Search
the marketplace
through 230,000 Chemicals and Raw Ingredients
through 8,000+ Supplier owned storefronts
Industries
Packaging
Product Families
View All
Nonwovens
Industrial
Films
Consumer
Compounding
Cosmetic Ingredients
Food Ingredients
Most popular categories
CASE Ingredients
Plastics
Pharmaceuticals & Nutraceuticals
Knowde for Suppliers
Knowde
Ready-to-Use Products
Products in Ready-to-Use Products
15,467 Products found in Ready-to-Use Products
Browse
Applications
Show All 6 Categories
Filters
Suppliers
Applications
Product Type
Application Area
Chemical Family
Products
Brands
Suppliers
Formulations
Documents
Relevance
Wacker Chemie AG
POWERSIL® Paste AP
Application Area:
Wires, Wire Cables
Chemical Family:
Silicones
POWERSIL® Paste AP is an opaque to whitish paste with a medium consistency. It exhibits good values for electrical insulation, permittivity, and dielectric strength. Additionally, POWERSIL® Paste AP shows minimal swelling of silicone elastomers it comes in contact with, thanks to the utilization of a special phenyl-silicone oil.
Wacker Chemie AG
ELASTOSIL® RT 705
Chemical Family:
Silicones
Product Type:
Encapsulant, Potting Compound, 1K (1 component) Sealant
Cure Method:
Heat Cure
Application Area:
White Goods
ELASTOSIL® RT 705 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is primarily used for potting and coating applications but can also be used as a surface adhesive when applied in a thin layer, such as by silk-screen printing. Once cured, ELASTOSIL® RT 705 exhibits excellent adhesion to various substrates and demonstrates long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.
Wacker Chemie AG
SEMICOSIL® 917
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Adhesive
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 917 is a shear-thinning, addition-curing, two-part silicone rubber that cures to a soft silicone gel when mixed with ELASTOSIL® CAT PT, ELASTOSIL® CAT PT-F, ELASTOSIL® CAT UV, or SEMICOSIL® 950 UV B. It offers fast curing at room temperature when combined with Catalyst PT-F, and it provides a long pot life at room temperature when used with Catalyst PT.
Wacker Chemie AG
ELASTOSIL® eco 7000 N
Product Type:
Solvent free (100% Solids) Sealant, 1K (1 component) Adhesive
Application Area:
Window Frames
Compatible Substrates & Surfaces:
Ceramic, Wood, Concrete, Plastics, Silicon, Metal, Glass
Cure Method:
Chemical Cure, Air Dry, Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® eco 7000 N is a one-component, neutral-curing, low-modulus silicone sealant with outstanding adhesion and a long shelf life for construction, glazing, and window applications, as well as industrial applications. ELASTOSIL® eco 7000 N is produced based on a 100% exchange of fossil-based raw materials for sustainably certified renewable materials. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.
Wacker Chemie AG
SILRES® BS 710
Product Type:
Solventborne Coating, Coating, 1K (1 component) Coating
Features:
Breathable, Vapor Permeable, High Molecular Weight, Water Resistant, Long Term Protection, Excellent Substrate Adhesion, Good Adhesion, Good Weather Stability, Anti-graffiti, Good Release Properties
Compatible Substrates & Surfaces:
Masonry, Painted Surfaces, Wood, Concrete, Brick, Stone
Chemical Family:
Silicones, Siloxanes
SILRES® BS 710 is a permanent anti-graffiti coating designed to protect concrete, masonry, wood, and pre-existing coatings. It is based on polyorganosiloxanes and provides excellent performance against exterior elements such as rain, sun, and temperature extremes. SILRES® BS 710 is a single-component product that cures at room temperature with ambient moisture. The cured coating offers excellent release properties and ease of removal for most permanent markers and aerosol paints.
