Products in Electrical & Electronics: Automotive Applications

VESTAMID® MLT 7440 is an automotive industry-proven 5-layer tube specifically designed for fuel handling systems. This system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. With excellent resistance properties against alcohol-containing fuels, the MLT 7400 offers superior chemical resistance on the inner tube surface and a close-to-zero extraction level. In certain regions, antistatic properties may be required, which are fulfilled by the multilayer tubing system (MLT) 7440. Based on the same design, the MLT 7440 incorporates a conductive fluoropolymer EFEP NEOFLONTM inner layer. Experience the reliability and exceptional performance of the multilayer tubing systems (MLT) 7400 and (MLT) 7440 in fuel handling systems, ensuring superior fuel resistance and meeting the specific requirements of your automotive applications.

VESTAMID® L2140 BK 9.7504 is a heat- and light-stabilized polyamide 12 compound designed for extrusion of tubing and semi-finished products such as fuel lines. The properties of this material are minimally affected by changing humidity due to its low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance.

VESTAMID® L1930 BK 9.7503 is a heat-stabilized PA 12 compound reinforced with 30% milled glass fibers. It is suitable for injection molding applications. The reinforcement provides high strength and rigidity to the moldings. Due to the low water absorption of PA 12, parts made from this compound exhibit good dimensional stability and maintain mechanical properties even with changing ambient humidity.

VESTAMID® X7293 BK 9.7507 is a plasticized polyamide 12 compound formulated with heat and light stabilizers for the extrusion of flexible tubing and hoses, particularly suited for automotive applications. This compound conforms to standards such as DIN 73378 (PA 12-HIPHL, Type 1), ISO/DIN 7628-1 (PA 12-HIPEHL, Type 1), and SAE J844. VESTAMID® X7293 BK 9.7507 offers easy processing and high impact strength at low temperatures. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured from this semicrystalline material, parts exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® X7293 BK 9.7507 is conveniently ready for use. Choose VESTAMID® X7293 BK 9.7507 for its reliability and superior performance in extrusion applications, ensuring excellent results for your automotive tubing and hose needs.

VESTODUR® 3030 is a high-viscosity polybutylene terephthalate (PBT) resin that is specially formulated for extrusion applications. It provides outstanding resistance to hydrolysis and heat. This compound is particularly suitable for the production of rigid, small-diameter tubing, including loose fiber optic buffer tubes. It is also compatible with film extrusion processes.

VESTAKEEP® 4000 GF30 is a glass fiber-reinforced (30%) polyether ether ketone specifically designed for injection molding applications. This semi-crystalline polymer offers superior mechanical, thermal, and chemical resistance, ensuring exceptional performance. Parts manufactured from VESTAKEEP® 4000 GF30 exhibit low flammability, enhancing safety. Compatible with common injection molding machines for thermoplastics, this material simplifies the manufacturing process. Experience the reliability and versatility of VESTAKEEP® 4000 GF30 in your injection molding applications. With its glass fiber reinforcement, it provides enhanced strength and rigidity, while maintaining excellent properties in challenging environments. Choose VESTAKEEP® 4000 GF30 for its superior mechanical performance, thermal stability, chemical resistance, and ease of processing, enabling the production of high-quality injection molded parts.

VESTAKEEP® 2000 G is a medium viscosity, unreinforced polyether ether ketone designed for injection molding applications. This semi-crystalline polymer offers superior thermal and chemical resistance, ensuring high-performance results. Parts manufactured from VESTAKEEP® 2000 G exhibit low flammability, enhancing safety. The material is compatible with common injection molding machines for thermoplastics, simplifying the manufacturing process. For optimal results, we recommend a melt temperature range of 360°C to 380°C during the injection molding process, with a mold temperature within 160°C to 200°C, preferably at 180°C. VESTAKEEP® 2000 G is supplied as granules in 25 kg boxes with moisture-proof polyethylene inliners, ensuring convenient storage and handling. Choose VESTAKEEP® 2000 G for its reliability, ease of processing, and exceptional properties, enabling the production of high-quality injection molded parts.

VESTAMID® MLT 7400 is a proven 5-layer tube designed specifically for fuel handling systems in the automotive industry. This innovative system features an outer layer of VESTAMID® polyamide 12, along with two barrier layers: ethylene vinyl alcohol (EVOH) as the middle layer and a fluoropolymer, EFEP NEOFLONTM, as the inner layer. The combination of these materials provides exceptional resistance to alcohol-containing fuels, superior chemical resistance on the inner tube surface, and virtually zero extraction levels. VESTAMID® MLT 7400 delivers reliable performance and durability. It comes in the form of pellets or granules, allowing for easy integration into manufacturing processes. With its excellent thermal stability and resistance to oil and fuels, this tube finds extensive applications in the automotive and mobility sectors.

VESTAMID® L2123 BK 9.7507 is a plasticized and high-viscosity polyamide 12 compound designed for the extrusion of flexible tubing and hoses, particularly in the automotive industry. This compound complies with DIN 73 378, Type: PA 12-PHL, for tubing. Thanks to its low moisture absorption, compounds based on PA 12 demonstrate minimal variation in properties with changing humidity. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. VESTAMID® L2123 BK 9.7507 features a high melt viscosity, optimized cold temperature impact resistance, and precise dimensional control during pipe extrusion. Supplied as cylindrical granules in moisture-proof bags, they are ready for seamless processing. Choose VESTAMID® L2123 BK 9.7507 for its reliability, high-viscosity performance, and excellent properties in your flexible tubing and hose extrusion applications.

VESTAMID® MLT 7840 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It features high thermal stability, resistance to oil and fuels, and excellent barrier properties. It is resistant to fuel and finds applications in the automotive and mobility sectors.

VESTAMID® X7293 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is known for its easy processing and high impact strength at low temperatures.

TEGO® CYCLE CP 310 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. Its use provides several advantages for specific applications. It reduces gelling, resulting in lower failure rates, reduces pressure, increases throughput, and prevents melt fracture and shark skin effect. It also reduces surface roughness. TEGO® CYCLE CP 310 shortens cycle times, prevents cut propagation in oriented tapes and films, and improves mechanical performance, including notched impact strength and elongation at break. It also prevents stress cracking and whitening.

VESTAMID® MLT 4300 is an established 4-layer tube for automotive fuel handling systems. It is a multilayer tubing system with an outer layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). VESTAMID® MLT 4300 offers excellent permeation resistance against ethanol-containing fuels and good cold impact performance.

VESTAMID® LX9008 BK 9.7504 is a plasticizer-free polyamide 12 compound renowned for its exceptional long-term resistance under thermal load. This compound is specifically designed for the production of flexible tubes exposed to higher temperatures, making it ideal for applications in the engine compartment of motor vehicles. When utilized as diesel fuel lines, VESTAMID® LX9008 BK 9.7504 demonstrates significant advantages over standard grades, as evident in storage tests with diesel fuel. With low moisture absorption, this material maintains the dimensions and properties of finished parts even in changing ambient conditions. However, when using VESTAMID® LX9008 BK 9.7504 for fuel lines, certain prerequisites must be considered. Experience the outstanding long-term thermal resistance and reliability of VESTAMID® LX9008 BK 9.7504 for your demanding applications.

VESTAMID® MLT 8000 is a proven 3-layer system for thermal management systems in the automotive industry. It consists of an outer layer of VESTAMID® polyamide 12 and a special polypropylene inner layer. The product offers high hydrolysis resistance against coolant liquids and urea solutions, good cold impact performance, and significant weight savings compared to less innovative concepts such as metal or rubber hoses.

VESTAMID® X7297 BK 9.7507 is a plasticized polyamide 12 compound with a heat and light stabilizer for the extrusion of flexible tubing and hoses, especially for automotive applications. It is characterized by easy processing and high impact strength at low temperatures.

VESTAMID® MLT 4500 is a well-established 5-layer tube designed for automotive fuel handling systems. This system features an outer and inner layer of VESTAMID® polyamide 12, providing excellent performance and durability. The MLT 4500 series also incorporates a barrier layer of ethylene vinyl alcohol (EVOH), offering superior permeation resistance against alcohol-containing fuels. Additionally, it delivers exceptional cold impact performance, ensuring reliable operation even in challenging conditions. In specific regions where antistatic properties are required, the multilayer tubing system (MLT) 4540 is available. Based on the same design, the MLT 4540 includes a conductive VESTAMID® polyamide 12 inner layer to fulfill the antistatic requirements. Experience the reliability and versatility of the MLT 4500 series and MLT 4540 in automotive fuel handling systems, ensuring efficient fuel transport and meeting the specific needs of your applications.

VESTAKEEP® 5000 P is a high-viscosity polyether ether ketone powder known for its outstanding thermal and chemical resistance. This unreinforced, semi-crystalline polymer offers superior performance in challenging environments. VESTAKEEP® 5000 P exhibits low flammability, ensuring enhanced safety. It is supplied as a powder conveniently packaged in boxes with moisture-proof polyethylene liners. Experience the reliability and versatility of VESTAKEEP® 5000 P for your specific applications. This high-viscosity powder delivers exceptional thermal and chemical resistance, making it suitable for a wide range of industrial uses. Choose VESTAKEEP® 5000 P for its superior properties and ease of handling in your projects.

VESTAMID® LX9001 BK 9.7504 is a heat-stabilized and light-resistant PA 12 compound specifically developed for the extrusion coating of steel tubes. This compound enhances the corrosion resistance of steel tubes through its exceptional impact strength, abrasion resistance, and chemical resistance. The excellent adhesion between the steel and the properly applied VESTAMID® LX9001 BK 9.7504 further contributes to this increased corrosion resistance. Additionally, VESTAMID® LX9001 BK 9.7504 offers the advantages of low water absorption, good dimensional stability, and consistent properties even in changing ambient humidity. Supplied as cylindrical pellets in moisture-proof packaging, they are ready for seamless processing. Experience the exceptional qualities of VESTAMID® LX9001 BK 9.7504 and enhance the performance and durability of steel tubes with its reliable coating solution.

VESTAMID® MLT 8EV is a proven 3-layer system designed for thermal management systems in the automotive industry. It is particularly suited for battery electric vehicles (BEVs), where thermal management of the battery, E-motor, or power electronics is crucial. The VESTAMID® MLT 8EV offers a cost-effective composition for cooling line applications, meeting the specific requirements of BEVs.

VESTAKEEP® 4000 P is an unreinforced, high-viscosity polyether ether ketone powder. It can be used for manufacturing compounds or as a scatter powder for composites. The semicrystalline polymer offers superior thermal and chemical resistance. VESTAKEEP® 4000 P has low flammability.

VESTAMID® L1833 BK 9.7623 is a 23% glass fiber-reinforced, easily demoldable, and heat-stabilized polyamide 12 compound. This compound is specifically formulated to provide efficient production of injection molded parts with short cycle times, thanks to its excellent mold release properties. VESTAMID® L1833 BK 9.7623 is supplied as cylindrical granules, conveniently packaged in moisture-proof bags, ensuring optimal storage conditions. Experience the reliability and performance of VESTAMID® L1833 BK 9.7623 in your injection molding applications. This compound, with its glass fiber reinforcement, offers enhanced strength and rigidity, while its demolding characteristics and heat stability contribute to efficient production. Choose VESTAMID® L1833 BK 9.7623 for its exceptional properties, ease of processing, and suitability for a wide range of injection molded parts.

VESTAMID® MLT 4540 is an established 5-layer tube used in automotive fuel handling systems. It consists of an outer and inner layer of VESTAMID® polyamide 12 and a barrier layer of ethylene vinyl alcohol (EVOH). The VESTAMID® MLT 4540 offers good permeation resistance against alcohol-containing fuels and excellent cold impact performance.

VESTAKEEP® 5000 G is a high-viscosity, unreinforced polyether ether ketone suitable for injection molding and extrusion. It is a semi-crystalline polymer with superior thermal and chemical resistance. Parts made from VESTAKEEP® 5000 G have low flammability and can be processed using standard machines for thermoplastics.

VESTAKEEP® 5000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. This versatile material can be used as a basic resin or in blends with different additives for manufacturing compression molding parts. The semi-crystalline polymer offers superior thermal and chemical resistance, making it suitable for demanding applications. VESTAKEEP® 5000 FP exhibits low flammability, ensuring enhanced safety. It is supplied as a powder in 10 kg boxes with moisture-proof polyethylene liners, providing convenient and reliable storage. Choose VESTAKEEP® 5000 FP for its exceptional properties and versatility in manufacturing compression molding parts. Experience the reliability and performance of this high-viscosity powder in your specific applications.

VESTAMID® LX9112 BK is a heat-stabilized, conductive polyamide 12 compound specifically developed for the pore-free extrusion coating of steel tubing. It stands out from commonly used conductive extrusion compounds due to its significantly lower melt viscosity and outstanding extrusion characteristics, even in very thin coatings.

VESTAMID® L2124 NC is a plasticized, heat- and light-stabilized polyamide 12 compound specially designed for the extrusion of flexible tubing and hoses, particularly for oil and petrochemical applications. This compound conforms to DIN 73 378, Type: PA 12-PHL, for tubing. VESTAMID® L2124 NC is characterized by its high melt viscosity and excellent dimensional control during pipe extrusion. Compounds based on PA12 demonstrate minimal variation in properties with changing humidity due to their low moisture absorption. Parts made from this semi-crystalline material exhibit exceptional impact strength, a low coefficient of friction, and good chemical resistance. Choose VESTAMID® L2124 NC for its reliable performance, versatility, and exceptional properties, ensuring the durability and reliability of your flexible tubing and hose applications.

