Products in Powder Coatings

BIOLAY 500 is a specialized powder designed for grease barrier coating formulations. It's composed of a mixture of polysaccharides, making it a plant-based and environmentally friendly choice. One of its notable features is that it's entirely free from fluorine and doesn't generate microplastics, aligning with sustainable and safety standards. You can easily apply aqueous solutions of BIOLAY 500 to paper and cardboard, making it an ideal choice for creating effective grease barriers in these materials. Unlike BIOLAY 100, BIOLAY 500 has been optimized for exceptional oil repellency, making it a preferred option for applications where this property is crucial. It's important to note that solutions of BIOLAY 500 may have higher viscosities compared to BIOLAY 100, even at the same solids content.

BIOLAY 100 is a versatile powder designed for grease barrier coating formulations. In its off-white powder form, BIOLAY 100 offers a sustainable and eco-friendly solution for various applications. This product, derived from plant-based raw materials, is entirely free from fluorine and microplastics, aligning with environmental and safety standards. BIOLAY 100 can be easily applied using standard coating equipment like film presses, size presses, blade coaters, or curtain coaters. When applied to paper and cardboard, it demonstrates exceptional grease barrier properties, making it an ideal choice for eco-conscious and effective barrier coating solutions.

Farboset® 9025 is a nonanhydride epoxy powder coating that is specifically formulated for use as an encapsulant for electronic components. One of its key characteristics is its excellent resistance to cracking during thermal cycling, which makes it ideal for applications where electronic components are subjected to temperature variations. This epoxy powder coating is designed for coating various electronic components, including resistor networks, hybrid circuits, varistors, and ceramic capacitors.

Farboset® 9251 is a nonanhydride epoxy powder coating designed for applications where fast cure and thermal resistance are essential. This compound is particularly suitable for encapsulating motor iron applications and is recommended for various applications, including meter coils, busways, stators, rotors, and armature insulation. It provides the required thermal resistance and fast curing for these applications.

Farboset® 9544 is designed for coating a variety of electronic components, including resistor networks, hybrid circuits, varistors, and ceramic capacitors. Its resistance to cracking during thermal cycling is a valuable feature for maintaining the integrity of these components when subjected to temperature variations. Additionally, it can be applied using wheel and fluid bed equipment, providing flexibility in the coating process.

Farboset® 9081 is a nonanhydride epoxy powder coating specifically formulated for low-temperature applications, making it suitable for heat-sensitive electronic components. It is ideal for encapsulating film and ceramic capacitors that require processing at low temperatures. This compound can be applied using various techniques such as fluidized bed coating, wheel coaters, or electrostatic spray methods.

Farboset® 9146 is a nonanhydride epoxy powder coating with a dielectric grade, making it suitable for applications where superior electrical and moisture resistance is required. This compound is designed for encapsulating various electronic components, including hybrids, mica capacitors, and other semiconductor-grade devices that demand high purity and optimal moisture performance. Its excellent adhesion characteristics make it an ideal choice for chip on board applications.

Farboset® 9020 is a nonanhydride epoxy powder coating known for its excellent moisture resistance. It is specifically designed for encapsulating components such as ceramic and film capacitors, coils, thermistors, and resistors. This coating helps protect these components from moisture and environmental factors, ensuring their performance and reliability. Farboset® 9020 can be applied using various methods, including fluidized bed, wheel coaters, and electrostatic spray techniques.

Detectable powder coating

TCI Powder Coatings LC Red Oxide Primer (7760-3931) is an epoxy coating formulated to provide excellent chemical and corrosion resistance, as well as good properties such as adhesion and flexibility. It is ideally suited for interior applications or as a primer.

TCI Powder Coatings CNH Black Primer 3P 86628057 (9720-91950) is a TGIC polyester coating formulated as the universal product line that is also available in a broad spectrum of colors, while providing very good performance and application properties.

TCI Powder Coatings MIL Spec Primer 32348 (7820-71737) is a phenolic-cured novolac- modified epoxy coating formulated to provide excellent chemical and corrosion resistance, as well as good properties such as adhesion and flexibility. It is ideally suited for interior applications or as a primer.

TCI Powder Coatings OGF Epoxy Hybrid Primer (7820-12396) is an epoxy coating formulated to provide excellent chemical and corrosion resistance, as well as good properties such as adhesion and flexibility. It is ideally suited for interior applications or as a primer. Reduce cure schedule to 5min at 375F if followed by powder top coat. Fully cure as indicated if used with liquid top coat. Pre-test with intended top coat to validate production conditions.

