Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Cure Method
- Application Details
Application Fields
- Sealing of connecting and expansion joints in the building industry
- Glass and windows construction
- Sealing of joints between glazing and supporting structure (frames, transoms, mullions)
- Industrial application as sealant in the automotive, aircraft and shipbuilding industries.
Processing
- The substrate areas that will be in contact with the sealant must be clean, dry and free of all loose material such as dust, dirt, rust, oil and other contaminants. Non-porous substrates When be cleaned with a solvent and a clean, lint-free, cotton cloth. Remove residual solvent before it evaporateFpaints with a fresh clean, dry cloth.
- It is the responsibility of the user to test the compatibility of the sealant with the adjoining materials. Incompatible substances like coating materials (paints, varnishes and glazes) or organic plasticizer containing rubbers (EPDM, butyl and neoprene) can lead to discoloration or other impairments like loss of adhesion of the sealant.
- Materials in direct contact with the applied sealant like cleaning agents and materials in indirect contact like gaseous emissions can damage the sealant in its function or change its appearance. Even a longer period of time in the darkness white joints may show a slight yellowing.
- Because of the multitude of these materials WACKER cannot make a general statement to the compatibility or adhesion of materials with the sealant. In case of doubt the user shall conduct appropriate preliminary tests. The time until complete curing may be extended at lower temperature, lower humidity, increasing film thickness or by low volume of air exchange.
Adhesion
ELASTOSIL® eco 7000 N exhibits excellent primerless adhesion to many non-porous siliceous materials, e.g. glass, tiles, ceramics, enamel, glazed tiles and clinker varnished or painted wood as well as many plastics. Users must carry out their own tests due to the great variety of substrates. The adhesion can be improved in many cases by pretreatment of the substrates with a primer.
- Applications
- ELASTOSIL® - Ready-to-Use Construction Sealants
- Sealants
- Silicone Sealants
Properties
- Odor
- Almost Odorless
- Cured Properties
- Uncured Properties
- Properties
- 100% silicone
- 100% replacement of fossil-based raw materials by renewable raws
- Long shelf life
- Primerless adhesion to most materials
- Non-corrosive to metals
- Suitable for alkaline substrates such as concrete, mortar, fibrous cement
- Non-sag
- Ready gunnability at low (+5 °C) and high (+40 °C) temperatures
- Rapid crosslinking: quickly becomes tack-free
- Flexible at low (-40 °C) and high temperatures (+180 °C)
- Excellent weatherability
- Excellent processing characteristics for professional use
- Note
Cured properties are cured after 4 weeks´storage at 23°C / 50 % r.h.
| Value | Units | Test Method / Conditions | |
| Elongation (at break) | 300 | % | ISO 8339-A |
| Modulus (at 100 % elongation) | 0.38 | N/mm² | ISO 8339-A |
| Movement Capability | 25 | % | ISO 11600 / EN 15651 |
| Shore Hardness A | 24 | — | ISO 868 |
| Tear Strength | 4.6 | N/mm | ISO 34, Method C |
| Tensile Strength | 0.7 | N/mm² | ISO 8339-A |
| Value | Units | Test Method / Conditions | |
| Consistency (at 23°C) | Non-sag | — | ISO 7390, Profile U 20 |
| Curing Rate (at 23°C, 50% r.h) | approx. 3 | mm/day | — |
| Density (at 23°C) | 1.03 | g/cm³ | ISO 1183-1 A |
| Extrusion Mass Flow Rate (at 6 bar, 23°C) | 200 | g/min | — |
| Skin Formating Time (at 23°C, 50% r.h) | 25 | minutes | — |
Regulatory & Compliance
- Certifications & Compliance
- Chemical Inventories
- Quality Standards
- Restrictions in Use
- ELASTOSIL® eco 7000 N must not be used for insulating glass applications
- ELASTOSIL® eco 7000 N must not be used for structural glazing or bonding.
- ELASTOSIL® eco 7000 N is not recommended for use on natural stones, such as marble, granite, quartzite, as it can cause staining.
- ELASTOSIL® eco 7000 N is not recommended for the construction of aquaria.
- ELASTOSIL® eco 7000 N is not suitable for food grade applications where the joints are likely to come in contact with food.
- ELASTOSIL® eco 7000 N is not recommended for application in permanently wet areas where the joint is strongly or permanently exposed to water, e.g. in swimming pools or public sanitary facilities, please contact our technical service.
- ELASTOSIL® eco 7000 N is not suitable for mirror mounting.
Safety & Health
- Safety Note
- During vulcanization ethanol is released. These vapors When not be inhaled for long periods or in high concentration. Hence, good ventilation of the work place is necessary.
- When unvulcanized RTV-1 silicone rubber come into contact with eyes or mucous membranes, the affected area must be rinsed thoroughly with water as irritation will otherwise be caused. Cured silicone rubber, however, can be handled without any risk to health. Keep away from children.
Packaging & Availability
- Country Availability
- Regional Availability