Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Knowde for Suppliers
Segments
Nutraceuticals & Supplements
undefined
View All
HI&I Cleaning & Formulating
Chemical Manufacturing
Pharmaceuticals
Pulp & Paper
Oil & Gas
Agriculture & Feed
Case & Construction
Formulated Adhesives & Coatings
Food & Nutrition
Personal Care
Mining
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Elastomers
Thermoplastic Elastomers
Products in Thermoplastic Elastomers
3,792 Products found in Thermoplastic Elastomers
Browse
Applications
Show All 8 Categories
Filters
Suppliers
Applications
Polymer Name
Mechanical Properties
Physical Properties
End Uses
Products
Brands
Suppliers
Formulations
Documents
Relevance
MOCOM Compounds
WIPELAST TV 30 BK
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
1130.0 - 1130.0 kg/m³
Strain at Break:
10.0 - 10.0 %
Flexural Modulus:
1700.0 - 1700.0 MPa
WIPELAST TV 30 BK is a black composite made of polypropylene-EPDM, containing 30% talc filler. It is suitable for a variety of markets, including the automotive industry. Pre-drying is necessary at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to achieve a maximum moisture content of 0.10%. Injection molding is recommended, with a melt temperature of 200-270°C and a mold temperature of 20-60°C.
MOCOM Compounds
ALFATER® XL A40I 4GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
930.0 - 930.0 kg/m³
End Uses:
Sporting Goods, Shock Absorbers, Automotive Applications, Furniture, Handles, Racks, Sealing Lip, Cable Ducts, Soft Touch Applications, Electrical/Electronic Applications, Thin-walled Parts, Seals, Protective Caps, Shelves, Profiles, Construction Applications
Tear Strength:
16.0 - 16.0 kN/m
Features:
Chemical Resistant, Soft, Soft Touch, Flexible, Excellent Hydrolysis Resistance, Hot Air Resistant, Good Colorability, Good Flow, Ozone Resistant, Low Emissions, Good Weather Stability
MOCOM Compounds ALFATER® XL A40I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding. It has a melt temperature of 190-220°C and a mold temperature of 10-60°C with injection speed in the middle to high range, back pressure (hydraulic) greater than 3 bar and a holding pressure of 50-70% of injection pressure. It has a natural color with bright inherent color and is low emission, with good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used in the automotive, building and construction, electrical and electronic, sport and leisure, and furniture markets, and can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and two-component components.
MOCOM Compounds
WIPAFLEX TV 5 BK
Polymer Name:
PP/PE/EPDM
Processing Methods:
Injection Molding
Density:
960.0 - 960.0 kg/m³
Strain at Break:
65.0 - 65.0 %
WIPAFLEX TV 5 BK is a black composite material suitable for various automotive market segments. It contains polypropylene-polyethylene-EPDM as the base polymer and 5% talc filler. To achieve optimal processing conditions, it must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to ensure a maximum moisture content of 0.10%. The recommended processing method is injection molding, with a melt temperature range of 200-270°C and a mold temperature range of 20-60°C.
MOCOM Compounds
ALFATER® XL A55I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
940.0 - 940.0 kg/m³
CAS Number:
52255-49-9
Tear Strength:
22.0 - 22.0 kN/m
Labeling Claims:
Azo Colorants-free, PAH-free, PFOS-free, PFOA-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free, Azo Dyes-free
MOCOM Compounds ALFATER® XL A55I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer with temperatures of 70-80°C for 2-4 hours with a maximum moisture content of <0.10%. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is used mainly in the injection molding process with melt temperatures of 195-230°C, mold temperatures of 10-60°C, high injection speed, and back pressure (hydraulic) >5 bar and holding pressure 50-70% of injection pressure. It is used in automotive, building and construction, electrical and electronic, machinery, and furniture applications for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, plugs, fasteners, and connectors, 2K components.
