Products in Automotive Lighting

MOCOM Compounds ALCOM® LDDC PMMA 1000 UV 18124 BK1074-11 is a polymethylmethacrylate base polymer with a UV stabilized filler/additive system suitable for applications such as lamp covers, display elements, operating elements, and light transparent components in automotive and lighting markets. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 3-4 hours and 80°C in an air circulating dryer for 4-6 hours, with a maximum moisture content of <0.02%. For injection molding, melt temperature should be between 220-280°C and mold temperature should be between 50-80°C.

MOCOM Compounds ALCOM® LB ECO PC+ABS 1000 SL WT1023-21 is a pre-dried injection molding grade with a polycarbonate + acrylonitrile butadiene styrene blend. It is highly reflective, contains recycled material, has anti-squeak modifications, and is opaque. It is used in the automotive, electrical and electronic, and lighting markets and is typically used for light guides and reflectors. When processing injection molding, the melt temperature should be 240-280°C and the mold temperature should be 70-100°C.

MOCOM Compounds ALCOM® PC740/26 UV WT1407-04LB is a high heat polycarbonate base polymer with a special filler/additive system that is UV stabilized and highly reflective, opaque, and easy to flow. It is suitable for automotive and lighting applications such as light guides, reflectors, and light blocking components. During processing injection molding, the melt temperature should be between 330-340°C and the mold temperature should be between 120-140°C.

MOCOM Compounds ALCOM® PC 740/171 GY1127-05LD is a polycarbonate base polymer with a special filler/additive system that provides translucent, light scattering, and high light diffusion properties as well as easy flow. It is used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements, and is approved by BQF5404. When injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. It is important to store the material in dry conditions and protect it from light.

MOCOM Compounds ALCOM® PC 740/4 WT1172-09LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering and high light diffusion for easy flow. This material is approved by GS93016 and is suitable for use in automotive and lighting applications for lamp covers, display elements and operating elements. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds Alcom® PWL 10/1.1 WT1302-05LB is a polycarbonate injection molding grade material containing a special filler system of 15% that provides highly reflective and opaque properties. It is UV stabilized and provides easy release during demolding, and is often used in the automotive industry for lighting and light blocking components, such as light guides and reflectors.

MOCOM Compounds ALTECH® PC-HT A 1000/500 is a high heat polycarbonate with special features that make it suitable for automotive and lighting applications. It should be stored in a dry and protected environment at a temperature not exceeding 30°C. The recommended processing injection molding temperatures are a melt temperature of 320-340°C and a mold temperature of 100-130°C. Typical applications include housings and light switches.

MOCOM Compounds ALCOM® LD2 PC 1000 17059 GY1051-17 is a polycarbonate-based polymer containing a special filler and additives, providing high light transmission and light scattering. It is used for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved under GS93016.

MOCOM Compounds ALCOM® PC 740/4 CC1119-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light transmission, and good flow. It has been approved by GS93016 and is suitable for the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C is required.

MOCOM Compounds ALCOM® PC 740/4 WT1065-12LD2 is a polycarbonate-based injection molding grade with a special filler/additive system, featuring translucent and high light diffusion, and processing stabilized properties. It is suitable for automotive and lighting market segments and is typically used for lamp covers, display elements, and operating elements. The recommended melt temperature is 270-310°C, and mold temperature is 80-110°C. Additionally, the product is GS93016 approved.

MOCOM Compounds ALCOM® PC 740/4 GY1320-04LD is a polycarbonate base polymer with a special filler/additive system that provides translucent, light scattering, and high light diffusion properties, as well as good flow. It is approved by GS93016 and is suitable for use in automotive and lighting applications such as lamp covers, display elements, and operating elements. Processing injection molding temperature ranges from 270-310°C, with a mold temperature of 80-110°C. To ensure proper performance, this material must be stored in a dry, light-protected environment.

MOCOM Compounds ALTECH® PS-HI A 1000/901 WT1260-20 is a polystyrene base polymer with impact-easy release (demolding) properties, designed for injection molding grade applications. It is suitable for use in the Automotive, electrical and electronic, and building and construction market segments, to make injection molded parts such as bezels and housings. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or in an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding should be done with a melt temperature of 180-260°C and a mold temperature of 10-70°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16156 GY1118-16 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features the properties of being translucent, light scattering, high light diffusion, and having good flow characteristics. It is approved by GS93016 and is suitable for Automotive and Lighting market segments, with typical applications such as lamp covers, display elements, and operating elements. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature should be 80-110°C. When storing this material, it should be kept dry and protected from light.

