Products in Automotive Electronics: Good Weather Stability

SILRES® K is a solution of a condensation-curing methyl silicone resin in toluene. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® K is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® K has a very low carbon content and thus yields a high ash content when pyrolized. Composites made of SILRES® K show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® K also provides water repellency and excellent electrical insulation properties to the respective composite materials.

SILRES® H62 C is a liquid, solvent-free, one-part heat-curing phenyl silicone resin formulation. The product is ideal for impregnating the electrical coils of motors and generators. Besides, SILRES® H62 C can be used to provide hydrophobic properties to porous materials and as a binder for composites made of fibrous fillers, cloths, and woven or non-woven reinforcing materials. The formulation is ready-to-use and crosslinks under heat. While curing, SILRES® H62 C does not release chemical byproducts, so curing shrinkage is barely noticeable. The product also thermosets in thick layers, even when in contact with air. Fully cured SILRES® H62 C has excellent electrical insulation properties and outstanding long-term heat resistance. Additionally, it shows high stability against weathering, moisture, and UV light and can therefore be continuously exposed to constantly changing climatic conditions or UV radiation.

METABLEN™ SRK-200A is a silicone-acrylic-based rubber impact modifier with heat-aging resistance and impact strength. It is used for polycarbonate/acrylonitrile butadiene styrene (PC/ABS) and polycarbonate/polybutylene terephthalate (PC/PBT) in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesChemical resistanceWeather stabilityHeat resistanceHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2130 is a silicone-acrylic-based rubber impact modifier optimized for flame retardant polycarbonate (PC) resins. It adds colorability, heat-aging resistance and impact strength to PC and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2030 is a silicone-acrylic-based rubber impact modifier with excellent weatherability and super high impact strength at room temperature and low temperatures. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistanceHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2260 is a silicone-acrylic-based rubber core shell-type impact modifier that provides super high impact strength and weatherability to acrylonitrile butadiene styrene (ABS), acrylonitrile styrene acrylate (ASA) and poly methyl methacrylate (PMMA) through extrusion and moldings. It is used for esthetic exterior car components such as front grills, and housings for electronics.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2501 is a is silicone-acrylic-rubber-type impact modifier that adds hydrolysis resistance, heat-aging resistance and impact strength to polycarbonate (PC), polylactic acid (PLA) and alloy in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesGood impact strengthWeather stabilityHeat aging resistance*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2001 is a silicone-acrylic rubber-type impact modifier with high impact strength in all temperatures and excellent weatherability. It can be used with ABS, PC, PLA, and other matrix resins in a variety of automotive, aerospace and electric and electronic applications. Features Can be used with recycled plastics Good weather stability Low temperature impact resistance *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 450A is an acrylic rubber-type impact modifier with good weatherability and impact strength. It is used for polyvinyl chloride (PVC) in window frames, pipes and gutters.FeaturesHigh level of elasticity Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ W 600A is an acrylic rubber-type impact modifier with good weatherability and hydrolysis resistance. It is used for polylactic acid (PLA), polycarbonate/polybutylene terephthalate (PC/PBT) and polycarbonate/polyethylene terephthalate (PC/PBT) in 3D printer filaments and aerospace, consumer goods, and electric and electronic applications.FeaturesHigh level of hydrolysis resistance Good impact strengthMaintains weather stability*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S X-005 is a silicone-acrylic rubber-type impact modifier that provides flame retardance, hydrolysis resistance and impact strength. It is used for polycarbonates (PC) and polycarbonate blends in automotive, aerospace, consumer goods, and electric and electronic applications.FeaturesFlame retardantWeather stabilityHydrolysis resistanceImpact resistance even at low temperaturesLow friction*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ SX-006 is a silicone-acrylic rubber-type impact modifier that provides impact strength and weatherability while maintaining melt-flow ability and scratch resistance of PMMA and SAN. It also gives vivid molded-in colors like piano black. The compounded resins can be widely used in automotive exterior applications (e.g. front grill, pillar, door mirror housing). Features High impact strength in all temperature zones High modulus and excellent heat aging resistance Excellent colorability *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2100 is a silicone-acrylic-based rubber impact modifier with good colorability and impact strength. It is used for polycarbonates (PC) and polycarbonate blends, polyvinyl chloride, engineering plastics and polyolefins in a variety of automotive, aerospace, consumer goods, and electric and electronic applications. METABLEN™ S-2100 provides ductility on facial impact tests, even after immersion of coating chemicals. The effect is maintained at higher molding temperatures. BenefitsEasy to processFlame retardancy for engineering plastics and polyolefins elastomersFeaturesGood colorabilityWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures*METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group.

METABLEN™ S 2200 is a silicone-acrylic-based rubber impact modifier with an epoxy-modified shell.Compatible with Polyethylene terephthalate (PET), polybutylene terephthalate (PBT), polyamide (PA) and alloy, it provides hydrolysis resistance, heat-aging resistance and impact strength for a wide range of automotive, aerospace and electric and electronic applications.FeaturesWeather stabilityHydrolysis resistanceImpact resistance even at low temperatures *METABLEN™ is provided by Mitsubishi Chemical Corporation, a member of the Mitsubishi Chemical Group

LEXAN FXD123R is a transparent/translucent low viscosity grade for light diffusion special effects. UV-stabilized. Color package may affect performance.