Wacker Chemie AG
SEMICOSIL® 9882 A/B
Product Type:
2K (2 component) Adhesive
Application Area:
Power Control Unit (PCU), Form In Plastic Gaskets (FIPG), Housing, Electronic Control Unit (ECU), Cure In Place Gasket
Cure Method:
Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 9882 A/B is a two-component silicone rubber adhesive that exhibits thixotropic properties and cures at moderate temperatures. It has a thixotropic, pasty consistency, making it easy to apply and work with. This adhesive offers low hardness and low modulus, resulting in excellent compression-set properties and high elongation.
Wacker Chemie AG
ELASTOSIL® RT 708
Chemical Family:
Silicones
Product Type:
Encapsulant, Potting Compound, 1K (1 component) Sealant
Cure Method:
Heat Cure
Application Area:
White Goods
ELASTOSIL® RT 708 is a self-leveling, slightly thixotropic, one-part silicone that cures with heat. It is designed for potting and coating applications and can also be used as a surface adhesive when applied in a thin layer, such as through silk-screen printing. Once cured, ELASTOSIL® RT 708 exhibits excellent adhesion to various substrates and offers long-term stability against weathering, moisture, and UV light. The cured silicone rubber can withstand continuously changing climatic conditions, UV radiation, and temperatures as high as 230 °C (446 °F) without sustaining any damage.
Wacker Chemie AG
ELASTOSIL® RT 706
Product Type:
1K (1 component) Sealant, Potting Compound, Encapsulant
Application Area:
White Goods
Cure Method:
Heat Cure
Chemical Family:
Silicones
ELASTOSIL® RT 706 is a self-leveling, slightly thixotropic, one-part heat-curing silicone used for potting and coating applications. The cured material demonstrates very good adhesion to many substrates and long-term stability against weathering, moisture, and UV light. The cured silicone rubber can continuously withstand constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without sustaining damage.
Wacker Chemie AG
SEMICOSIL® 912
Product Type:
Encapsulant, 2K (2 component) Adhesive, Radiation Curable Coating, Potting Compound
Cure Method:
Radiation Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
SEMICOSIL® 912 is a pourable, addition-curing, two-part silicone rubber that, when combined with ELASTOSIL® CAT PT, ELASTOSIL® CAT PT-F, or ELASTOSIL® CAT UV, cures to form a soft silicone gel. It possesses low viscosity, making it easy to handle and process. The modular system of SEMICOSIL® 912 allows for flexible adjustment of the pot life and curing time by selecting from different catalysts. It is important to note that there is no binding between the base and catalyst, providing versatility in usage.
Wacker Chemie AG
VINNAPAS® UW 1 FS
Functions:
Shrinkage Reducing Agent, Binder & Resin
Chemical Family:
Polyvinyl Acetates (PVA), Vinyls, Vinylics & Vinyl Derivatives
Product Type:
Solventborne Adhesive
VINNAPAS® UW 1 FS is a tasteless, solid, thermoplastic homopolymer. It is a clear and colorless resin obtained through the polymerization of vinyl acetate. This versatile product finds application in various fields, including fiber-reinforced plastics, adhesives, powder injection molding, and sound damping.
Wacker Chemie AG
SEMICOSIL® 9242
Product Type:
1K (1 component) Adhesive, Encapsulant, 2K (2 component) Adhesive, Potting Compound
Application Area:
Sensors, Power Control Unit (PCU), Electrical Components, Housing, Electronic Control Unit (ECU)
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 9242 is a pourable, thermally curable, addition-curing one-part silicone rubber that cures to a very soft silicone gel. This product is ready-to-use, requiring no additional mixing. It exhibits thixotropic behavior, meaning it becomes shear-thinning during application. SEMICOSIL® 9242 offers rapid heat curing, allowing for efficient processing. Upon vulcanization, it forms a soft gel. With low levels of volatiles, uncured polymers, and ions, this silicone rubber ensures high purity. Additionally, SEMICOSIL® 9242 has the additional feature of ultraviolet fluorescence.
Wacker Chemie AG
ELASTOSIL® A 442
Product Type:
1K (1 component) Sealant
Application Area:
Gaskets
Compatible Substrates & Surfaces:
Plastics, Metal, Elastomers & Rubbers, Glass, Iron, Concrete
Cure Method:
Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® A 442 is a one-component, thixotropic sealant intended for use where a soft, high-elongation material is to be used. It is particularly effective as an adhesive in applications where the bonded joint is subjected to relatively large movements in service.