American Powder Coatings Sky White T9-WH1 is a polyester-TGIC high gloss and it is used as functional, decoractive coatings.

TIGER Drylac® 038/30041 is a polyester tgic super durable powder coating compliant to AAMA 2604 with excellent weather resistance properties for high performance architectural exterior applications.

TCI Powder Coatings Sam Primer Gray (7010-71529) is an epoxy coating formulated to provide excellent chemical and corrosion resistance, as well as good properties such as adhesion and flexibility. It is ideally suited for interior applications or as a primer.

IGP-DURA® face 5807 is a weather resistant, silk gloss coating system on saturated polyester resin base, the corresponding hardener plus special heat, light and chalk resistant pigments.

The TE06 Powder coatings are thermosetting paints, which means that when heated, they transform irreversibly into a very hard adherent plastic material with a high index of resistance to most chemical agents, resulting in high-quality coatings in a single layer that can be shiny, satin, matte, textured, granite, transparent, metallic, and so on. Its physical composition is 100 percent dry extract, which can be applied using various electrostatic processes on a variety of supports (metal, glass, ceramics, and so on), followed by a predetermined stuffing.

IGP-DURA® face 5809 is a weather resistant, gloss coating system on a saturated polyester resin base, the corresponding hardener plus special heat, light and chalk resistant pigments.

American Powder Coatings Beige H4-PY8 is a Hybrid Semi-Gloss and it is used as functional, decoractive coatings.

IFS Coatings SRSL21708 (2604 Military Lt Blue) is a Thermosetting superdurable polyester TGIC powder coating designed for interior and exterior use where long term color and gloss retention is required. When properly applied over an appropriate substrate, this product will meet or exceed the requirements of the AAMA 2604-05 specification.

American Powder Coatings Bright Green T9-GN18 is a polyester-TGIC high gloss and it is used as functional, decoractive coatings.

Cardinal Paint and Powder Red 90 Gloss T009-RD01 is a red full gloss smooth color used as polyester TGIC powder coating.

American Powder Coatings Putty T6-PY2 is a polyester-TGIC semi Gloss and it is used as functional, decoractive coatings.

IBA Kimya San. ve Tic. A.S. PE21 is a thermosetting powder coatings based on polyester resins designed for exterior industrial applications. It provides decorative and durability characteristics combined with excellent overall performance. It has good UV and excellent yellowing resistance.

Gencote 519 ® FEP is a tetrafluoroethylene/hexafluoropropylene copolymer. Gencote-519-FEP is chemically inert due to its complete fluorination. This, together with the high temperature, Gencote-519-S has a temperature range of up to 390°F and nonstick properties. FEP is an excellent universal coating for harsh chemical service.

American Powder Coatings LC Almond T8-AL2 is a polyester-TGIC high gloss and it is used as functional, decoractive coatings.

Cardinal Paint and Powder Red Texture T241-RD129 is a red semi gloss texture color used as polyester TGIC powder coating.

Cardinal Paint and Powder Dark Red 90 GLOSS P009-RD02 is red full gloss smooth used as polyester polyurethane powder coating.

IFS Coatings SRSL45893 (2604 Antique Bronze) is a Thermosetting super polyester TGIC powder coating designed for interior or exterior use. When properly applied this product will meet or exceed the AAMA 2604-5 specification.

IBA Kimya San. ve Tic. A.S. PE22 is a thermosetting matt powder coatings based on polyester resins designed for exterior applications. It provides decorative and durability characteristics combined with excellent overall performance. It has good UV and yellowing resistance. It is designed specifically for outdoor applications where color and gloss retention are critical.

American Powder Coatings SD Lime Green T8-GN35 is a polyester-TGIC high gloss and it is used as functional, decoractive coatings.

American Powder Coatings HI- Reflectance White T9-WH22 is a polyester-TGIC high gloss and it is used as functional, decoractive coatings.

IGP-DURA® face 5803 is a weather resistant, mat coating system on saturated polyester resin base, the corresponding hardener plus special heat, light and chalk resistant pigments.

IGP-DURA® face 581M is Excellent light and weather resistance Impact-proof surface with decorative fine structure and effect Good elasticity Non-yellowing in direct-heat gas ovens.

Halar ®(ECTFE) is a melt-processable fluoropolymer from Allied Corporation, Halar E-CTFE is the result of a 1:1 alternating copolymer of ethylene and chlorotrifluoroethytene. Halar E-CTFE is a tough material with excellent impact strength and abrasion resistance, with excellent chemical resistance, and a broad use temperature range ranging from cryogenic to 320°F.