MOCOM Compounds
ALCOM® TPU 810/3070.1 CF15
Polymer Name:
Thermoplastic Polyurethane (Polyester based)
Processing Methods:
Extrusion, Injection Molding
Chemical Family:
Polyurethanes (PU), Thermoplastic Polyurethanes (TPU)
End Uses:
Machine/Mechanical Parts, Automotive Applications
Density:
1250.0 - 1250.0 kg/m³
Labeling Claims:
Conflict minerals-free, PFOS-free, PAH-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free
Flexural Modulus:
600.0 - 600.0 MPa
Strain at Break:
25.0 - 25.0 %
Features:
Electrically Conductive, Reduced Surface Resistivity
MOCOM Compounds ALCOM® TPU 810/3070.1 CF15 is a polyurethane estertype base polymer with 15% carbon fibers as filler/additive system, and is electrically conductive with reduced surface resistivity. It is applicable in automotive and machinery market segments and can be used for various purposes such as functional components. For optimal performance, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at 80-110°C for 1-3 hours with a maximum moisture content of <0.05%.
MOCOM Compounds
ALFATER® XL A80I 2FE0002
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
2100.0 - 2100.0 kg/m³
CAS Number:
5036-48-6
Tear Strength:
17.0 - 17.0 kN/m
MOCOM Compounds ALFATER® XL A80I 2FE0002 is a thermoplastic vulcanisate (PP+EPDM), black in color, with a high density and noise dampening properties. It is suitable for injection molding, with a melt temperature of 195-230°C and mold temperature of 10-70°C. It has good weathering resistance, is resistant to alkalis, has good ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for applications in the automotive, machinery, building and construction, and electrical and electronic sectors, and has a service temperature range of -40-125°C. For optimal performance, it should be stored dry, protected from light, and tightly sealed, preferably at temperatures not exceeding 30°C.
MOCOM Compounds
ALFATER® XL D50I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
970.0 - 970.0 kg/m³
Features:
Flexible, Soft, Good Weather Stability, Ozone Resistant, Excellent Hydrolysis Resistance, Chemical Resistant, Hot Air Resistant
Tear Strength:
95.0 - 95.0 kN/m
MOCOM Compounds ALFATER® XL D50I 2GP0050 is a black thermoplastic vulcanisate (PP+EPDM) with excellent recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, impact protectors/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL A60I 3EF0010
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
950.0 - 950.0 kg/m³
Features:
Hot Air Resistant, Hydrolysis Resistant, Ozone Resistant, Good Flow, Good Weather Stability, Superior Surface Quality, Flexible, Excellent Hydrolysis Resistance, Soft, Soft Touch, Chemical Resistant
End Uses:
Construction Applications, Sealing Lip, Profiles, Furniture, Sporting Goods, Cable Ducts, Seals, Automotive Applications, Soft Touch Applications, Thin-walled Parts, Automotive Exterior Parts, Casters, Electrical/Electronic Applications, Protective Caps, Handles, Automotive Interior Parts, Shock Absorbers
Tear Strength:
23.0 - 23.0 kN/m
MOCOM Compounds ALFATER® XL A60I 3EF0010 is a black thermoplastic vulcanisate (PP+EPDM) designed for injection molding. It has a melt temperature of 190-220°C, mold temperature of 10-60°C, and injection speed of middle to high. It has back pressure of >3 bar and a holding pressure of 50-70% of the injection pressure. It is easy to flow, has a high surface quality, and is weather-resistant, chemical-resistant, ozone-resistant, hot air and hydrolysis resistant. Its market segment is automotive, building and construction, electrical and electronic, sport and leisure, and furniture, and its application areas are seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, 2K components, and casters. It also has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL A70I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
930.0 - 930.0 kg/m³
Labeling Claims:
Conflict minerals-free, PFOS-free, PAH-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free
Tear Strength:
29.0 - 29.0 kN/m
Features:
Good Weather Stability, Excellent Hydrolysis Resistance, Soft Touch, Hot Air Resistant, Ozone Resistant, Hydrolysis Resistant, Chemical Resistant, Soft, Flexible
MOCOM Compounds ALFATER® XL A70I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) with natural color, black and has good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for injection molding with a melt temperature of 195-230°C and a mold temperature of 10-60°C, making it suitable for a wide range of applications, such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL A75I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
Density:
930.0 - 930.0 kg/m³
Certifications & Compliance:
ISO 45001, ISO 14001, RoHS Compliant, Directive 2011/65/EC amended through EU/2015/863 (RoHS), REACH (UK), SVHC Compliant, ISO 13485, ISO 50001, EC No.1907/2006, REACH (Europe), ISO 9001, ISO 17025, IATF 16949
Tear Strength:
38.0 - 38.0 kN/m
MOCOM Compounds ALFATER® XL A75I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) polymer used in a variety of markets such as automotive, building and construction, electrical and electronic, machinery, and furniture. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is typically used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components.
