Knowde Enhanced TDS
Identification & Functionality
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Flammability
- Processing Information (Extrusion)
Value | Units | Test Method / Conditions | |
Tensile Strength (Type 2) | 21.4 | MPa | ISO 37 |
Tear Strength (Method Ba) | 71.0 | kN/m | ISO 34-1 |
Elongation at Break (Type 2) | 580.0 | % | ISO 37 |
Shore Hardness D (15s) | 40.0 | — | ISO 868 |
Tensile Stress at 100% Elongation (Type 2) | 10.0 | MPa | ISO 37 |
Value | Units | Test Method / Conditions | |
Density | 950.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Coeffecient of Linear Thermal Expansion (parallel) | 9.1 | E⁻⁶/K | ISO 11359-1/-2 |
Coeffecient of Linear Thermal Expansion (normal) | 14.1 | E⁻⁶/K | ISO 11359-1/-2 |
Compression Set (22h, at 70°C, 25%, Type A) | 63.0 | % | ISO 815 |
Compression Set (22h, at 100°C, 25%, Type A) | 67.0 | % | ISO 815 |
Compression Set (72h, at 22°C, 25%, Type A) | 43.0 | % | ISO 815 |
Compression Set (72h, at 125°C, 25%, Type A) | 94.0 | % | ISO 815 |
Value | Units | Test Method / Conditions | |
Service Temperature (depending on load, geometry, etc.) | - 40 to 125 | °C | — |
Moisture Content | max. 0.1 | % | — |
Value | Units | Test Method / Conditions | |
Tracking Resistance (CTI) | 600.0 | — | IEC 60112 |
Value | Units | Test Method / Conditions | |
Flammability (1.5 mm) | HB | class | UL 94 |
Flammability (3.0 mm) | HB | class | UL 94 |
UL Recognition | yes | — | — |
Glow Wire (GWFI, 650°C, 2mm) | Passed | — | DIN EN 60695 |
Fire Behavior FMVSS (2.0 mm) | Passed | — | FMVSS 302/DIN 75200 |
Value | Units | Test Method / Conditions | |
Die Temperature | 190 - 220 | °C | — |
Melt Temperature | 190 - 230 | °C | — |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Technical Data
Storage & Handling
- Storage Conditions
Store in dry, protected from light tightly sealed.