Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Optical Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 2450.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 76.0 | MPa | ISO 178 |
| Tensile Modulus | 2400.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 66.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 6.0 | % | ISO 527 |
| Tensile Elongation at Break | 70.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Impact Strength (Charpy, at -40°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 12.0 | kJ/m² | ISO 179/1eA |
| Notched Impact (Charpy, at -40°C) | 12.0 | kJ/m² | ISO 179/1eA |
| Value | Units | Test Method / Conditions | |
| Density | 1190.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 142.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 124.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.02 | % | — |
| Value | Units | Test Method / Conditions | |
| Total Transmission T(Y) (d=1,0mm, A, 2°) | 39.0 | % | ISO 13468 |
| Total Transmission T(Y) (d=4,0mm, A, 2°) | 0.0 | % | ISO 13468 |
| Haze T(Y) (d=1.0 mm, A, 2°) | 96.0 | % | ISO 13468 |
| Haze T(Y) (d=4.0 mm, A, 2°) | 0.0 | % | ISO 13468 |
| Half Power Angle T(Y) (d=1mm, A, 2°) | 54.0 | Degree | — |
| Value | Units | Test Method / Conditions | |
| Flammability (0.75 m) | V - 2 | class | UL 94 |
| Flammability (1.5 mm) | HB | class | UL 94 |
| UL Recognition | yes | — | — |
| Glow Wire (GWFI, 850°C, 1mm) | Passed | — | DIN EN 60695 |
| Glow Wire (GWFI, 850°C, 2mm) | Passed | — | DIN EN 60695 |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 270 - 310 | °C | — |
| Mould Temperature | 80 - 110 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 17.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 300.0 | °C | — |
| MVR Load | 1.2 | kg | — |
| Shrinkage (24h) | 0.6 - 0.9 | % | ISO 294-4 |
Regulatory & Compliance
- Certifications & Compliance
- OEM Specifications
- OEM Standards
Technical Details & Test Data
- Pre-Drying Conditions
- 120 °C in a dry air (dessiccant) dryer for 2-4 h
- 120 °C in an air circulating dryer for 4-12 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light.