Wacker Chemie AG
ELASTOSIL® E70
Product Type:
Solventborne Adhesive, Solvent free (100% Solids) Sealant, 1K (1 component) Adhesive
Application Area:
White Goods
Cure Method:
Chemical Cure, Air Dry, Moisture Cure
Chemical Family:
Silicones
ELASTOSIL® E70 is a flowable, one-component, acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows excellent primerless adhesion to many substrates and outstanding heat stability even in long-term exposure. It is a high-temperature-resistant grade for sealing and bonding applications under high thermal stress.
Wacker Chemie AG
ELASTOSIL® SC 835 A/B
Foam Type:
Closed Cell Foam, 2K System
Density:
1140.0 - 1140.0 kg/m³
Chemical Family:
Silicones
End Uses:
Automatic Dispensing Equipment, Automotive Interior Trim, Cure In Place Foam Gasket, Gaskets
Physical Form:
Foam
ELASTOSIL® SC 835 A/B is a two-component silicone rubber that is flowable and addition-curing. It is specifically designed to form a closed cell foam structure. This material is highly compatible with automatic dispensing equipment, making it easy to process. ELASTOSIL® SC 835 A/B is ideal for the production of heat-resistant foam gaskets in a flat design, particularly for use in CIPG (Cured-in-Place Gasket) applications.
Wacker Chemie AG
POWERSIL® Fluid TR 50
Product Type:
Oil, Fluid
Application Area:
Power Transformers, Air Conditioners
Features:
Self Extinguishing, High Flash Point, High Temperature Resistance, High Fire Point, Good Thermal Stability, Wide Temperature Operating Range, Oxidation Resistant, Low Dielectric Constant, Non Corrosive, Non-volatile, Excellent Dielectric Properties, Excellent Compatibility
POWERSIL® Fluid TR 50 is a fully synthetic silicone fluid that is nonvolatile and noncorrosive. It possesses a high fire point and exhibits virtually self-extinguishing behavior, significantly reducing the fire hazard compared to conventional transformer fluids. This fluid demonstrates exceptional thermal stability, even in the presence of air, enabling higher thermal utilization when compared to other liquid coolants.
Wacker Chemie AG
ELASTOSIL® A07 Translucent
Product Type:
Solventborne Sealant, 1K (1 component) Adhesive
Application Area:
White Goods, HVAC Ducts
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® A07 Translucent is a free-flowing, solvent-based RTV-1 silicone dispersion. It cures at room temperature or at elevated temperatures by reacting with air humidity to form a flexible silicone coating. During cure, it splits off an organic amine. It can be applied by dipping, spraying, brushing, or coating. Thinner coatings can be obtained by the addition of solvents (e.g. toluene, white spirit); thicker coatings can be realized by multiple-step coating.
Wacker Chemie AG
ELASTOSIL® E47 Transparent
Product Type:
1K (1 component) Sealant
Application Area:
Gaskets, White Goods, Prosthetics
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® E47 Transparent is a non-slump, one-component acetoxy-cure silicone rubber that cures at room temperature under the influence of atmospheric moisture. It shows particularly excellent adhesion to cured silicone elastomers. Vulcanization can be accelerated by elevated temperatures (up to 80°C).
Wacker Chemie AG
ELASTOSIL® RT 772
Product Type:
Potting Compound, Encapsulant, 2K (2 component) Sealant
Application Area:
White Goods
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® RT 772 is a flowable, condensation-curing RTV-2 silicone used for potting and coating applications. When used with a curing agent from the WACKER® Catalyst T 77 series, it forms a self-bonding and durable silicone rubber. Cured ELASTOSIL® RT 772 offers excellent long-term stability against weathering, moisture, and UV light. The silicone elastomer can endure constantly changing climatic conditions, UV radiation, and temperatures as high as 230°C (446°F) without damage.
