Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Materials Features
- Specific Features
- Coolant resistant
- Reduced volatile content
- Low compression set without post-cure
Applications & Uses
- Applications
- Plastics & Elastomers End Uses
- Applications
- General Automotive Parts
- Molded Parts
- Molded Seals (Automotive)
- Application Details
ELASTOSIL® LR 3023/60 is particularly suitable for the economical production of radiator gaskets in the automotive industry.
Processing
The A and B components are delivered ready to use in 20 kg pail and 200 kg drum kits. With adequate metering equipment, they can be pumped directly from the original containers into the injection molding machine and mixed by a static mixer. The mixing ratio is 1 : 1. At room temperature, mixtures of A and B components have a pot life of at least three days.
Properties
- Color
- Physical Form
- Coolant Resistance Properties
- Cured Properties
- Uncured Properties
- Properties
ELASTOSIL® LR 3023/60 offers excellent coolant resistance, especially extremely low compression set in contact with coolant fluids.
- Note
- Cure conditions : 5 min / 165°C in press.
- Coolant resistance : After immersion 1000 h / 125°C in coolant / distilled water 50:50.
Value | Units | Test Method / Conditions | |
Compression Set (Glysantin® G40 / distilled water 50:50) | 55 | % | DIN ISO 815-1 |
Compression Set (Glysantin® G48 / distilled water 50:50) | 66 | % | DIN ISO 815-1 |
Elongation (at break, Glysantin® G40 / distilled water 50:50) | 280 | % | ISO 37 |
Elongation (at break, Glysantin® G48 / distilled water 50:50) | 290 | % | ISO 37 |
Shore Hardness A (Glysantin® G40 / distilled water 50:50) | 62 | — | DIN ISO 48-4 |
Tensile Strength (Glysantin® G40 / distilled water 50:50) | 5.6 | N/mm² | ISO 37 |
Tensile Strength (Glysantin® G48 / distilled water 50:50) | 5.6 | N/mm² | ISO 37 |
Value | Units | Test Method / Conditions | |
Compression Set (at 22 hours, 175°C) | 11 | % | DIN ISO 815-1 type B method A |
Density | 1.12 | g/cm³ | DIN EN ISO 1183-1 A |
Elongation (at break) | 300 | % | ISO 37 Type 1 |
Shore Hardness A | 60 | — | DIN ISO 48-4 |
Tear Strength | 15 | N/mm | ASTM D 624 B |
Tensile Strength | 5.9 | N/mm² | ISO 37 Type 1 |
Value | Units | Test Method / Conditions | |
Dynamic Viscosity (Shear rate 1 s⁻¹) | 1100000 | mPa·s | DIN EN ISO 3219 |
Dynamic Viscosity (Shear rate 10 s⁻¹) | 220000 | mPa·s | DIN EN ISO 3219 |
Regulatory & Compliance
- Certifications & Compliance
Packaging & Availability
- Country Availability
- Regional Availability
- Packaging Information
This product is available in 20 kg pail and 200 kg drum kits.
Storage & Handling
- Storage Information
Once opened, containers should always be resealed after use to prevent the platinum catalyst from being poisoned by amines, sulfur or phosphorus compounds.