MOCOM Compounds ALCOM® PC 740/4 UV WT1201-08LD is a polycarbonate base polymer with a special filler/additive system offering translucency, light scattering, high light diffusion, and UV stabilization, as well as easy flow properties. It is primarily used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements, and is approved by GS93016. This polymer is injection molded at a melt temperature range of 270-310°C and a mold temperature range of 80-110°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15003 CC1003-15 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized, translucent, light scattering, and has high light diffusion and easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting market segments. The recommended processing injection molding parameters are a melt temperature of 270-310°C and a mold temperature of 80-110°C. This product has been approved by GS93016.

MOCOM Compounds ALCOM® PC 740/4 UV WT1306-07LD is a polycarbonate base polymer with a special filler/additive system that provides high light transmission and light scattering, as well as good flow and UV stabilization. It is used in the automotive and lighting markets mainly for applications such as lamp covers, display elements and operating elements, and is approved by GS93016.

MOCOM Compounds ALCOM® PC 740/4 UV WT1240-10LD is a polycarbonate-based material with a special filler/additive system designed for high light transmission, light scattering, and UV stability. It is suitable for Automotive and Lighting market segments for applications such as lamp covers, display elements, and operating elements. Processing Injection molding involves a melt temperature of 270-310°C and a mold temperature of 80-110°C. Pre-Drying Conditions require 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours. It has been approved by GS93016 and should be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® LB ABS 1000 15018 WT1029-15 is a pre-dried acrylonitrile/butadiene/styrene/copolymer containing a special filler, designed for highly reflective and opaque automotive and lighting components such as light guides and reflectors. It should be processed with a melt temperature of 220-260°C and a mold temperature of 50-80°C. The maximum moisture content should not exceed 0.02%.

MOCOM Compounds ALCOM® PC 740/4 UV WT1370-07LD is a polycarbonate-based polymer with a special UV-stabilized filler/additive system that offers translucent, light-scattering, and high-light-diffusion properties. It is used in the automotive and lighting markets and is suitable for applications such as lamp covers, display elements, and operating elements. It has been approved by GS93016 and is suitable for injection molding processing with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® LD2 PC 9000 UV 14019 WT1030-14 is a polycarbonate-based polymer with a special filler/additive system that is UV-stabilized and has translucent, light scattering, and high light diffusion properties. It is suitable for automotive, lighting, and other light transparent components and injection molded parts, such as lamp covers, display elements, and operating elements. For processing injection molding, melt temperatures should be between 270-310°C and mold temperatures should be between 80-110°C.

MOCOM Compounds ALCOM® LDDC PMMA 1000UV18123 BK1016-11 is a translucent, UV stabilized Polymethylmethacrylate polymer used for Automotive, Lighting, and interior decoration/finishing, light transparent components, and Black Panel-Technology applications such as lamp covers, display elements, and operating elements. Pre-drying conditions involve 80°C in a dry air (dessiccant) dryer for 3-4 hours and 80°C in an air circulating dryer for 4-6 hours with a maximum moisture content of less than 0.02%. For processing injection molding, the melt temperature should be between 220-270°C and the mold temperature should be between 50-80°C. It should be protected from light.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15015 CC1026-15 is a polycarbonate base polymer with a special filler/additive system, UV stabilized for translucent, light scattering characteristics dependent on wall thickness. It is suitable for use in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements, and is approved by GS93016.

MOCOM Compounds ALCOM® HTC 300/1 GY1055-10LD is a high-temperature copolyester base polymer with a special filler/additive system that has translucent, light-scattering, and high light diffusion properties. It is typically used for automotive and lighting applications such as lamp covers, display elements, and operating elements. To ensure the best performance, it should be stored in a dry, light-protected environment. When processing injection molding, a melt temperature of 260-280°C and a mold temperature of 50-70°C should be used.