Wacker Chemie AG
SILRES® BS SMK 2101
Functions:
Water Repellent
Chemical Family:
Siloxanes, Silicones, Silanes
Product Type:
Solventless & High Solids Coating, Waterborne Coating, Primer
Compatible Substrates & Surfaces:
Concrete
SILRES® BS SMK 2101 is a solventless silicone microemulsion concentrate based on silanes and siloxanes that is diluted with water to yield a microemulsion. Dilute aqueous solutions of SILRES® BS SMK 2101 are high-quality specialty water repellents for hydrophobic impregnation and priming normal and reinforced concrete, as well as water resisting admixtures for non-load-bearing manufactured concrete products.
Wacker Chemie AG
POWERSIL® 567
Product Type:
1K (1 component) Coating, Insulating Coating
Features:
Good Toughness, Excellent Hydrophobic Properties, Good Tracking Resistance, Good Electrical Properties, Good Weather Stability, High Voltage Insulation
Compatible Substrates & Surfaces:
Glass, Epoxies
Application Method:
Spray
Chemical Family:
Silicones
POWERSIL® 567 is a one-component silicone dispersion that, upon curing, forms a durable high-voltage insulator coating with excellent electrical properties. It exhibits very good resistance to weathering and outstanding tracking resistance. Moreover, POWERSIL® 567 creates a long-term hydrophobic surface, effectively preventing the formation of wet conductive films and reducing the risk of pollution flashovers.
Wacker Chemie AG
HELISOL® XLP
Product Type:
Heat Transfer Fluid
Features:
Low Viscosity, Low Pour Point, Good Blocking Resistance, Low Density, High Linearity, High Reliability, Heat Resistance, High Durability, Long Shelf Life, Good Thermal Stability, High Efficiency, Wide Temperature Operating Range, Improved Heat Transfer Efficiency, Very Good Heat Resistance, High Temperature Strength, Anti-Fouling, Odorless, Non Corrosive
Chemical Family:
Silicones
HELISOL® XLP is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 35 mm²/s. Its unique chemical structure gives HELISOL® XLP exceptional properties that distinguish it from organic materials like mineral oils. This clear, odorless, and colorless liquid exhibits an outstanding property profile.
Wacker Chemie AG
WACKER® AKF 100
Features:
Low VOC, Good Release Properties, Good Balance of Properties, High Purity
WACKER® AKF 100 is a linear, non-reactive polydimethylsiloxane with a viscosity of approximately 100 mm²/s. It is renowned for its exceptional qualities, including a very low volatile content, high purity, and excellent release properties. These remarkable attributes make WACKER® AKF 100 stand out from organic materials like mineral oils, thanks to its unique chemical structure.
Wacker Chemie AG
ELASTOSIL® 8100 P
Product Type:
1K (1 component) Sealant
Compatible Substrates & Surfaces:
Metal, Glass, Ceramic, Wood, Concrete
Cure Method:
Moisture Cure, Chemical Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® 8100 P is a one-part, neutral-curing, low-modulus silicone sealant with excellent adhesion and a long shelf life for perimeter sealing, sanitary, and glazing applications. It cures at room temperature in the presence of atmospheric moisture to form a permanently flexible silicone rubber.
Wacker Chemie AG
SEMICOSIL® 989/1K
Product Type:
1K (1 component) Adhesive
Application Area:
Form In Plastic Gaskets (FIPG), Gaskets
Cure Method:
Heat Cure, Chemical Cure
Chemical Family:
Silicones
SEMICOSIL® 989/1K is a one-part, ready-to-use silicone rubber that cures through thermal curing. It is non-slumpy and exhibits thixotropic properties, making it easy to handle and apply. This transparent silicone rubber has a medium hardness, providing a balance between flexibility and rigidity. It cures rapidly with heat and offers primerless adhesion to a wide range of substrates.
Gelest Inc.
