive fuel hoses. This functionalized polymer is ideal for hose constructions that require chemical resistance, permeation resistance, and unsurpassed protection against static buildup. AH-700C balances performance and economics. It is supplied in cylindrical pellet form, with pellets measuring approximately 0.080 inches in diameter and 0.125 inches in length.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-5000 is a modified copolymer of ethylene and tetrafluoroethylene used in applications where strong adhesion to polyamide polymers, especially nylon 12, is required. This modified ETFE contains functionality which forms a strong chemical bond with polyamides. It is processed using conventional melt extrusion methods and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon+™ Non-Conductive ETFE AH-800 is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and an unsurpassed bond to polyamide materials. AH-800 has a higher upper-end temperature rating (approaching 200°C) and improved resistance to stress cracks at elevated temperatures. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-700 is a functionalized polymer designed for use in automotive applications. It is based on ETFE and has been chemically modified to adhere to polyamides during the co-extrusion process. The compound is available in pellet form, measuring approximately 0.080 inches in diameter and 0.125 inches in length.

AGC Chemicals Americas, Inc. Fluon+™ ETFE AH-800C is a compound designed for use in automotive fuel hose. This product is ideal for hose constructions which require chemical resistance, permeation resistance, and unsurpassed protection against static build-up. AH-800C has a higher upper-end temperature rating (approaching 200°C) and improved resistance to stress cracks at elevated temperatures. These products are supplied in cylindrical pellet form. These pellets are approximately 0.080 inches in diameter x 0.125 inches long.

AGC Chemicals Americas, Inc. Fluon+™ LM-ETFE AH-2100 is a modified copolymer of ethylene and tetrafluoroethylene used in applications where strong adhesion to polyamide polymers, especially nylon 12, is required. It also exhibits high permeation resistance to many fluids and gasses, especially automotive fuels. It is processed using conventional melt extrusion methods and is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon+™ PFA EA-2000 is a perfluoro resin which has been functionalized to include an adhesive group within the polymer backbone. The perfluoro backbone gives the material excellent electrical characteristics, and heat and chemical resistance, while the adhesive functionality facilitates adhesion to other materials in a one-step process, without the need for surface treatment or a separate adhesive layer. Example materials include glass cloth, polyimide, or various metals. This grade is semi-commercialized and may be available upon request. This material is supplied as pellets and packaged in 25kg plastic bags.

Neoflon EFEP RP-5000, in pellet and solid forms, shares key features with RP-4020, including chemical resistance, good adhesion, and a low melting point. Targeting similar markets, it finds application in automotive fuel systems, oil, gas, and mining exploration, as well as semiconductor manufacturing. With its processing methods covering coextrusion, compression molding, extrusion, hot melt, and injection molding, it caters to a diverse range of end uses such as automotive fuel lines, blown containers, fuel hoses, and semiconductor applications.