Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
Value Units Test Method / Conditions Tensile Strength (Type 2) 5.4 MPa ISO 37 Tear Strength (Method Ba) 22.0 kN/m ISO 34-1 Elongation at Break (Type 2) 350.0 % ISO 37 Shore Hardness A (15s) 60.0 - ISO 868 Tensile Stress at 100% Elongation (Type 2) 2.5 MPa ISO 37 - Physical Properties
Value Units Test Method / Conditions Density 940.0 kg/m³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Compression Set (22h, at 70°C, 25%, Type A) 38.0 % ISO 815 Compression Set (22h, at 100°C, 25%, Type A) 37.0 % ISO 815 Compression Set (72h, at 22°C, 25%, Type A) 22.0 % ISO 815 Compression Set (72h, at 125°C, 25%, Type A) 55.0 % ISO 815 - Typical Properties
Value Units Test Method / Conditions Service Temperature (depending on load, geometry, etc.) - 40 to 125 °C - Moisture Content max. 0.1 % - - Electrical Properties
Value Units Test Method / Conditions Tracking Resistance (CTI) 600.0 - IEC 60112 - Flammability
Value Units Test Method / Conditions Flammability (1.5 mm) HB class UL 94 Flammability (3.0 mm) HB class UL 94 Glow Wire (GWFI, 650°C, 2mm) Passed - DIN EN 60695 - Processing Information (Extrusion)
Value Units Test Method / Conditions Die Temperature 190 - 210 °C - Melt Temperature 190 - 230 °C -
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Technical Data
Storage & Handling
- Storage Conditions
Store in dry, tighlty sealed protected from light not above 30°C.