Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Special Features
Good heat stability
Applications & Uses
- Markets
- Applications
- Plastics & Elastomers End Uses
- Application Details
Processing
Vulcanizates that have not been post-cured can be used in numerous applications as post-curing has only little effect on mechanical properties. To obtain optimum compression set values it is advisable to post cure for 4 h at 200 °C.
- Applications
Safety Cables
Properties
- Heat Resistance Properties
- Cured Properties
- Properties
- Good Mechanical Properties
- Good Rheological Properties
- Outstanding Heat Stability
- Note
- Cured properties are cured at 15 min,165 °C after adding 0.7% of EL AUX Crosslinker C1; Post-Cured 4 h/200 °C.
- Heat Resistane Conditions: With 1.5% of EL AUX Stabilizer H3.
| Value | Units | Test Method / Conditions | |
| Elongation (at break, After heat aging 60 days, 260°C) | 200 | % | DIN 53404 S1 |
| Shore Hardness A (After heat aging 60 days, 260 °C) | 71 | — | DIN 53505 |
| Tensile Strength (After heat aging 60 days, at 260°C) | 6.9 | MPa | — |
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | 400 | % | DIN 53404 S1 |
| Rebound Resilience | 60 | % | DIN 53512 |
| Shore Hardness A | 57 - 67 | — | DIN 53505 |
| Specific Gravity | 1.16 | g/cm³ | — |
| Specific Gravity (at 20°C) | 1.16 | g/cm³ | — |
| Tear Strength | min. 27 | N/mm | ASTM D 624 B |
| Tensile Strength | 6.9 | mPa | — |
| Tensile Strength | 8.5 | mPa | DIN 53404 S1 |
| Tensile Strength | 8.5 | mPa | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability