Products in Advanced Materials: Glass Beads & Fibers

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

Microglass milled fibers are E-glass filaments. Microglass is used as reinforcement in composites to increase mechanical properties (impact, tensile, compressive and flexural), improve dimensional stability and minimize distortion at elevated temperatures.

E-T 0900 is a E-Glass fiber type.

E-T 1200 is a E-Glass fiber type.

E-QX 4800 is a E-Glass fiber type.

E-3LTI 10800 is a E-Glass fiber type.

TG-24-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

TG-11-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

The 781 braid is a tubular glass reinforcement with optimized 45° angles, total weight of 180 g/m and diameter of 85 mm. It is used in particular in the shipbuilding industry.

UNDIRECTIONAL FABRIC 1848 is a unidirectional fabric.

E-T 1600 is a E-Glass fiber type.

702 Direct Roving and Assembled Roving is coated with a silane-based sizing. Specially designed for texturizing and weaving of wet processes , it is suitable for use in texturized roving, texturized fiberglass loomstate, fiberglass tape, fiberglass rope and mesh, etc. It is widely used in smelting, power generation, shipbuilding, automobile, oil field filtration and other sealing insulation materials and construction, transportation, chemical, environmental protection, national defense and other thermal insulation materials.

E-LT 2900 is a E-Glass fiber type.

E-2LTI 7200 is a E-Glass fiber type.

E-LT 3200 is a E-Glass fiber type.

E-LT 3600 is a E-Glass fiber type.

E-LT 1800 is a E-Glass fiber type.

The 776 braid is a tubular glass reinforcement with optimized 45° angles, total weight of 233 g/m and diameter of 96 mm. It is used in particular in the shipbuilding industry.

C-TAPE™ U300P 12K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 310 gsm. It is made using 12K HS carbon fiber. The binding provided by the weft, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

TG-10-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

Hesgon Company Polyester-Glass Heat Shrink Tape 56-36PG is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

E-LT 1200-P is a E-Glass fiber type.

TG-07-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

TG-10-T is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

E-QX 2600 is a E-Glass fiber type.

E-QX 9000 is a E-Glass fiber type.

E-QX 5600 is a E-Glass fiber type.

C-TAPE™ U300P 12K HS* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 318 gsm. It is made using 12K HS carbon fiber. This carbon tape is used primarily for local reinforcement with epoxy resin. *FOE fiber available upon request

Hesgon Company Polyester-Glass Heat Shrink Tape 48-72PG is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.

C-TAPE™ U1000P 24K HS FT* is a unidirectional carbon fiber tape with a continuous weft, with a total weight of 1006 gsm. It is made using 24K HS carbon fiber. The binding provided by the weft, along with the addition of fine warp threads, ensures the regularity of the product’s appearance; This carbon tape is used primarily for local reinforcement with epoxy resin. * FOE fiber available upon request

US-16-P is a E-Glass Fiber (Originally known as Electical glass). The most economical and commonly used fiber in the reinforced polymer composite industry with variety of sizes (finish) depending on the resin system process application.

E-LT 1800-P is a E-Glass fiber type.

362C Direct Roving is specifically designed for continuous fiber-glass reinforced thermoplastic (CFRT) application in modified PP/PE resin. CFRT materials are widely used in automotive, construction, sports, electric and electronic applications.

Hesgon Company Polyester-Glass Heat Shrink Tape 58-36PG is selvage edge tape that is constructed with polyester yarn in the warp direction and fiberglass yarn in the filling direction. Shrinkage will occur in the longitudinal direction in order to have a very tight wrap. Sharp corners and curves can be wound without the tape buckling or puckering and the correct overlap can be maintained since the tape will not shrink in the transverse direction.