VESTAMID® L2124 BK 9.7507 is a plasticized polyamide 12 compound specially formulated for the extrusion of flexible tubing and hoses in oil and petrochemical applications. This heat- and light-stabilized compound complies with DIN 73-378, Type: PA 12-PHL, for tubing. Its low moisture absorption ensures minimal variation in properties with changing humidity. Manufactured with exceptional impact strength, a low coefficient of friction, and good chemical resistance, parts made from VESTAMID® L2124 BK 9.7507 exhibit outstanding performance. With its high melt viscosity and precise dimensional control during pipe extrusion, this semi-crystalline material provides reliability and ease of processing. Supplied as cylindrical granules in moisture-proof bags, VESTAMID® L2124 BK 9.7507 is ready for seamless integration into your production process.

TEGO® Cycle CP 320 is an organo-modified siloxane that is used as a processing additive, compatibilizer, and for permanent modification of polymer properties. It is particularly suitable for recycled polymers, as it can be used to compatibilize PE in PP, PP in PE, and PA in polyolefins. TEGO® Cycle CP 320 is ideal for producing automotive parts, electronic appliances, packaging materials, consumer goods, and oriented packaging straps. Its use provides several advantages for specific applications, including improved mechanical performance, better weld line strength, and prevention of stress cracking and whitening. It also improves mold release properties, reduces manual interventions, and allows for more exact reproduction of surface structure, resulting in shorter cycle times.

VESTAKEEP® L 4000 G is a high-viscosity, unreinforced, lubricated polyether ether ketone suitable for injection molding and extrusion. The semicrystalline polymer offers superior thermal and chemical resistance. Parts made from VESTAKEEP® L 4000 G have low flammability and can be processed using standard machines for thermoplastics.

VESTAMID® X7393 BK 9.7507 is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 BK 9.7507 exhibit optimized cold temperature impact resistance, increased burst pressure resistance, a low coefficient of friction, and good chemical resistance.

VESTAMID® LX9013 BK 9.7507 is a plasticized polyamide 12 compound with exceptionally high long-term resistance under thermal load. It has low moisture absorption, resulting in minimal dimensional and property changes under changing ambient conditions. Extruded tubes made from VESTAMID® LX9013 BK 9.7507 are impact-resistant, even at low temperatures. This material is suitable for producing flexible tubes that are consistently exposed to higher temperatures, such as in the engine compartment of motor vehicles.

VESTAMID® MLT 4800 is an innovative 'low extractable' 5-layer tube designed for automotive fuel handling systems. It consists of an outer layer of VESTAMID® polyamide 12, a barrier layer of ethylene vinyl alcohol (EVOH), and an inner layer of VESTAMID® polyamide 612. VESTAMID® MLT 4800 offers excellent barrier properties against ethanol-containing fuels and has very low extractables. It exhibits excellent cold impact properties, like all Evonik multilayer systems.

VESTAMID® X7393 NC is a high-viscosity, plasticized, impact-modified, heat- and light-stabilized polyamide 12 compound used for flexible tubing and hoses in the automobile industry. Parts made from VESTAMID® X7393 NC exhibit optimized cold temperature impact resistance and increased burst pressure resistance in the extrusion of semi-rigid tubing. Additionally, it offers an exceptional low coefficient of friction and good chemical resistance.

VESTAKEEP® 4000 FP is an unreinforced, high-viscosity polyether ether ketone fine powder. It can be used as a basic resin or blended with different additives for manufacturing compression molding parts. This semi-crystalline polymer exhibits excellent thermal and chemical resistance. VESTAKEEP® 4000 FP has low flammability.

LNP™ VERTON™ Compound MV00ASXP utilizes polypropylene (PP) resin reinforced with 50% long glass fibers, ensuring exceptional structural integrity and stiffness. This compound is chemically coupled to enhance performance, heat stabilized for reliable operation in varying temperatures, and designed with a focus on structural applications. Ideal for automotive exteriors, water management systems, sport and leisure equipment, home appliances, and commercial appliances, LNP™ VERTON™ Compound MV00ASXP offers high stiffness and strength without the use of intentionally added PFAS. It excels in injection molding processes, providing robust solutions for industrial applications requiring durability and dimensional stability.