Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Technologies
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Electrical Properties
- Processing Information (Extrusion)
- Processing Information (Injection Molding)
Value | Units | Test Method / Conditions | |
Flexural Modulus | 600.0 | MPa | ISO 178 |
Flexural Strength | 20.0 | MPa | ISO 178 |
Shore Hardness D (15s) | 55.0 | — | ISO 868 |
Tensile Modulus | 600.0 | MPa | ISO 527 |
Tensile Strength | 45.0 | MPa | ISO 527 |
Tensile Elongation at Break | 25.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 60.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1250.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 58.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 62.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.05 | % | — |
Value | Units | Test Method / Conditions | |
Surface Resistance | max. 50 | Ohm | IEC 62631-3-2 |
Value | Units | Test Method / Conditions | |
Melt Temperature | 200 - 220 | °C | — |
Value | Units | Test Method / Conditions | |
Mould Temperature | 20 - 40 | °C | — |
Melt Temperature | 210 - 230 | °C | — |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 80-110 °C for 1-3 h
- In an air circulatIng dryer 80-110 °C for 1-3 h
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.