MOCOM Compounds
ALFATER® XL A75I 4GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
940.0 - 940.0 kg/m³
Certifications & Compliance:
ISO 45001, ISO 14001, RoHS Compliant, Directive 2011/65/EC amended through EU/2015/863 (RoHS), REACH (UK), SVHC Compliant, ISO 13485, ISO 50001, EC No.1907/2006, REACH (Europe), ISO 9001, ISO 17025, IATF 16949
Tear Strength:
30.0 - 30.0 kN/m
MOCOM Compounds ALFATER® XL A75I 4GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material that features low emission, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It can be used in injection molding, with melt temperatures between 190-220°C, mold temperatures of 10-60°C, injection speed of middle to high, and back pressure of greater than 3 bar. It is suitable for use in automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications, such as seals, sealing lip, handles, racking/shelving, soft touch elements, impact protection/shock absorber, protection caps, thin walled parts, profile, cable ducts, 2K components, and casters. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, thermoplastic elastomer general, and ethylene propylene diene rubber, and has a service temperature range of -40-125°C.
MOCOM Compounds
ALFATER® XL D40E 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Extrusion, Injection Molding, Blow Molding, Coextrusion
End Uses:
Tubes, Construction Applications, Cable Guides, Air Ducts, Machine/Mechanical Parts, Electrical/Electronic Applications, Automotive Applications, Cable Jacketing, Furniture, Sealing Lip, Seals, Conduit, Bellows, Profiles
Density:
950.0 - 950.0 kg/m³
Tear Strength:
71.0 - 71.0 kN/m
Features:
Chemical Resistant, High Viscosity, Soft, Flexible, Excellent Hydrolysis Resistance, Hot Air Resistant, Ozone Resistant, Good Weather Stability
MOCOM Compounds ALFATER® XL D40E 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a black or natural color. It has high viscosity and good resistance to weathering, chemicals, ozone, hot air, and hydrolysis. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture industries for extruded parts, blow molded parts, coextrusion, profiles, seals, sealing lip, conduit, tubes, cable guides, cable jacketing, bellows, and air duct. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL ECO D40 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Blow Molding, Extrusion, Injection Molding, Coextrusion
Density:
970.0 - 970.0 kg/m³
CAS Number:
35545-57-4
Tear Strength:
73.0 - 73.0 kN/m
MOCOM Compounds ALFATER® XL ECO D40 2GP0000 is a thermoplastic vulcanisate polymer (PP+EPDM) in black color with polymer recyclate special features, suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications. Pre-drying conditions should be in a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of <0.10%. Processing extrusion requires a melt temperature of 190-230°C and an indie temperature of 190-220°C.
