Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Specialty Elastomers
Products in Specialty Elastomers
1,645 Products found in Specialty Elastomers
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
Processing Methods
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
ELASTOSIL® R Plus 4020/60 MH
Polymer Name:
Silicone Elastomer
Features:
Excellent Transparency Properties, Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency
Tear Strength:
48.0 - 48.0 kN/m
ELASTOSIL® R Plus 4020/60 MH is a one-component, high consistency silicone rubber specifically formulated for the manufacture of molded articles. The cured articles are known for their high transparency and excellent tear resistance. This fast-curing silicone rubber also exhibits remarkable tear resistance properties. The addition cure process enables a significantly faster vulcanization reaction compared to peroxide curing materials.
Wacker Chemie AG
ELASTOSIL® LR 3856/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Cut Through Resistant, Enhanced Tear Resistant, Low Compression Set, Heat Stabilized, Low Volatility, Good Mold Release, Fast Curing
Tear Strength:
22.0 - 22.0 kN/m
ELASTOSIL® LR 3856/30 A/B is a high-oil-bleeding liquid silicone rubber of the ELASTOSIL® LR 3856 series. It is a paste-like, easily pigmentable, two-component product with short curing times and very good demoldability (high hot tear resistance). Shortly after curing, a thin oil film with lubricating properties forms on the surface. The vulcanizates are opaque, have very good mechanical and electrical properties, excellent cut resistance, and a low compression set without post-cure.
Wacker Chemie AG
ELASTOSIL® R Plus 4066/60 MH
Polymer Name:
Silicone Elastomer
Features:
Excellent Transparency Properties, Heat Stabilized, Food Contact Acceptable, Low Coefficient of Friction, Good Mechanical Properties, High Consistency
Tear Strength:
40.0 - 40.0 kN/m
ELASTOSIL® R Plus 4066/60 MH is a high consistency silicone rubber designed for the production of molded articles through addition curing. The cured articles display a low coefficient of friction. In comparison to standard high consistency silicone rubber (HCR) grades such as ELASTOSIL® 4001/60, post-cured parts made from ELASTOSIL® R Plus 4066/60 MH exhibit a reduction in coefficient of friction ranging from 50% to 70%.
Wacker Chemie AG
ELASTOSIL® LR 3072/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Cables, Batteries
Features:
High Bleed Resistant, Fast Curing, Good Mechanical Properties, Pigmentable, Excellent Lubricity, Cost Effective, Good Electrical Properties
Tear Strength:
23.0 - 23.0 kN/m
ELASTOSIL® LR 3072/50 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3072 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.
Wacker Chemie AG
SILPURAN® 6000/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Medical/Healthcare Applications, Gaskets, Valves, Medical Devices, Connectors
Features:
Fast Curing, Excellent Surface Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Good Mechanical Properties, Excellent Mechanical Strength, Food Contact Acceptable, Low Volatility
Tear Strength:
30.0 - 30.0 kN/m
SILPURAN® 6000/50 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6000/50 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/40
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency, Low Compression Set, Excellent Transparency Properties
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® R Plus 4305/40 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
POWERSIL® 732 CS A/B
Processing Methods:
Injection Molding
End Uses:
Cables, Cable Accessories, Wires
Features:
Tracking Resistant, Pigmentable, Good Weather Stability, Cold Shrinkable, Good Electrical Properties, Outdoor Durability, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Good Processability, UV Resistant, Excellent Dielectric Properties, Easier Processing
Tear Strength:
35.0 - 35.0 kN/m
POWERSIL® 732 CS A/B is a two-component, liquid silicone rubber that offers excellent processing properties. The resulting vulcanizates exhibit exceptional mechanical and electrical properties. This product is specifically designed for cold-shrink applications and provides excellent dielectric properties. It is highly suitable for outdoor applications, offering UV and weathering resistance as well as excellent hydrophobic properties.
