Products in Ready-to-Use Products: Solventborne Coating

Master STAGES™ RPO 6BF is a barium-free, nonstaining, water displacing, thin-film corrosion inhibitor or rust preventative which can be used on a variety of metals. RPO 6BF provides indoor corrosion inhibition, excellent protection for bearings and other precision parts, inprocess parts in storage, as well as parts in transit.

Chemische Industrie Enlargen GmbH CHING-ALVITE-COLOR-primer SFC 182 is PVC / AY primer coating with active corrosion protection for steel and non-ferrous metals; on galvanized steel for high quality duplex systems.

EnergyGuard Butyl Roof Coating is a solvent-based, vapor barrier roof coating. Useful for coating spray foam roofs on cold storage applications.

Ura-Zen™ AC is an 2K urethane clear coat. It maximizes gloss, DOI and UV resistance when applied over Hentzen intermix series urethane topcoats.

Tread-Shield® Topcoat (Clear) industrial epoxy coating is a two-component epoxy resin coating formulated with less than 2.8 lbs./gal. VOC (<340 grams/liter) while providing excellent adhesion, physical and chemical resistance properties. It provides unsurpassed protection for concrete, wood and metal surfaces and keeps these surfaces smooth, bright and more resistant to chemicals. Tread-Shield Topcoat functions as a primer on concrete and is available in clear, standard and custom pigmented formulations.

Carrera LTC™ is a clear ceramic coating capable of providing extremely high levels of chemical, corrosion and thermal protection in very thin films. When properly applied Carrera LTC will withstand substrate temperatures over 500°F. Carrera LTC will air cure over a period of 24 hours, though it will be dry to the touch and accept reasonable handling in less than 1 hour and may be placed in service after 8 to 10 hours. Maximum hardness is achieved after 7 days. Carrera LTC requires no surface etch and will bond to extremely smooth surfaces. Simply degrease and apply. The coating cures to a very hard, smooth surface with excellent adhesion. Carrera LTC has excellent resistance to UV. Carrera LTCis solvent based with very low to no V.O.C. depending on formulation.

SP-26 Primer is a 1.50 refractive index water based formulated to enhance adhesion of many types coatings on substrates. Is a solvent based primer that enhances adhesion of polyurethane, siloxane, melamine, and other coatings on glass, polycarbonate, composites, and other substrates.

DISSCO® 721 Emulsified Non-Fibered Foundation Coating is a cationic slow setting emulsified bitumen designed for use as a below grade foundation damp-proofing compound for applications where it is desired to prevent dampness or moisture that may be present in below-grade applications from penetrating the foundation, thus preventing the damp feeling common to most basements. However, where a high water content or hydrostatic pressure is present the coating to be used should be upgraded to a true waterproofing compound. It is suitable for use on almost any material such as concrete, masonry block, Styrofoam block, wood, steel, plastic. It is environmentally friendly containing no solvents. It is ready to use, no mixing or thinning is necessary and no heating required.

EPACOLOR RSPS 825 is a two-component aromatic hybrid elastomeric system, applied by spray with high-pressure machinery for EPS coatings in scenography, wood finishing, GRP and scenography.

Cellulose Poliur 2004 is a product in the Poliur 2004 Line that has been specifically designed for the Furniture Industry, allowing for a high quality finish after sanding with one of the Polyurethane Varnishes.

METAL-CLAD® ALKYD ENAMEL 1-HES-7400 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Combines state-of-the-art corrosion protection with excellent gloss retention, superior durability, and onecoat coverage. May be applied direct to metal without a primer. It is used as airless or conventional spray.

Excel-Thane “MCU-250” is CLEAR polyurethane sealers for decorative concrete that are moisture cured, abrasion resistant, and stain resistant. Its foundation is an aliphatic (non-yellowing) isocyanate with a polyester backbone. When cured,Excel-Thane “MCU-250” is a CLEAR with a high gloss finish.

Hard Industrial varnish is a varnish that is intended solely for use in the wood industry, for the varnishing of parquet, wood, and lambparquet, etc., which will be applied in various places, particularly those where the wood is subject to intense wear action, such as sports venues, gyms, ballrooms, schools, and so on.

S-500 Hardcoat is a 1.48 index solvent based hardcoat that provides a uv-absorbing, abrasion-resistant surface on polycarbonate substrates.

EnviroSand® Formaldehyde Free Pre-Cat Sealer was developed using M.L. Campbell’s solvent borne breakthrough Clean Cure™ Technology which provides an acid cure formaldehyde free amino-alkyd pre-catalyzed sealer that is both low odor and HAPs free helping to create a safer work environment. This sealer applies and sands easily and provides a smooth surface for EnviroMax Formaldehyde Free Pre-Cat topcoats. EnviroSand Sealer and EnviroMax Pre-Cat topcoats were specifically formulated to eliminate formaldehyde off gassing concerns from acid cure coatings on commercial and residential projects.

Optiseal AR is a clear, solvent based polyurethane surface sealer. It is used in industrial and commercial applications to both seal concrete floors and protect them from staining and chemical attack. Single pack, roller applied.

BR-3S solvent based two component polyurethane spray coating has a hardness of 80A and is extremely adaptable utilizing additives to find unique solutions while using inexpensive simple to use equipment. Easily applied using standard airless or conventional spray equipment as well by brush or roller. Designed for use in dynamic wet and dry small particle abrasion environments, this product excels in applications that include raw material processing, mineral extraction/floatation, pipes, and mixing/agitation.