MOCOM Compounds
ALFATER® XL A75I 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding, Extrusion
Density:
960.0 - 960.0 kg/m³
Certifications & Compliance:
REACH (Europe), ISO 9001, ISO 17025, IATF 16949, ISO 45001, ISO 14001, RoHS Compliant, Directive 2011/65/EC amended through EU/2015/863 (RoHS), REACH (UK), SVHC Compliant, ISO 13485, ISO 50001, EC No.1907/2006
Tear Strength:
38.0 - 38.0 kN/m
MOCOM Compounds ALFATER® XL A75I 2GP0000 is a black thermoplastic vulcanisate (PP+EPDM) material suitable for injection molding. It is suitable for use in the automotive, building and construction, electrical and electronic, machinery, and furniture industries, and can be used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners & connectors, and 2K components. It has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL ECO A75I 2GP0001
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Coextrusion, Extrusion
Density:
950.0 - 950.0 kg/m³
Labeling Claims:
Low Carbon Footprint (PCF), PFOA-free, Azo Dyes-free, Sustainable, Bio-based, Azo Colorants-free, Recycled, PFOS-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free
Tear Strength:
35.0 - 35.0 kN/m
MOCOM Compounds ALFATER® XL ECO A75I 2GP0001 is a black Thermoplastic Vulcanisate (PP+EPDM) polymer recyclate with bio-EPDM, which has good weathering resistance, resistance to alkalis, ozone resistance, hot air resistance, and hydrolysis resistance. It is used for injection molded parts, extruded parts, and coextrusion and is suitable for applications such as seals, sealing lip, handles, racking/shelving, impact protection/shock absorber, protection caps, soft touch elements, cable ducts, casters, profiles, and 2K components. It has good adhesion with Polypropylene Homopolymer, Polypropylene Copolymer, polyethylene, Thermoplastic Vulcanisate (PP+EPDM), Thermoplastic Olefin Elastomer, and Thermoplastic Elastomer general and has a service temperature range of -40-125°C.
MOCOM Compounds
ALFATER® XL A55I 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Extrusion, Injection Molding
Density:
930.0 - 930.0 kg/m³
Features:
Soft Touch, Flexible, Hot Air Resistant, Soft, Hydrolysis Resistant, Good Weather Stability, Ozone Resistant, Excellent Hydrolysis Resistance, Chemical Resistant
Tear Strength:
22.0 - 22.0 kN/m
MOCOM Compounds ALFATER® XL A55I 2GP0000 is a thermoplastic vulcanisate (PP+EPDM) with a natural color, designed for injection molding. It has excellent recovery, weather resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for use in automotive, building and construction, electrical and electronic, machinery, furniture and injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/ shock absorbers, protection caps, cable ducts, plugs, fasteners & connectors, and 2K components. Furthermore, it is also capable of adhering to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL A50I 4FC0010
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
930.0 - 930.0 kg/m³
CAS Number:
68551-12-2
Tear Strength:
20.0 - 20.0 kN/m
Labeling Claims:
Azo Colorants-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free, Azo Dyes-free, Food Contact Acceptable, PAH-free, PFOS-free, PFOA-free
Certifications & Compliance:
REACH (Europe), ISO 45001, Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006, ISO 17025, RoHS Compliant, IATF 16949, EN 71/III, ISO 50001, ISO 14001, REACH (UK), ISO 13485, SVHC Compliant, ISO 9001
MOCOM Compounds ALFATER® XL A50I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) polymer with a natural color and bright inherent color. It is suitable for injection molding with a melt temperature of 190-220°C, mold temperature of 10-60°C, and injection speed of middle to high. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is compliant with EN 71-3 and is suitable for food contact. This polymer is suitable for packaging, household goods, food processing industry, toys, and injection molded parts and has a service temperature range of -40-125°C.
MOCOM Compounds
ALFATER® XL A90I 2GP0001
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Injection Molding
CAS Number:
64-02-8
Density:
950.0 - 950.0 kg/m³
Labeling Claims:
PFOA-free, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free, PAH-free, PFOS-free, Conflict minerals-free
Tear Strength:
50.0 - 50.0 kN/m
Certifications & Compliance:
EC No.1907/2006, ISO 17025, Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 14001, ISO 45001, SVHC Compliant, ISO 50001, REACH (UK), REACH (Europe), ISO 9001, IATF 16949, ISO 13485, RoHS Compliant
End Uses:
Connectors, Plugs, Automotive Interior Parts, Cable Ducts, Seals, Handles, Furniture, Automotive Exterior Parts, Fasteners, Electrical/Electronic Applications, Shock Absorbers, Casters, Protective Caps, Automotive Applications, Sealing Lip, Construction Applications, Machine/Mechanical Parts, Soft Touch Applications
MOCOM Compounds ALFATER® XL A90I 2GP0001 is a polymeric material that is processed with injection molding. It is a thermoplastic vulcanisate (PP+EPDM) with a natural color or gray, and features good recovery, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery, and furniture applications, and is used for injection molded parts such as seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fastener & connectors, and 2K components.
