Products in Rail & Mass Transit Coatings

Resicure® D-5 is a pulverized grade of dicyamdiamide with an average particle size of about 5 micron. The products contains fumed silica to prevent clumping and improve flow. Typically the product is used with epoxy resin between 3-8 phr. Technicure® D-5 reacts with epoxy resin at temperatures higher than 170°C unless an accelerator is used. Suggested accelerators include Technicure® LC-80, Technicure® LC-100 and substituted ureas such as Technicure® MDU-11M, Technicure® PDU-250M and Technicure® TDU-200M. The type and loading level of an accelerator will provide excellent balance of low temperature reactivity and formulation shelf stability.

VOXCO PIGMENT YELLOW 17 GG is suitable for use in Powder Coating

Razeen® SR 5174 is a solid, Bisphenol A epoxy resin modified with 5% flow modifier.

Kraton D1119 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 22%. It is supplied from North America in the physical form identified below. Kraton D1119 PT - supplied as a dusted dense pellet Kraton D1119 PSM - supplied as a powder dusted with silica Kraton D1119 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

Razeen® SR 5013 is a solid, unmodified Bisphenol A epoxy resin.

Technicure® D-10 is a pulverized grade of dicyandiamide with an average particle size of about 10 micron. The products contains fumed silica to prevent clumping and improve flow. Typically the product is used with epoxy resin between 3-8 phr. Technicure® D-10 reacts with epoxy resin at temperatures higher than 170°C unless an accelerator is used. Suggested accelerators include Technicure® LC-80, Technicure® LC-100 and substituted urea such as Technicure® MDU-11M, Technicure® PDU-250M and Technicure® TDU-200M. The type and loading level of an accelerator will provide excellent balance of low temperature reactivity and formulation shelf stability. Technicure® D-10 is available without fumed silica or with a different flow control agent.

CHS-EPOXY 160 is a Low molecular weight "2 - type" epoxy resin.

Leveling agent for powder coatings Lu'An Jietonda New Material K7572 is a white powder based on an acrylate polymer active ingredient. It is used in powder coatings to significantly improve the melt flow of the system and has excellent leveling properties.

LX®-3100 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

Kraton D4150 K is a linear triblock copolymer based on styrene and butadiene with a polystyrene content of 31%. It is supplied from North America in the physical form identified below. Kraton D4150 KT - supplied as a dusted porous pellet Kraton D4150 KU - supplied as an undusted porous pellet Kraton D4150 K is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications, molded and extruded goods applications and may be used in formulating adhesives, sealants, and coatings.

At 100% active with a well-balanced surface-active capability, Teraflow® 1000 provides smoother films, allowing the application of thinner coatings, and contributes to substrate wetting, improvement of gloss, and recoat adhesion. Its novel pigment-affinic functionality, allows the formulator to optimize the dispersion of almost all pigments and extenders. It is soluble in ketones such as MEK and MIBK.

T Comet Blue 60 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Genesee Polymers’GP-690 ABA SILICONE POLYOL COPOLYMER is a 100% active non-ionic silicone polyol block copolymer with the following structure: P-690 contains polyoxyethylene blocks and dimethyl silicone polymer blocks, which are joined through non-hydrolyzable silicon to carbon bonds.GP-690 ABA SILICONE POLYOL COPOLYMER is designed to function as an emulsifier, wetting agent and profoaming additive for a variety of applications including: polyurethane foams, hard surface cleaners and polishes, and cosmetic formulations.GP-690 contains a primary hydroxyl group at each end of the molecule, allowing for reaction with isocyanates in polyurethane resin systems. This is expected to improve flow and leveling of polyurethane coatings and impart non-stick characteristics to the cured coatings.In textile applications, GP-690 is suggested as a fiber lubricant where more thermal stability is needed than is provided by organic lubricants such as stearates or mineral oils.GP-690is soluble in lower alcohols (EtOH, IPA) and dispersible in water, along with aliphatic and aromatic hydrocarbons.

Razeen® SR 5334 is a high flow, solid, epoxy resin based on bisphenol A containing 2.5% flow agent.

Reacrone PCL-850 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

A daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

INNORES® 24-Alkyd colorants for general industrial alkyd and polyester system

Anionic wetting and dispersing additive to prevent settling and flooding of pigments

Razeen® SR 5014 is a solid, unmodified epoxy resin based on Bisphenol A.

Kraton DX1000 A is a clear, diblock copolymer based on styrene and butadiene with bound styrene of 9% mass. It is supplied from Europe in the physical form(s) identified below. Kraton DX1000 AU - supplied as an undusted porous pellet Kraton DX1000 A is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

T Flame Orange 4 is a daylight fluorescent pigment for inks, paints, aerosols, plastisols and organosol coatings.

Antioxidants - Others

Reacrone PCL-100 is based on a liquid acrylic polymer that has been converted into free-flowing powder by adsorption onto fumed silica.

Lu'An Jietonda New Material SA300 is a Glycidyl functional acrylic resin for powder coatings.Jietonda® SA300 is a glycidyl containing-solid acrylic resin capable reactive with carboxyl or amine compound, which is designed to be used in combination with other curing agents to provide powder coatings with higher crosslink density, improved mechanical properties, heat and chemical resistance.

CHS-EPOXY 112 is a Medium molecular weight "4 - type" epoxy resin.

VOXCO PIGMENT ORANGE 34 GR is suitable for use in Alkyd / Stoving, Water Based, Powder Coating

Leveling agent for powder coatings Lu'An Jietonda New Material K7567 is a white powder based on an acrylate polymer active ingredient. It has good leveling properties for powder coatings.

Kraton D1162 P is a clear, linear triblock copolymer based on styrene and isoprene with a polystyrene content of 43%. It is supplied from North America in the physical form identified below. Kraton D1162 PT - supplied as a dusted dense pellet Kraton D1162 P is used as an ingredient in formulating adhesives, sealants and coatings. It may also find use as a modifier of bitumen or thermoplastics and in compound formulations.

An ultra high-strength daylight fluorescent pigment for thinfilm solvent-based applications such as gravure and screen process inks. A dyed/pigmented melamine, sulphonamide, formaldehyde thermoset copolymer.

SILLITIN N 85 puriss has a coarse particle size distribution and yellowish tinge.

LX®-2600 is a thermoplastic low molecular weight, hydrocarbon resin produced by thermal polymerization of mixed DCPD, aromatic and alicyclic monomers derived from petroleum feedstocks.

VOXCO PIGMENT YELLOW 168 GP is suitable for use in Alkyd / Stoving, Water Based, Powder Coating