XYLEX® XYLEXPRO1
Ready-to-Use Product Type:
Disinfectant Products
Certifications & Compliance:
FDA 21 CFR 170.39, NSF Approved, EPA Registered
XYLEX® XYLEXPRO1 is a product designed to enhance the cleanability of surfaces when used alongside standard cleaning and disinfection protocols. By incorporating XYLEX® XYLEXPRO1 into the cleaning process, surfaces can remain hygienically clean for up to five weeks with just one application. Clinical testing conducted in hospital settings has demonstrated that this product enables more thorough and effective disinfection, leading to low adenosine triphosphate (ATP) levels on high touch surfaces. This allows hospitals to meet stringent ATP level standards for an extended period of time. XYLEX® XYLEXPRO1 is a water-based formula that is odorless and does not contain dye, fragrance, or harsh chemicals. It is available in both wipes and liquid forms.
Gelest Inc.
Biosafe® HE4001
Ready-to-Use Product Type:
Disinfectant Products, Waterborne Coating
Certifications & Compliance:
NSF Approved, EPA Registered
Application Method:
Dip Coating, Spray, Wipe
Biosafe® HE4001 Antimicrobial is a 0.75% aqueous solution of 3-(trihydroxysilyl)propyldimethyloctadecyl ammonium chloride. The product is registered with the EPA under the number 83019-6. It effectively binds to a wide range of surfaces, providing long-lasting protection. The key highlights of this product are as follows: Synergistically enhances the effectiveness of disinfection and sanitization. Has broad compatibility and can be incorporated in a vast variety of formulations and substrates. Excellent safety profile: non-toxic, non-irritating, and does not show transdermal absorption. Typical use concentrations of 0.25 - 0.5 weight % of active relative to the substrate being treated.
Gelest Inc.
Biosafe® HE4005
Ready-to-Use Product Type:
Disinfectant Products, Waterborne Coating
Certifications & Compliance:
NSF Approved, EPA Registered
Application Method:
Dip Coating, Spray, Wipe
Biosafe® HE4005 Antimicrobial is a 5% aqueous solution of 3-(trihydroxysilyl)propyldimethyloctadecyl ammonium chloride. It is worth noting that BIOSAFE HE4001 and HE4005 are the only registered silane quat antimicrobials produced using a methanol-free process. The product is registered with the EPA under the number 83019-5. It effectively binds to a wide range of surfaces, providing long-lasting protection. The key highlights of this product are as follows: Synergistically enhances the effectiveness of disinfection and sanitization Has broad compatibility and can be incorporated in a vast variety of formulations and substrates Excellent safety profile: non-toxic, non-irritating, and does not show transdermal absorption Typical use concentrations of 0.25-0.5 wt% of active relative to the substrate being treated
BASF
Lupasol® G 20 Waterfree
Chemical Family:
Polyethylenimine (PEI)
Functions:
Hardener, Polarizing Agent, Sizing Agent, Coupling Agent, Leveling Agent, Crosslinking Agent, Complexing Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® G 20 is a water-free polyethylene imine that functions as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, and aids in the complexation of heavy metal ions. It is used as a primer for improved adhesion to the substrate for coatings, facilitates the easier dispersion of pigments and provides higher color strength, and enables the immobilization of proteins on inorganic materials.
BASF
Dehypound® Advanced
Product Type:
Spot Removers, Industrial Cleaners, Institutional Cleaners
Application Area:
Hard Surfaces, Carpets, Floor
Certifications & Compliance:
EPA Registered, Safer Choice
Features:
Cost Effective, Detergency, Excellent Performance, Easy Formulation, Increases Foam Stability, High Flexibility, Low Foaming, Low Viscosity, Good Surface Care, Self Cleaning
Dehypound® Advanced is a 1% active (RTU) product in water that can outperform the performance of all-purpose cleaners commercially available. There is no need for any solvent or builder, as it performs well on its own. However, performance decreases when glycol ether solvents are used, so they should be avoided. The surfactant is mild for plastics. It is a non-ionic synergistic blend that is peroxide stable and ideal for carpet spot cleaners. It is listed on the EPA’s Safer Chemical Ingredients List.