Wacker Chemie AG
ELASTOSIL® R Plus 4305/30
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Heat Stabilized, Food Contact Acceptable, Fast Curing, Good Mechanical Properties, High Consistency, Low Compression Set, Excellent Transparency Properties
Tear Strength:
43.0 - 43.0 kN/m
ELASTOSIL® R Plus 4305/30 is a two-component, high-consistency silicone rubber designed for the manufacture of extruded articles. Cured articles made from this addition-curing rubber exhibit excellent transparency and good to very good mechanical properties. This fast-curing silicone rubber demonstrates good to very good mechanical properties. The vulcanization reaction is significantly faster compared to peroxide-curing materials, thanks to the addition cure process. Additionally, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® LR 3004/30 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Heat Stabilized, Food Contact Acceptable
Tear Strength:
24.0 - 24.0 kN/m
ELASTOSIL® LR 3004/30 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3004 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3846/20 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Heat Stabilized
Tear Strength:
16.0 - 16.0 kN/m
ELASTOSIL® LR 3846/20 A/B is a considerable oil-bleeding, liquid silicone rubber of the ELASTOSIL® LR 3846 series. It is a paste-like, readily pigmentable, two-component product with a short curing time. Shortly after the curing process, a slight, thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque, have good mechanical and electrical properties, and have very low compression sets.
Wacker Chemie AG
SILMIX® M70 White
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
29.75 - 29.75 kN/m
SILMIX® M70 White is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are recognized for their good flexibility and mechanical properties. SILMIX® M70 White is designed for fabricating molded articles. Moreover, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3092/65 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Automobile Door Seals, Gaskets
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Very Good Heat Resistance, Low Compression Set, Low VOC, Cost Effective, Heat Resistance, Heat Stabilized
Tear Strength:
25.0 - 25.0 kN/m
ELASTOSIL® LR 3092/65 A/B is a paste-like, two-component liquid silicone rubber with short curing times. The vulcanizates are noted for good mechanical properties and excellent heat resistance within a temperature range of -55°C to +210°C, and for a short time up to 300°C. Low compression sets can be achieved after post-curing.
Wacker Chemie AG
ELASTOSIL® LR 3011/50 FR A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding, Liquid Injection Molding
End Uses:
Automobile Door Seals
Features:
Low Volatility, Fast Curing, Low Flammability, Flame Retardant, Low Compression Set, Low VOC, Cost Effective, Heat Resistance
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3011/50 FR A/B is a liquid silicone rubber. It is a paste-like, low-inflammable, two-component compound. The excellent flame retardancy is confirmed by UL94-V0 listings at 0.75 mm and 3 mm thickness. Good heat resistance, low compression set, short curing times, and non-abrasive behavior in the LIM process are further benefits of this material.
Wacker Chemie AG
SILMIX® E40 Gray
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
SILMIX® E40 Gray is a compound used for fabricating vulcanizates that display a distinct combination of characteristics. These vulcanizates are well-regarded for their favorable flexibility and mechanical properties. SILMIX® E40 Gray is specifically formulated for the production of extruded articles. Furthermore, post cured parts made from this compound can be safely utilized in food contact applications and are deemed suitable for use under the recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 5040/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Baby Teats, Medical/Healthcare Applications, Bathroom Accessories, Medical Devices
Features:
Low Volatility, Fast Curing, Excellent Productivity, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Food Contact Acceptable
Tear Strength:
13.0 - 13.0 kN/m
ELASTOSIL® LR 5040/50 A/B is a paste-like, easily pigmentable, two-component liquid silicone rubber with very low volatile content and excellent mechanical properties with no required postcure. Articles made from ELASTOSIL® LR 5040/50 A/B exhibit high transparency, excellent electrical properties, and mechanical properties engineered for high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent) without post-curing. The ability to meet regulatory requirements for specific food and baby care applications without the need for post-curing offers key advantages in cost savings and productivity.
Wacker Chemie AG
POWERSIL® 735 Light Gray A/B
Processing Methods:
Injection Molding
End Uses:
Cable Accessories, Insulators, Wires, Cables
Features:
Outdoor Durability, Electrically Insulating, Good Erosion Resistance, Good Mechanical Properties, Excellent Hydrophobic Properties, Good Processability, UV Resistant, Excellent Dielectric Properties, Good Tear Strength, Low Viscosity, Tracking Resistant, Good Weather Stability
Tear Strength:
30.0 - 30.0 kN/m
POWERSIL® 735 Light Gray A/B is a two-component compound with low viscosity, offering excellent processing properties. The resulting vulcanizates exhibit remarkable resistance to tracking and erosion, along with favorable mechanical properties such as high tear strength. Additionally, they demonstrate excellent dielectric behavior, making it a reliable choice for various applications.
