Knowde Enhanced TDS
Identification & Functionality
- Carrier
- Chemical Family
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Specific Features
Resistant to tracking and erosion.
Applications & Uses
- Markets
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
- Applications
- Cable Accessories
- Insulators
- Outdoor and indoor use
- Processing
Components A and B are delivered ready to use in drums of 20 and 200 liters capacity. They can be pumped by means of standard metering equipment from these drums and mixing in a static mixer straight into the heated mold. The mixing ratio is 1 : 1. The material fits very well all requirements for manufacturing of large articles with special dosing and metering equipment because of its low viscosity. At room temperature, mixture of A and B components have a pot life of at least three days.
Properties
- Color
- Catalyst Properties
- Cured Properties
- Uncured Properties
- Properties
- Ready-to-use, two-component system
- Excellent dielectric properties
- Excellent mechanical properties, especially a high tear strength
- Excellent processing due to its low viscosity, also with suitable mixing and dosing equipment only
- Best suitable for outdoor applications (UV & weathering resistance, excellent hydrophobic properties)
- Note
Cure conditions: 5 min / 165°C and post-cured for 4 h at 200°C.
Value | Units | Test Method / Conditions | |
Dynamic Viscosity (Shear rate 10 s⁻¹) | 150000 | mPa·s | DIN EN ISO 3219 |
Kick-Off Temperature (A+B) | 115 | °C | — |
Pot Life (A+B, at 23°C) | 3 | days | — |
Value | Units | Test Method / Conditions | |
Arc Resistance | min. 300 | seconds | IEC 61621 |
Density | 1.08 | g/cm³ | DIN EN ISO 1183-1 A |
Dielectric Strength (1mm sheet) | 28 | kV/mm | IEC 60243-1 |
Dissipation Factor (tan δ, at 50Hz) | 3 x 10⁻³ | — | IEC 62631-2-1 |
Elongation (at break) | 500 | % | ISO 37 Type 1 |
Flammability | FV-0 | — | IEC 60695-11-10 |
Permittivity (at 50Hz) | 2.7 | — | IEC 62631-2-1 |
Shore Hardness A | 39 | — | DIN ISO 48-4 |
Tear Strength | 30 | N/mm | ASTM D 624 B |
Tensile Strength | 8 | N/mm² | ISO 37 Type 1 |
Tracking Resistance | 1A 4.5 | — | IEC 60587 |
Volume Resistivity | 5 x 10¹⁵ | Ohm-cm | IEC 62631-3-1 |
Value | Units | Test Method / Conditions | |
Dynamic Viscosity (Component A, Shear rate 10 s⁻¹) | 150000 | mPa·s | DIN EN ISO 3219 |
Dynamic Viscosity (Component B, Shear rate 10 s⁻¹) | 150000 | mPa·s | DIN EN ISO 3219 |
Mix Ratio (A:B) | 1:1 | parts by weight | — |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability