Products in Automotive Fluids & Lubricants

LUBIMAX® PIB 1300 is a member of the LUBIMAX® Polyisobutene Series. LUBIMAX® PIB 1300 is colorless, chemically inert, non-drying and highly resistant to oxidation and photodegradation. This product range is non-toxic and will not leave residue post volatilization or thermal decomposition.

RIANOX® L57 is a liquid aromatic amine antioxidant, used for lubricating oil and grease.

NanoFLON® PIB25 is a stable, 25% dispersion of premium grade submicron polytetrafluoroethylene (PTFE) in poly-isobutene and ester oil. These products are ideal for use in extreme pressure, anti-wear and low friction lubricants under high or low temperatures.

HYDROCAL™ 1200 naphthenic base stocks are produced exclusively by Calumet using a multi-stage hydrotreating process operating at pressures above 2500 psi. This process offers the unique ability to produce naphthenic base stocks that meet currently established performance standards as well as standards to be developed in the future.

CalEster™ N is suitable for a broad range of lubricant applications where a combination of lower viscosity and a wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

NA-SUL® AS is an ashless rust and corrosion inhibitor for industrial lubricants, distillate fuels, and metalworking specialties.

ZEROL® 150 lubricant range is based on synthetic Alkylbenzene (AB) and has been developed for use in refrigeration, heat pumps and air conditioning compressors. The miscibility of ZEROL lubricants with hydrofluorocarbon type refrigerants is excellent. Their low floc point, antifoaming properties and good stability at high temperature provides optimum lubrication even under the most severe conditions.

NA-SUL® CA-50 is a premium non-staining rust and corrosion inhibitor with excess alkalinity in the form of oil-soluble calcium carbonate.

NA-SUL® 450 (formerly KX450) is a liquid emulsifiable rust preventive concentrate. NA-SUL® 450 easily forms stable emulsions when added to water with moderate stirring. The resulting emulsions give excellent rust protection for steel parts during storage and transportation. Calcium based NA-SUL® 450 contains no mineral oil but instead uses a biodegradable ester carrier.

CalEster™ MW is suitable for a broad range of lubricant applications where a combination of lower viscosity and wide operating temperature capability are desired including turbine oils, engine oils, air compressor oils, hydraulic fluids, and refrigeration lubricants. CalEster™ Synthetic Polyol Esters Calumet Specialty Products Partners, L.P. Offers a complete line of high purity synthetic polyol esters for use in high performance lubricant applications. With over 50 years of experience in manufacturing synthetic polyol esters, Calumet’s lubricant grade esters are engineered to deliver the highest performance under the most demanding conditions.

LUBIMAX® PIB 950SA is a member of LUBIMAX® Polyisobutene Series. LUBIMAX® PIB 950SA is colorless, chemically inert, non-toxic, non-drying and highly resistant to oxidation and photodegradation. This product range is non-toxic and will not leave residue post volatilization or thermal decomposition.

NA-LUBE® AO-142 is a liquid diphenylamine based antioxidant for synthetic and mineral oil based lubricants and greases.

NA-LUBE® AO-210 is a general purpose ashless phenolic antioxidant for industrial lubricants, greases, transformer oils and fuels.

Nanol® is a patented discovery and represents an innovative lubricant additive, which significantly reduces friction and wear of surfaces due to a thin protective layer formed by copper nanoparticles.Nanol® POWER+ E is optimized for Power generation units.The unique action behind the Nanol® lubrication technology lies within the precise amount of perfectly distributed copper nanoparticles, constructing a physical layer of copper atoms only on the surfaces of friction and wear.

NA-SUL® EDS is an ashless rust and corrosion inhibitor used in a wide variety of fuels and lubricants.

NanoFLON® PAO-30 is a stable, 30% dispersion of premium grade submicron polytetrafluoroethylene (PTFE) in poly-alpha-olefin (PAO). These products are ideal for use in extreme pressure, anti-wear and low friction lubricants under high or low temperatures.

NA-SUL® BSB is a premium non-staining rust and corrosion inhibitor with excess alkalinity in the form of barium hydroxide.

NA-LUBE® BL-1208 is a multifunctional premium ashless R&O additive package for industrial oils that exhibits outstanding antioxidant performance in ASTM D 2272, RPVOT.

ZEROL® PAG 100 are fully formulated polyalkylene glycol lubricants designed specifically for application with R-134a in MAC systems. Shrieve ZEROL® PAG 100 are produced in a range of ISO viscosity grades of 46, 100 and 150, in accordance with the typical requirements for most system designs.