Wacker Chemie AG
SILPURAN® 6400/40 A/B
End Uses:
Medical/Healthcare Applications, Gaskets, Medical Devices
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Good Electrical Properties, Tear Resistance, Food Contact Acceptable, Low Volatility, Fast Curing, Excellent Surface Properties, Good Mechanical Properties
Tear Strength:
15.0 - 15.0 kN/m
SILPURAN® 6400/40 A/B is a paste-like, easily pigmentable two-component compound with short curing times. Its vulcanizates are noted for their high transparency and excellent mechanical and electrical properties. SILPURAN® 6400 exhibits excellent tear resistance measured according to ASTM D 624 B and DIN ISO 34-1 method A (DIN 53507). SILPURAN® 6400/40 A/B is designed for medical applications in compliance with the Wacker Silicones Health Care Policy, including implantation for less than 30 days.
Wacker Chemie AG
ELASTOSIL® LR 3074/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Radiator, Automobile Door Seals
Features:
Cost Effective, Good Electrical Properties, Coolant Resistant, Fast Curing, Good Mechanical Properties, Pigmentable
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® LR 3074/60 A/B is a self-adhesive liquid silicone rubber of the ELASTOSIL® LR 3074 series. It is a paste-like, easily pigmentable, two-component compound with an extremely short curing time. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and have good mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® LR 3066/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Bathroom Accessories
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® LR 3066/60 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3066 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. When compared to the ELASTOSIL® LR 3003 grade, the coefficient of friction is reduced by 50-70%. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties.
Wacker Chemie AG
ELASTOSIL® R 757/60
Polymer Name:
Silicone Elastomer
End Uses:
Safety Cables, Appliance Wire Insulation
Features:
Low Compression Set, Hot Air Resistant, Tear Resistance, Good Thermal Stability, High Elasticity, Good Mechanical Properties, High Consistency
Tear Strength:
27.0 - 27.0 kN/m
ELASTOSIL® R 757/60 is a high-consistency silicone rubber (HCR) known for its exceptional resistance to hot air, especially when a heat stabilizer is added. The material exhibits excellent tear resistance, a low compression set, and high elasticity. It is suitable for use in appliance cables that comply with UL 758 and have a temperature rating of 250 oC.
Wacker Chemie AG
ELASTOSIL® RT 402
Polymer Name:
Silicone Elastomer
End Uses:
Computer Components, Toys
Features:
Static-Dissipative, Soft, Good Flow, Tear Resistance, Room Temperature Vulcanizing, Good Mechanical Properties, Anti-Static, Low Hardness, Good Tear Strength, Self Deaeration, Fast Curing, Excellent Flowability, Pourable
Tear Strength:
3.0 - 3.0 kN/m
ELASTOSIL® RT 402 is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature. It is characterized by its antistatic properties, condensation-curing mechanism, and flowability. This silicone rubber is commonly used in applications such as elastomers for pad printing, where its unique properties are beneficial.
Wacker Chemie AG
ELASTOSIL® LR 3016/65 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Gaskets
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low Compression Set, Low VOC, Oil Resistant, Cost Effective
Tear Strength:
26.0 - 26.0 kN/m
ELASTOSIL® LR 3016/65 A/B is a liquid silicone rubber. It is a paste-like, readily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high oil resistance. It is off-white and has moderate mechanical properties. Thanks to the excellent compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® R Plus 5305/70
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Battery Cable, Ignition Cables
Features:
Heat Stabilized, Platinum Catalyzed, Fast Curing, Good Mechanical Properties, High Consistency, Excellent Transparency Properties
Tear Strength:
42.0 - 42.0 kN/m
ELASTOSIL® R Plus 5305/70 is a platinum-catalyzed, addition-curing, two-part silicone rubber specifically designed for the manufacturing of extruded articles. Cured articles exhibit excellent transparency and very good mechanical properties. This silicone rubber is suitable for applications such as ignition and battery cables, utilizing addition curing and two-component systems.
Wacker Chemie AG
ELASTOSIL® R Plus 4350/55
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
End Uses:
Household Goods
Features:
Heat Resistance, Heat Stabilized, Food Contact Acceptable, Good Thermal Stability, Fast Curing, High Resilience, Good Mechanical Properties, High Consistency
Tear Strength:
18.0 - 18.0 kN/m
ELASTOSIL® R Plus 4350/55 is a two-component high consistency silicone rubber designed for the manufacture of extruded articles. It utilizes an addition-curing system and offers excellent heat stability. This product is suitable for various applications including household applications, where it can be used for addition curing, food-contact, heat resistance, and high rebound resilience.
