Products in Shingles & Tiles: Resins, Binders & Matrix Materials

Texicryl® 17-0376 is a modified styrene acrylic copolymer emulsion designed for use in high performance anticorrosive primers. It has been specifically designed for the formulation of low VOC waterbased anticorrosive primers which provide excellent salt spray (to ASTM B117), humidity and prohesion resistance on clean metal substrates.

Crystic® Polyester Resin 921 is an un-accelerated, orthophthalic, unsaturated polyester resin with a low viscosity to accept the maximum level of filler particles. It has been developed specifically for polymer concrete. Crystic® 921PALV is a lower viscosity, thixotropic version of this product. It is suitable for pigmented castings filled to a low level or not filled at all.

Crystic® Polyester Resin 406COS is a non-thixotropic, non-accelerated, orthophthalic unsaturated polyester resin used for casting, artificial marble, and solid surface applications. This product has a 5-minute gel time. It contains UV absorbers, allowing very good resistance to yellowing and UV radiation.

Crystic® Resin S15.6 is a very flexible unsaturated polyester resin based on adipic acid. It can be used alone or in conjunction with other polyester resins for the manufacturing of flexible products. Impregnating resins particularly isophtalic resins can be flexibilised by addition of Crystic® Resin S15.6 without any significant impact on the chemical resistance properties.

Crystic® Polyester Resin 125PA is a quality orthophthalic-based unsaturated polyester resin developed specifically for the manufacture of GRP moldings. This medium-viscosity polyester resin meets the requirements of BS 3532:1990 as a type "A" resin and can be used for flat surface laminations. Laminates made with this product have good mechanical strength, high rigidity and impact resistance, and excellent dimensional stability. When used with the recommended curing system, its curing properties make it especially suitable for fast production processes.

Crystic® Orthophthalic Spray Topcoat 408PA White is a pre-accelerated flowcoat with excellent scuff resistance, designed for use in general purpose GRP moldings. It is based on a high quality orthophthalic unsaturated polyester resin and is suitable for all general molding requirements. The product is pigmented using a highly UV resistant grade of titanium dioxide.

Crystic® Polyester Resin 272 is an isophthalic polyester resin. It is recommended for use in high-performance applications using filament winding, pultrusion, and centrifugal or contact molding processes. The fully cured laminates have high mechanical strength and excellent strength retention in wet environments at temperatures up to 60ºC.

Crystic® Polyester Resin 1124PA is an orthophthalic, low-viscosity, unsaturated polyester resin. It is supplied as a solution dissolved in monomeric styrene. This product is pre-accelerated to give a sufficient pot life for contact molding using Andonox® KP9 at normal ambient temperatures. It has been formulated to give a rapid cure time while retaining a usable pot life and a normal peak exotherm temperature. For an extra-rapid cure, the use of acetoacetonyl peroxide (Andonox® PD40) is recommended.

Crystic® Polyester Resin 397PA is a pre-accelerated isophthalic/neopentyl glycol polyester resin with a high heat deflection temperature and good water and chemical resistance. It is recommended for the fabrication of high-performance laminates for critical applications in aggressive environments. This product is suitable for contact molding and filament winding processes.

Crystic® Polyester Resin 195 is a light-stabilized polyester resin containing styrene and methyl methacrylate. When combined with powder-bonded "E" glass, it is recommended for the production of maximum-clarity GRP sheeting with up to 80% light transmission. This product has a 25-minute gel time.

Crystic® Polyester Resin U904LVK is an orthophtalic, pre accelerated, non thixotropic, unsaturated polyester resin. It has to be used when good mechanical properties and good heat resistance are required. The product has been designed to be catalysed with a conventional MEKP at 50% while giving a very fast demold time under quite low exotherm.

Crystic® Vinyl Ester Resin VE679-03PA is a pre-accelerated, DCPD modified, vinyl ester resin developed for use as a infusion resin with a wide range of gel times with various catalysts. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable moldings with an enhanced surface finish.

DISTITRON® 100 BSX15 - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks through hand lay up and spray up method.

DISTITRON® 429 V8 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat,statues,general purpose through casting,mix with fillers and/or additives method.

DISTITRON® 1629 V2 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce reinforced plastics,general purpose through injection molding,rtm,press and vacuum molding method.

ENYDYNE® H 61104 TAPF - Unsaturated polyester resin in styrene,DCPD. It is used to produce furnitures and sanitary through hand lay up and spray up method.

Polydyne® 5005 is used for general purpose and gel coat formulation. Main applications areas are composites, textile industry etc.

NORSODYNE® H 13212 TAE - Unsaturated polyester resin in styrene,Orthophthalic. It is used as general purpose in hand lay up and spray up method.

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

ENYDYNE® H 66126 TAE - Unsaturated polyester resin in styrene,DCPD. It is used to produce pipes and tanks through hand lay up and spray up method.

DISTITRON® I 100 SV1,5 - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through vacuum infusion method.

DISTITRON® 3519 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce production of gelcoat through mix with fillers and/or additives.

Norsodyne® BR-270A - multicolor application, flexible type, thixotropic, good workability, for rods production. Main applications areas are leisure and clothing etc.

Distitron® 3519A1V5 - preaccelerated, UV stabilized. Main applications areas are furniture, home and domestic applications etc.

DISTITRON® 161 T100Z - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce buttons through casting (rods) method.

Stypol® RSP10021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

NORSODYNE® R 26391 T - Unsaturated polyester resin in styrene,Ortophthalic-Neopentylic. It is used to produce relining,cipp,pipes and tanks.

DISTITRON® 110 SXZ - Unsaturated polyester resin in styrene,DCPD. It is used to produce reinforced plastics,general purpose through hand lay up and spray up method.

Polynt Group 787-2599 - toughened vinyl ester resin offering improved fracture toughness and crack resistance; unthixed, unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

NORSODYNE® H 13239 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through hand lay up and spray up,filament winding method.

Stypol® 040-8123 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Norsodyne® PT-207 - terephthalic resin for pultrusion. Main applications areas are building and construction, industrial sector etc.

Polynt Group 787-0790 - toughened vinyl ester resin offers dramatically improved fracture toughness resistance over typical vinyl ester resins; unpromoted. Main applications areas are aeolian, aeronautical, agrochemical, agrobusiness, automotive, building and construction, composites, consumer products, home and domestic applications, industrial sector, marine, mass transports, mold manufacture railway sector etc.

Stypol® 040-8086 - pre-promoted unsaturated polyester laminating resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

DISTITRON® 518 A - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.