MOCOM Compounds
ALFATER® XL A85I 4PA0010
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
930.0 - 930.0 kg/m³
CAS Number:
68439-49-6
Labeling Claims:
Persistent Organic Pollutants (POP)-free, Conflict minerals-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, PAH-free, PFOS-free
Tear Strength:
40.0 - 40.0 kN/m
Certifications & Compliance:
IATF 16949, ISO 13485, RoHS Compliant, ISO 50001, REACH (UK), EC No.1907/2006, ISO 17025, REACH (Europe), Directive 2011/65/EC amended through EU/2015/863 (RoHS), ISO 9001, ISO 14001, ISO 45001, SVHC Compliant
MOCOM Compounds ALFATER® XL A85I 4PA0010 is a black thermoplastic vulcanisate (PP+EPDM) that has been adhesion-modified to polyamide. It offers easy flow, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. Additionally, it has a service temperature range of -40-125°C. ALFATER® XL A85I 4PA0010 is suitable for use in the automotive, building and construction, electrical and electronic, machinery, furniture, and injection molded parts markets, with typical applications including seals, sealing lips, handles, soft touch elements, impact protection/shock absorbers, functional components, casters, and 2K components.
MOCOM Compounds
ALCOM® TPU 810/4073 AR10
Polymer Name:
Thermoplastic Polyurethane (Polyester based)
Processing Methods:
Injection Molding
End Uses:
Machine/Mechanical Parts, Bearings, Automotive Applications, Sliding Parts
Density:
1210.0 - 1210.0 kg/m³
CAS Number:
27274-31-3
Chemical Family:
Thermoplastic Polyurethanes (TPU), Polyurethanes (PU)
MOCOM Compounds ALCOM® TPU 810/4073 AR10 is a polyurethane, estertype base polymer with 10% aramid powder filler/additive system, which provides improved sliding and wear. It is processed using injection molding with a melt temperature of 190 to 245°C and a mold temperature of 20 to 50°C. It is suitable for the automotive and machinery market segments and is typically used for bearings and sliding elements.
MOCOM Compounds
ALCOM® TPU 810/1998.1 CF
Polymer Name:
Thermoplastic Polyurethane (Polyester based)
Processing Methods:
Extrusion, Injection Molding
Chemical Family:
Polyurethanes (PU), Thermoplastic Polyurethanes (TPU)
End Uses:
Machine/Mechanical Parts, Automotive Applications
Density:
1240.0 - 1240.0 kg/m³
Labeling Claims:
Conflict minerals-free, PFOS-free, PAH-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free
Flexural Modulus:
410.0 - 410.0 MPa
Strain at Break:
32.0 - 32.0 %
Features:
Electrically Conductive, Reduced Surface Resistivity
MOCOM Compounds ALCOM® TPU 810/1998.1 CF is a Polyurethane, Estertype base polymer with a filler/additive system of 12% carbon fibers, featuring electrically conductive and reduced surface resistivity. It is intended for use in the Automotive and Machinery market segments and is suitable for various applications such as functional components.
MOCOM Compounds
ALFATER® XL A80I 4FC0010
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
930.0 - 930.0 kg/m³
Labeling Claims:
Food Contact Acceptable, Conflict minerals-free, PFOS-free, PAH-free, PFOA-free, Azo Dyes-free, Azo Colorants-free, Persistent Organic Pollutants (POP)-free
Tear Strength:
38.0 - 38.0 kN/m
Features:
Flexible, Good Flow, Good Weather Stability, Excellent Hydrolysis Resistance, Soft Touch, Hot Air Resistant, Food Contact Acceptable, Ozone Resistant, Chemical Resistant, Good Colorability, Soft
MOCOM Compounds ALFATER® XL A80I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) suitable for pre-drying conditions in a dry air (dessiccant) dryer at a temperature of 70-80°C for 2-4 hours. It has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance, as well as easy flow. It is compliant with EN 71-3, making it suitable for food contact, and is suitable for the packaging, household goods, food processing industry, toys, and injection molded parts, such as seals, sealing lip, handles, soft touch elements, protection caps, caps / closures, containers, kitchen ware, and 2K components.