Wacker Chemie AG
ELASTOSIL® R Plus 4000/70
Polymer Name:
Silicone Elastomer
End Uses:
Diving Masks
Features:
Tear Resistance, Heat Stabilized, Food Contact Acceptable, Fast Curing, High Consistency, Excellent Transparency Properties
Tear Strength:
54.0 - 54.0 kN/m
ELASTOSIL® R Plus 4000/70 is a two-component, high consistency silicone rubber specifically formulated for the production of molded articles. When cured, these articles demonstrate both high transparency and exceptional tear resistance. This fast-curing silicone rubber exhibits impressive elongation values and maintains excellent tear resistance. Thanks to the addition cure process, the vulcanization reaction occurs significantly faster compared to peroxide curing materials. Importantly, no peroxide decomposition products are formed during vulcanization.
Wacker Chemie AG
ELASTOSIL® LR 3040/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Household Goods, Automobile Door Seals
Features:
Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Electrical Properties, Tear Resistance, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable, Low Volatility, Fast Curing
Tear Strength:
11.0 - 11.0 kN/m
ELASTOSIL® LR 3040/50 A/B is a liquid silicone rubber from the ELASTOSIL® LR 3040 series. It is a paste-like, easily pigmentable, two-component compound with a very short curing time. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. They are particularly noted for their high tear resistance according to DIN ISO 34-1 A (trousers) and ASTM D 624 B (crescent).
Wacker Chemie AG
SILMIX® E40 Black
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
Tear Strength:
23.625 - 23.625 kN/m
SILMIX® E40 Black is a compound used for fabricating vulcanizates with a distinctive set of characteristics. These vulcanizates are recognized for their excellent flexibility and mechanical properties. Specifically designed for the production of extruded articles, SILMIX® E40 Black enables the manufacturing of high-quality parts. Additionally, when post-cured, these parts can be safely employed in food contact applications, adhering to the recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3022/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Radiator Seals, Automobile Door Seals, Gaskets
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low Compression Set, Low VOC, Cost Effective, Coolant Resistant
Tear Strength:
14.0 - 14.0 kN/m
ELASTOSIL® LR 3022/60 A/B is a liquid silicone rubber. It is a paste-like, easily pigmentable, two-component compound with short curing times and excellent coolant resistance. The vulcanizates of this product are opaque with average mechanical properties. However, they are highly recognized for their ultra-low compression sets after post-curing.
Wacker Chemie AG
ELASTOSIL® LR 3065/50 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Batteries
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Low Coefficient of Friction, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
31.0 - 31.0 kN/m
ELASTOSIL® LR 3065/50 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3065 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time and a low coefficient of friction. In comparison with ELASTOSIL® LR 3003 grades, the coefficient of friction is reduced by 50-70%. The vulcanizates are noted for their excellent mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
Wacker Chemie AG
ELASTOSIL® RT 728 A/B
Polymer Name:
Silicone Elastomer
End Uses:
Mold Making, Gaskets
Features:
Low Compression Set, High Flexibility, Room Temperature Vulcanizing, Coolant Resistant, Fast Curing, Freeze Resistant, Good Adhesion
Tear Strength:
10.0 - 10.0 kN/m
ELASTOSIL® RT 728 A/B is a two-part paste-like silicone rubber that can be thermally cured. When vulcanized, it exhibits excellent resistance to coolants and has a low compression set. This product is commonly used in applications such as bonding and sealing, as well as in the production of cured-in-place gaskets (dry type). Its notable properties include strong adhesion on synthetic materials that are resistant to antifreeze-water mixtures, as well as a low compression set.
Wacker Chemie AG
ELASTOSIL® LR 3023/60 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Radiator Seals, Automobile Door Seals, Gaskets
Features:
Low Volatility, Fast Curing, Good Mechanical Properties, Pigmentable, Low Compression Set, Low VOC, Cost Effective, Coolant Resistant
Tear Strength:
15.0 - 15.0 kN/m
ELASTOSIL® LR 3023/60 A/B is a liquid silicone rubber. It is a paste-like, easily pigmentable, two-component compound with short curing times and excellent coolant resistance. Vulcanizates are opaque with average mechanical properties, and they are noted for ultra-low compression sets after post-curing.