Chemische Industrie Enlargen GmbH CHING-ALVITE-COLOR-primer (surface-tolerant) SFC 1082 is PVC / AY primer coating with active corrosion protection for steel, galvanized steel and non-ferrous metals. It is surface-tolerant and also suitable for manual derusting St 2-3.

DesignRclassic® Furniture Lacquer Sealer is a fine furniture quality nitrocellulose lacquer that has excellent build and is fast drying. DesignRclassic Lacquer Sealer sands smooth and provides a flat sealed surface for DesignRclassic Lacquer Clear, it was specifically developed for the furniture industry to provide excellent scratch and mar resistance, a nice smooth-touch feel, optimal flow, clarity and outstanding depth of color.

Chemische Industrie Enlargen GmbH CHING-EPE-primer ED 182 is EPE primer coating with active corrosion protection for steel and gray cast iron and it is resistant to hydraulic oils.

Berucoat AF 991 is a friction reducing and extreme pressure anti-friction coatings with excellent corrosion protection and is the preferred choice for metallic surfaces.

Vapor-Green® FC is a two-component, resin based membrane-forming moisture mitication system for use under resilient and hard surface floor coverings. This state-of-the-art, synthetic polymer formulation is made specifically for concrete moisture and alkalinity control applications on-grade, above or below-grade and meets or exceeds performance expectations of the new ASTM F-3010 standard. Contact Advanced Moisture Control, Inc. for more information on a wide-range of applications.

QC SURPRO SB A two-part, solvent-based polyurethane that forms a high-solids coating, QC SURPRO SB preserves and protects any interior above-grade concrete, masonry or stone (SB stands for solvent-based). This product meets federal VOC regulations and is highly resistant to most harsh chemicals (solvents, gasoline, etc.). QC SURPRO SB is the most durable, soil-resistant and chemical-resistant barrier coating of the QC sealers.

METAL-CLAD® ALKYD ENAMEL 6-HES-5050 is a all-purpose, durable utility enamel designed for new construction, industrial maintenance, OEM, and metal fabrication applications. Combines state-of-the-art corrosion protection with excellent gloss retention, superior durability, and onecoat coverage. May be applied direct to metal without a primer. It is used as airless or conventional spray.

Simon Quimica Laca PM 752 is a high gloss polyurethane finish paint. it can be applied with spray gun and used in conjunction with made 50 catalyst.

Clear Exterior Lacquer #8321 has Spray, Dip, Centrifugal Application Methods, Solvent Cleaner Reversibility, and also works as Reducer Special #2105 Thinner.

Primkote 8006-1 excels as a primer for concrete, metal and wood. It also performs well as a penetrating primer for weathered wood, concrete sealer, conditioner for urethanes, and tie-coat between epoxy surfaces.

Dropoline Super Enamel is a Synthetic finish paint for indoor and outdoor protection and decoration of wood and metal surfaces and structures.

UPI Sealant Products CS 250 25% Solids Cure & Seal is a 25% solids finishing membrane that enhances the curing process of freshly placed concrete and provides protection simultaneously. It forms a water retentive film that beneficially restricts moisture loss allowing concrete to reach its optimal cure and hardness, providing an economical alternative to costly, time-consuming water curing.

Blue River Coatings A-6000SG is a single component, low VOC, UV resistant clear coat system designed for protection of both newly coated and previously coated substrates when applied to waterborne and select solvent costings. It is designed to coat surfaces that require a hard, flexible, UV resistant coating.

Cipadeck® Paver & Concrete Sealer is a clear solvent based acrylic resin sealer for interlocking pavers and concrete. This sealer is available in gloss and anti-slip finishes that will not yellow on exterior exposure.

Westcoat SC-36 Fast Stain is a solvent soluble, penetrating, fast drying, drop in powder, dye stain. When it is used with acetone, this dye dries to the touch in just seconds. It produces colors from earth tones to vibrant colors on concrete and cementitious overlays.

Tripoxy™ is a two-component (1:1 mix ratio), high-solids, solvent-borne, polyamide cure, high-gloss epoxy enamel with USDA approval for incidental food contact. The cured film is extremely dense and hard, but not brittle. It is watertight and impermeable, making it suitable for submersion service. It is resistant to most common solvents, all alkalis, and most acids when splashed or spilled. The 41 series has good adhesion but only adequate wetting and penetration. Tripoxy, like all epoxies, chalks heavily when exposed to sunlight; this is noticeable after 6 months and continues for 12-18 months. Tritpoxey is also available in a clear form.

MiraGard HD50 is a unique, single component, solvent-based, ultra-hard clear acrylic sealer that offers a maximum VOC content of less than 50 grams per liter. Designed for use on interior and exterior conventional concrete, exposed aggregate and decorative concrete, cementitious coatings and overlays, MiraGard HD 50 Sealer is also suitable for unglazed brick or tile, and many other masonry surfaces to provide a “wet look”.

ProBlend 77 from SWT group is a specially formulated bitumen-based high solids rust preventative which will provide years of underbody corrosion protection for all types of vehicles in any environment. This latest offering from SWT Groups’ wide range of rust preventive products provides the additional benefit of superior chip resistance while minimizing road and powertrain noise incursion to the vehicle passenger compartment. ProBlend 77 exhibits superior durability against road salts and most automotive chemicals while standing up well to power washer spray and extreme weather conditions.

Chemische Industrie Enlargen GmbH CHING-silicone-primer SI 152 is SI zinc dust primer coating with cathodic corrosion protection for blasted steel. It is temperature resistant up to 600°C and resilience is only achieved after «stoving» for approx. 1 hour at 230-250°C.