MOCOM Compounds
ALFATER® XL A40I 4FC0010
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
930.0 - 930.0 kg/m³
CAS Number:
9004-74-4
Tear Strength:
25.0 - 25.0 kN/m
MOCOM Compounds ALFATER® XL A40I 4FC0010 is a thermoplastic vulcanizate (PP+EPDM) that is designed for injection molding applications. This material has a natural color with a bright inherent color and is compliant with EN 71-3 regulations for food contact. It is suitable for use in the packaging, household goods, food processing industry, toy markets, and other applications. The material has good colorability, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is easy to flow and can be used for injection molded parts such as seals, sealing lips, handles, soft-touch elements, protection caps, caps/closures, containers, kitchenware, and 2K components, making it a reliable choice for many applications.
MOCOM Compounds
ALFATER® XL A50I 4GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Density:
920.0 - 920.0 kg/m³
Tear Strength:
22.0 - 22.0 kN/m
Labeling Claims:
Azo Colorants-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free, Azo Dyes-free, PAH-free, PFOS-free, PFOA-free
Certifications & Compliance:
REACH (Europe), ISO 45001, Directive 2011/65/EC amended through EU/2015/863 (RoHS), EC No.1907/2006, ISO 17025, RoHS Compliant, IATF 16949, ISO 50001, ISO 14001, REACH (UK), ISO 13485, SVHC Compliant, ISO 9001
MOCOM Compounds ALFATER® XL A50I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) with natural color and bright inherent color. It has low emissions, good colorability, easy flow, excellent weathering resistance, excellent chemical resistance, excellent ozone resistance, excellent hot air resistance, and excellent hydrolysis resistance. It is suitable for injection molding and can be used for a wide range of applications, such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and 2K components. Additionally, it has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL D40I 2GP0050
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding, Injection Blow Molding
Density:
960.0 - 960.0 kg/m³
Labeling Claims:
Azo Colorants-free, PAH-free, PFOS-free, PFOA-free, Azo Dyes-free, Persistent Organic Pollutants (POP)-free, Conflict minerals-free
Tear Strength:
75.0 - 75.0 kN/m
MOCOM Compounds ALFATER® XL D40I 2GP0050 is a thermoplastic vulcanisate (PP+EPDM) that is used in injection molding and is available in natural color and black. It has good recovery, weathering resistance, chemical resistance, ozone resistance, hot air resistance, and hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, machinery and furniture applications, and can be used for seals, sealing lips, handles, impact protection/shock absorbers, protection caps, cable ducts, casters, plugs, fasteners, and connectors, and 2K components. It can adhere to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.
MOCOM Compounds
ALFATER® XL A70I 3EFSL0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Molding
Labeling Claims:
PFOS-free, Persistent Organic Pollutants (POP)-free, PAH-free, Conflict minerals-free, PFOA-free, Azo Dyes-free, Azo Colorants-free
Density:
950.0 - 950.0 kg/m³
Tear Strength:
23.0 - 23.0 kN/m
Features:
Excellent Hydrolysis Resistance, Chemical Resistant, Hot Air Resistant, Abrasion Resistant, Good Flow, Soft, Soft Touch, Ozone Resistant, Good Weather Stability, Flexible, Slip-Optimized, Superior Surface Quality
MOCOM Compounds ALFATER® XL A70I 3EFSL0000 is a thermoplastic vulcanisate (PP+EPDM) polymer suitable for injection molding. It has improved abrasion resistance, slip-optimized, easy flow, high surface quality, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is suitable for automotive, building and construction, electrical and electronic, sport and leisure, and furniture applications and can be used for injection molded parts such as seals, sealing lip, handles, soft touch elements, impact protection/shock absorber, bearings and sliding elements, thin walled parts, profile, cable ducts, 2K components, and casters. It has good adhesion to various polymers and has a service temperature range of -40-125°C. The polymer should be stored dry, protected from light, at a temperature not exceeding 30°C, and tightly sealed.