Wacker Chemie AG
ELASTOSIL® LR 3842/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
End Uses:
Cables, Automobile Door Seals, Automotive Connector Seals, Batteries
Features:
Fast Curing, Pigmentable, Low VOC, Excellent Lubricity, Cost Effective, Excellent Opacity, Good Electrical Properties, High Bleed Resistant, Good Mechanical Properties, Low Compression Set, Oil Resistant, Heat Stabilized, Low Volatility
Tear Strength:
28.0 - 28.0 kN/m
ELASTOSIL® LR 3842/70 A/B is a low-oil-bleeding liquid silicone rubber from the ELASTOSIL® LR 3842 series. It is a paste-like, easily pigmentable, two-component product with short curing times. Shortly after the curing process, a thin oil film with lubricating properties forms on the surface of the vulcanizates. The vulcanizates are opaque and exhibit good mechanical and electrical properties, as well as very low compression sets.
Wacker Chemie AG
POWERSIL® 3500 MH
Polymer Name:
Silicone Elastomer
Processing Methods:
Injection Molding
End Uses:
Arresters, Cable Accessories, Insulators, Wires, Power Transformers, Cables
Features:
High Impact Resistance, Good Erosion Resistance, Good Mechanical Properties, Shock Resistant, Excellent Dielectric Properties, Light Weight, Fast Curing, Good Moldability, High Consistency, Tracking Resistant, Long Term Protection
Tear Strength:
30.0 - 30.0 kN/m
POWERSIL® 3500 MH is a high-temperature vulcanizing (HTV) silicone rubber, used as an addition-curing one-component compound for the production of press-cured articles. The resulting vulcanized products are resistant to tracking and display good to very good mechanical properties. The compound does not release any peroxide split products during cure or post-cure processes. The curing system is significantly faster compared to peroxide-curing materials; cure time can be reduced by 30-50%, depending on the wall thickness.
Wacker Chemie AG
SILMIX® M70 Gray
Polymer Name:
Silicone Elastomer
Processing Methods:
Extrusion
Features:
Good Mechanical Properties, High Consistency, Good Flexibility
SILMIX® M70 Gray is a compound used for fabricating vulcanizates that display a unique combination of characteristics. They are noted for their good flexibility and mechanical properties. SILMIX® M70 Gray is designed for fabricating molded articles. Additionally, post-cured parts made from this compound can be used for food contact applications and are suitable for use under recommendation "XV."
Wacker Chemie AG
ELASTOSIL® LR 3003/30 R A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Appliances, Cables, Garden Equipment, Gaskets, Automobile Door Seals, Lawn Equipment, Connectors
Features:
Low Volatility, Fast Curing, Pigmentable, Low VOC, Excellent Transparency Properties, Cost Effective, Good Mechanical Properties, Heat Stabilized, Food Contact Acceptable
Tear Strength:
20.0 - 20.0 kN/m
ELASTOSIL® LR 3003/30 R A/B is a liquid silicone rubber of the ELASTOSIL® LR 3003 series. It is a paste-like, easily pigmentable, two-component compound with a short curing time. Its vulcanizates are noted for their high transparency and excellent mechanical properties.
Wacker Chemie AG
ELASTOSIL® LR 3005/70 A/B
Polymer Name:
Liquid Silicone Rubber (LSR)
Processing Methods:
Injection Molding
End Uses:
Automobile Door Seals, Vibration Dampers, Batteries
Features:
Pigmentable, Low VOC, Cost Effective, Good Electrical Properties, Good Mechanical Properties, Low Compression Set, Heat Stabilized, Low Volatility, Fast Curing
Tear Strength:
26.0 - 26.0 kN/m
ELASTOSIL® LR 3005/70 A/B is a liquid silicone rubber of the ELASTOSIL® LR 3005 series. It is a paste-like, easily pigmentable, two-component compound with short curing times. The vulcanizates of this product are renowned for their high transparency as well as their exceptional mechanical and electrical properties. Due to the excellent compression set, there is no need to post-cure technical parts.
Show
36
of 1,645 results
Go to page
1
2
3
4
5
6
7
8
9
10