MOCOM Compounds ALTECH® PP-H A 4940/106 MR40 is a Polypropylene Homopolymer with a 40% talcum filler/additive system that is heat stabilized, processed stabilized, and has an easy release (demolding). Injection molding should be done at a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is widely used in the automotive, building and construction market segments, primarily for injection molded parts, interior decoration/finishing and exterior parts. Typical applications include different automotive powertrain parts, housings, and functional components. To ensure optimal shelf life, the material should be stored dry, protected from light, and at a temperature of no more than 30°C.

MOCOM Compounds ALCOM® LB PC+ABS 1000 19037 RD1036-19 is an injection molding grade polymer blend of polycarbonate and Acrylonitrile Butadiene Styrene that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for applications such as light guides and reflectors. During processing injection molding, a melt temperature of 250-280°C and mold temperature of 70-100°C should be maintained. After processing, the material should be stored in a dark environment to protect it from light.

MOCOM Compounds Alcom® TCD PA6 5060 FR 15090 is a polyamide 6 (PA6) material that contains a special filler system, making it thermally conductive, electrically insulating, and halogen-free flame retardant. It is also opaque and heat stabilized, making it suitable for use in radiator systems and cooling systems in the automotive, machinery, electrical and electronic, and lighting industries.

MOCOM Compounds ALCOM® PC 740/4 RD1223-05LD is a special red, translucent filler similar to RAL 3003. It has light scattering and high light diffusion properties, making it ideal for automotive and lighting market segments. It is used for lamp covers, display elements, and operating elements and has been approved by GS93016. The recommended processing injection molding melt temperature is 270-310°C and the mold temperature is 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV CC1174-13LD is a polycarbonate base polymer with a special filler/additive system that is UV-stabilized and has high light transmission, light scattering, and high light diffusion. It is suitable for applications such as lamp covers, display elements, and operating elements in the automotive and lighting market segments.

MOCOM Compounds ALCOM® PC 740/4 GY1281-04LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light transmission, and good flow. It has been approved by GS93016 and is widely used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements. Injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. The product should be stored in a dry, light-protected environment to ensure its quality.

MOCOM Compounds ALCOM® PC 740/4 CC1084-07LD is a polycarbonate base polymer with a special filler/additive system designed for light scattering and high light diffusion. It is commonly used in applications such as lamp covers, display elements, and operating elements in the automotive and lighting markets. The injection molding melt temperature is 270-310°C and the mold temperature is 80-110°C. It has also been approved by GS93016.

MOCOM Compounds ALTECH® PP-H A 3020/100 GB20 is a Polypropylene Homopolymer with 20% glass beads, heat stabilized, easy release (demolding), and processing stabilized. It is suitable for building and construction, automotive, packaging, and injection molded parts, exterior parts, clothing/fasteners, and interior decoration/finishing applications. Pre-drying conditions are in a dry air (dessiccant) dryer 80-120°C for 2-3 hours, or an air circulating dryer 80-120°C for 2-4 hours. Processing Injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be dry and stored in a cool place, not above 30°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1102-04LD is a special filler base polymer polycarbonate that is UV stabilized, has light scattering, high light transmission, and easy flow properties. It is GS93016 approved and is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® PC 740/4 UV CC1135-11LD is a polycarbonate base polymer featuring a special filler/additive system which provides light scattering and high light diffusion. It is UV stabilized and has good flow properties, making it suitable for automotive and lighting applications such as lamp covers, display elements, operating elements, and other light transparent components.

MOCOM Compounds ALCOM® PC 740/4.12 UV GY1098-13LD is a polycarbonate with a special filler/additive system that is UV stabilized, translucent, light scattering, high light diffusion, and processing stabilized, easy flow. It is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. The product should be stored in a dry place, away from direct light, to ensure optimal performance.

MOCOM Compounds ALCOM® PC 740/4 UV WT1081-08LD2 is a polycarbonate base polymer filled with a special filler, stabilized with UV protection, and featuring special characteristics such as being translucent, light scattering, highly diffusing light, and having good flow. It is commonly used in the automotive and lighting markets for lamp covers, display elements, and operating elements. This polymer is approved according to GS93016 and can be processed by injection molding with melt temperatures of 270-310°C and mold temperatures of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV RD1472-05LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized. It offers features such as translucency, light scattering, high light diffusion, and good flow, making it suitable for applications such as lamp covers, display elements, and operating elements in the automotive and lighting market segments. It is also approved to GS93016.