MOCOM Compounds
ALFATER® XL A65E 2GP0000
Polymer Name:
PP/EPDM
Processing Methods:
Injection Blow Molding, Blow Molding, Extrusion, Coextrusion, Injection Molding
CAS Number:
14433-76-2
Density:
930.0 - 930.0 kg/m³
Tear Strength:
28.0 - 28.0 kN/m
Labeling Claims:
Azo Dyes-free, Persistent Organic Pollutants (POP)-free, Azo Colorants-free, PFOA-free, PFOS-free, PAH-free, Conflict minerals-free
MOCOM Compounds ALFATER® XL A65E 2GP0000 is a Thermoplastic Vulcanisate (PP+EPDM) with a natural color, white, or black. It has high viscosity and good weathering, chemical, ozone, hot air, and hydrolysis resistance. It is suitable for use in the automotive, building and construction, machinery, electrical and electronic, and furniture market segments for extruded parts, blow molded parts, coextrusion profiles, seals, sealing lips, conduits, tubes, cable guides, cable jacketing, bellows, air ducts, and 2K components.
Ecomass Technologies
Ecomass® Compound 1005TU96
Density:
11000.0 - 11000.0 kg/m³
Ecomass® Compound 1005TU96 is a tungsten powder-filled polyether block amide (PEBA) compound that is flexible and exhibits excellent toughness. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) and is used for weighting, balancing, and radiation shielding applications.
Ecomass Technologies
Ecomass® Compound 4703ZD90
Density:
7900.0 - 7900.0 kg/m³
Ecomass® compound 4703ZD90 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing, radiation shielding and vibration dampening applications. This injection molding grade is known for its good toughness. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 4703ZD88
Density:
6800.0 - 6800.0 kg/m³
Ecomass® compound 4703ZD88 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing, radiation shielding and vibration dampening applications. This injection molding grade is known for its excellent toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 4703TU95
Density:
11000.0 - 11000.0 kg/m³
Ecomass® compound 4703TU95 is a tungsten-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing and radiation shielding applications. This injection molding grade is known for its high specific gravity, excellent toughness, and flexibility. Additionally, it functions as a nontoxic thermoplastic that can substitute lead.
Ecomass Technologies
Ecomass® Compound 5033TU95
Density:
9000.0 - 9000.0 kg/m³
Ecomass® Compound 5033TU95 is a high-specific gravity, tungsten powder-filled styrene isoprene styrene (SIS) compound that is flexible. The processing method for this compound is injection molding. It is a nontoxic alternative to lead (Pb) used for weighting and balancing applications.
Ecomass Technologies
Ecomass® Compound 1002TU96
Density:
11000.0 - 11000.0 kg/m³
Ecomass® compound 1002TU96 is a tungsten powder-filled polyether block amide compound that is utilized in various applications such as weighting, balancing, vibration dampening, and radiation shielding. This injection molding grade is known for its high specific gravity, superior toughness, and flexibility. Additionally, it is a nontoxic lead-substitute thermoplastic.
Ecomass Technologies
Ecomass® Compound 5033ZS91
Density:
6000.0 - 6000.0 kg/m³
Ecomass® compound 5033ZS91 is a stainless steel or tungsten-filled styrene isoprene styrene block co-polymer compound that is recommended to be used in weighting, balancing and vibration dampening applications. This injection molding grade is known for its high specific gravity, excellent toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 4703ZC76
Density:
3400.0 - 3400.0 kg/m³
Ecomass® compound 4703ZC76 is a stainless steel-filled thermoplastic polyurethane compound that is recommended to be used in weighting, balancing and vibration dampening applications. This injection molding grade is known for its good toughness and flexibility. Additionally, it functions as a nontoxic thermoplastic lead substitute.
Ecomass Technologies
Ecomass® Compound 1002CO90
Density:
5100.0 - 5100.0 kg/m³
Ecomass® Compound 1002CO90 is a high-specific-gravity, copper powder-filled polyether block amide (PEBA) compound. The processing method for this compound is injection molding/extrusion. Ecomass® Compound 1002CO90 is a nontoxic alternative to lead (Pb) and is used for weighting and balancing applications.
Show
36
of 3,792 results
Go to page
1
2
3
4
5
6
7
8
9
10