BASF
Lupasol® PR 8515
Chemical Family:
Polyethylenimine (PEI)
Functions:
Hardener, Hydrophilizing Agent, Polarizing Agent, Sizing Agent, Defoamer, Coupling Agent, Leveling Agent, Crosslinking Agent, Complexing Agent, Hydrophobic Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® PR 8515 is a polyethylene imine that functions as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, aids in the complexation of heavy metal ions, facilitates the easier dispersion of pigments and increases color strength, and enables the immobilization of proteins on inorganic materials. It is also used as a primer to improve adhesion to the substrate for coatings.
BASF
Lupasol® G 20
Chemical Family:
Polyethylenimine (PEI)
Functions:
Lubricant, Hardener, Sizing Agent, Coupling Agent, Crosslinking Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® G 20 is a versatile polyethylene imine that serves as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, and aids in the complexation of heavy-metal ions. It also facilitates the easier dispersion of pigments and enables the immobilization of proteins on inorganic materials.
BASF
Lupasol® FG
Chemical Family:
Polyethylenimine (PEI)
Functions:
Hardener, Sizing Agent, Coupling Agent, Wetting Agent, Crosslinking Agent, Adhesion Promoter
Product Type:
Primer
Lupasol® FG is a polyethylene imine that serves as an adhesion promoter in adhesives, a crosslinker and hardener in epoxy and polyurethane adhesives, and is used for the complexation of heavy metal ions. It can also be used as a primer for improved adhesion of coatings to the substrate, for easier dispersion of pigments and higher color strength, and for the immobilization of proteins on inorganic materials.
Wacker Chemie AG
ELASTOSIL® RT 624 A/B
Product Type:
2K (2 component) Sealant
Application Area:
Gaskets
Cure Method:
Heat Cure, Air Dry, Chemical Cure
ELASTOSIL® RT 624 A/B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature. It is commonly used for bonding and sealing applications as well as for creating cured-in-place gaskets of the dry type. This product is known for its high tear resistance and long pot life at ambient temperature.
Wacker Chemie AG
SEMICOSIL® 950 UV B
Product Type:
Potting Compound, Radiation Curable Coating, 2K (2 component) Adhesive, Encapsulant
Application Area:
Power Control Unit (PCU), Sensors, Electronic Control Unit (ECU), Printed Circuit Boards, Connectors
Cure Method:
Chemical Cure, Radiation Cure, Air Dry
Application Method:
Spray
Chemical Family:
Silicones
SEMICOSIL® 950 UV B is used in combination with SEMICOSIL® 949 UV A as a sprayable, addition-curing, 2-part silicone rubber of low viscosity that cures extremely fast after activation by UV light exposure to a soft silicone elastomer. The applied mixture offers a process control option by UV light (it contains a UV tracer).
Wacker Chemie AG
ELASTOSIL® SC 833 A/B
Foam Type:
Closed Cell Foam, 2K System
Density:
480.0 - 480.0 kg/m³
Chemical Family:
Silicones
End Uses:
Automotive Interior Trim
Physical Form:
Foam
ELASTOSIL® SC 833 A/B is a pourable, addition-curing, two-component silicone rubber that forms a predominantly closed-cell foam. ELASTOSIL® SC 833 A/B exhibits excellent flame resistance and is self-extinguishing. This product is commonly used in applications such as automotive, aerospace, and railway industries.
Wacker Chemie AG
ELASTOSIL® N 2137
Product Type:
1K (1 component) Sealant
Application Area:
Form In Plastic Gaskets (FIPG), Gaskets
Cure Method:
Moisture Cure, Air Dry
Chemical Family:
Silicones
ELASTOSIL® N 2137 is a non-slump, one-part silicone rubber for sealing and bonding applications. When exposed to air moisture, it cures at room temperature to yield a permanently flexible silicone rubber with excellent heat resistance. Fully vulcanized ELASTOSIL® N 2137 shows long-term stability against weathering, moisture, and UV radiation. The silicone elastomer may continuously be exposed to constantly changing climatic conditions, UV radiation, and temperatures as high as 180 °C (356 °F) without damage.
Show
36
of 15,467 results
Go to page
1
2
3
4
5
6
7
8
9
10