ZEROL® PAG 46 are fully formulated polyalkylene glycol lubricants designed specifically for application with R-134a in MAC systems. Shrieve ZEROL® PAG 46 are produced in a range of ISO viscosity grades of 46, 100 and 150, in accordance with the typical requirements for most system designs.

RIANOX® 1135 is an active, liquid hindered phenolic antioxidant for polyols, polyurethanes, and mineral or synthetic lubricants.

HYDROCAL™ 500 naphthenic base stocks are produced exclusively by Calumet using a multi-stage hydrotreating process operating at pressures above 2500 psi. This process offers the unique ability to produce naphthenic base stocks that meet currently established performance standards as well as standards to be developed in the future.

NA-SUL® BSN-HT is a high performance rust and corrosion inhibitor offering exceptional rust protection with outstanding high temperature stability and good demulsibility in petroleum and synthetic lubricants.

Fluoro GS 100 is a 4 µm polytetrafluoroethylene (PTFE) micropowder with a narrow particle size distribution. Fluoro GS designates a series of powders are made from unsintered, suspension grade virgin PTFE. The products in this series are characterized by the uniform, crystalline structure of PTFE with increased slip and abrasion properties.

LUBIMAX® PIB 1000 is a member of LUBIMAX® Polyisobutene Series. LUBIMAX® PIB 1000 is colorless, chemically inert, non-drying and highly resistant to oxidation and photodegradation. This product range is non-toxic and will not leave residue post volatilization or thermal decomposition.

VBASE® 100S base oil provides exceptional hydrolytic stability, efficiency, and compatibility to enable the formulation of high-performance Environmentally Acceptable Lubricants (EALs). VBASE Oil is based on new Secondary Polyol Ester™ technology.Increased System Efficiency - High Viscosity Index and High Shear Stability Enable Reduced Flow Losses and Viscous Drag Enhanced Fluid Lifetime and Reliability - Excellent Thermo-Oxidative Stability, Varnish Resistance, and Hydrolytic StabilitySuperior Compatibility - Compatible with all major base oils and sealsEnvironmentally Acceptable - Biobased, Biodegradable, Non-Toxic, Non-bioaccumulatingUSDA Certified Biobased, NSF HX-1: Safe for food contact

NA-LUBE® EP-5218 is a light colored, low odor sulfurized fatty acid ester with excellent extreme pressure properties.

Syncal™ OB408 is multifunctional specialty overbased calcium sulfonates manufactured from long chain alkylbenzene sulfonic acids. These products exhibit good oil solubility, detergency, and excellent high temperature stability. Not only are these products good TBN boosters, they are also excellent feedstocks for manufacturing overbased calcium sulfonate grease. Greases manufactured from either Syncal™ OB408 tend to convert readily and exhibit outstanding gel strength retention properties.

NA-LUBE® EP-5310 is a light colored, low odor inactive sulfurized fatty acid ester/fatty oil with excellent extreme pressure properties.

HeBoLub® O30 is a highly concentrated, stable oil dispersion of ultrafine hexagonal Boron Nitride particles in a high quality base oil. When added to lubricants, HeBoLub® O30 helps to reduce friction and wear.

RIANOX® L67 is a liquid aromatic amine antioxidant, used for lubricating oil and grease.

J-Cut 55 QT is a heavy duty dark cutting oil developed for difficult machining operations such as deep hole boring, gun drilling and trepanning. Extensive field experience has shown that J-Cut 55 QT gives exceptional production rates and extended tool life. The viscosity is designed to give maximum lubrication combined with the proper cooling and flushing of chips. J-Cut 55 QT does contain active sulfur and should not be used on non-ferrous metals because of staining.

BT22 LP - LOW POUR - is a medium viscosity, lubricant base oil designed specifically to help customers in the lubrication industries meet their production quality standards in application, where a low pour point is essential. This renewable base oil is 99% bio-based and offers a pour point of -42°C.

Neutral Calcium Sulfonates Syncal™ 45LC are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process. Syncal™ 45LC is especially low with a maximum chloride value of 50 ppm guaranteed.

NA-LUBE® EP-5425 is a light colored, low odor sulfurized olefin/fatty oil with excellent extreme pressure properties.

NA-SUL® CA-1089 is a premium rust inhibitor for petroleum and synthetic lubricants, rust preventive fluids and metalworking specialties. It provides outstanding non-staining properties with excellent demulsibility and filterability, both dry and wet. It is compatible with a wide range of additives and base stocks.