SABIC's Specialties Business Low viscosity PC copolymer blend with enhanced UV stabilization and added release agent. V2 rated. Available in transparent and tinted colors This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SILRES® H 44 is a powdered, condensation-curing phenyl silicone resin with excellent solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Due to its compatibility with organic resins, SILRES® H 44 can also be used to modify or partly replace phenolic resins in the respective compounds. Compared to other silicone resins, SILRES® H 44 cures relatively quickly at elevated temperatures. It is therefore particularly suitable for fully automated production lines.

SABIC's Specialties Business ELCRES XD2322 polycarbonate (PC) copolymer resin is a UV stabilized opaque grade. This resin offers UL94 V0@1.5mm flame retardancy based on non-bromine, non-chlorine FR system, excellent low temperature ductility characteristics and processability. ELCRES XD2322 resin is an excellent candidate for a wide range of applications such as electronic vehicles (EV) and 5G devices.

SILRES® MK Flakes is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Besides, SILRES® MK Flakes is the ideal product for making tack-free prepregs with excellent storage stability. Fully cured SILRES® MK Flakes has the lowest carbon content of all WACKER silicone resins and thus yields a very high ash content when pyrolized. Composites made of SILRES® MK Flakes show long-term stability against weathering, moisture, and UV light. They can therefore be continuously exposed to constantly changing climatic conditions, UV radiation, and temperatures significantly higher than 300 °C (572 °F). SILRES® MK Flakes also provides water repellency and excellent electrical insulation properties to the respective composite materials.

SABIC's Specialties Business LEXAN BFL4000U Polycarbonate (PC) is an injection moldable non-chlorinated/brominated, unfilled, flame retardant grade with high flow. It is UV stabilized, light reflective and has an MVR of 22 (300°C/1.2kg) and a UL94 V0@1.5mm.

SILRES® MK Powder is a condensation-curing methyl silicone resin with good solubility in various organic solvents. The product can be used as a binder or as an impregnation agent for porous materials. Additionally, SILRES® MK Powder is the ideal product for making tack-free prepregs with excellent storage stability. When fully cured, SILRES MK POWDER has the lowest carbon content among all WACKER silicone resins, resulting in a high ash content when pyrolized. Composites made of SILRES® MK Powder exhibit long-term stability against weathering, moisture, and UV light. They can be continuously exposed to changing climatic conditions, UV radiation, and temperatures exceeding 300 °C (572 °F). Furthermore, SILRES® MK Powder provides water repellency and excellent electrical insulation properties to the composite materials.

SABIC's Specialties Business LNP STAT-LOY D3000IEU6 compound is based on Polycarbonate (PC) Copolymer that has been designed towards ATEX compliant applications requiring antistatic. The material has an optimized balance between surface resistivity and impact strength retention after hydro aging, and has excellent low temperature impact. The material is available in a wide range of dark and light colors, including UV stabilization. This product does not contain PFAS intentionally added during SHPP’s manufacturing process and are not expected to contain unintentional PFAS impurities. Each user is responsible for evaluating the presence of unintentional PFAS impurities.

SABIC's Specialties Business FXE9330 PC-Siloxane copolymer is a special effects fluorescent with excellent processability and low temperature impact performance. Non-chlorinated, non-brominated flame retardant product in most colors. UV-stabilized. UL rated f1/V-0/5VA.

SABIC's Specialties Business LNP KONDUIT PX11311U compound is based on Nylon 6 resin containing mineral and glass fiber. Added features of this grade include: Thermally Conductive, Electrically Insulative, Improved UV Stability and Non-Brominated, Non-Chlorinated Flame Retardant.

Arnite® TV4 241 SL is a high-performance engineering plastic renowned for its combination of high strength, rigidity, and excellent processing characteristics. These qualities make it an excellent choice for a wide range of applications in the automotive, electrical, electronic, and consumer goods sectors.

VMQ 75 B 3 M Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

VMQ 60 B 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

VMQ 50 B 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications. Silicone Rubber’s unique structure provides material flexibility, and it is consistent over a wide range of temperatures thanks to its chemical characteristics.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

VMQ 75 N 3 M2 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

VMQ 50 N 3 M1 Silicone rubber is a high-performance elastomer that is ideal for high and low-temperature applications.The unique structure of silicones provides material flexibility which is consistent over a wide range of temperaturesMain advantages of silicone rubber are its combined chemical and heat resistanceSilicones offer a typical working temperature ranging from -60°C up to +250°CThe electrical properties of silicone are excellentIts resistance to weathering and ozone attack is outstanding

Flame retardant V2 copolymer PP with halogen, 20 % talc loaded, RoHS. For SDS, please contact Addiplast Group using the 'Request Document' button.

Jinyoung (Xiamen) Industrial Toughened PC is Charging Pile Housing Material, High stiffness, Good heat resistance and impact resistance, Flame retardant rating 1.6mm-V0, Low temperature impact toughness, UV exposure, Weather resistance, High design freedom.

Sollamid B 2740 FV 15 features low viscosity Polyamide 6, reinforced with fiberglass and UV protected, intended for injection molding. Sollamid B 2740 FV features formulas with fiber percentages ranging from 10 to 50% in natural, black and custom colors.

BC 8782 produces a high impact rigid 82 Shore D material that is commonly used to make clear or tinted castings of all kinds. When used at room temperature castings 1/8 " thick or larger can readily be cast. Castings that are less than 1/8 " thick generally require a mild post-cure.

GEHR PBT® is a semi-crystalline material from the polyester family of plastics and, due to its good thermal and mechanical properties, is counted among the polymer group of engineering plastics. It has a high surface hardness and good sliding and wear behavior.

RGR20 is a Nylon 66 Glass Reinforced 20%.