Products results

PHOTOMER® 4017 (HDDA) is a low viscosity diluent for UV and EB radiation curable lacquers and pigmented coatings, used in paper and board coatings, wood finishes vinyl flooring and flexible vinyl.

Photomer® 4184 is a monofunctional urethane acrylate which can be used as a reactive diluent for radiation curable coatings, inks and adhesives. It is non-yellowing with a low odor and offers improved flexibility and adhesion to plastics. It exhibit of low shrinkage and high elongation and stress at break with a Tg of - 3°C.

HyPrint 60 is a Naphthenic ink oil marketing specification. This is severely hydrotreated naphthenic printing ink oil has a low odor level, and good solvency and volatility.

SCG Chemicals LP1100P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP11IOOP is guaranteed its high quality for various applications.

MM-220 is a low viscosity mono-acrylate monomer. The polycyclic ring structure helps minimize shrinkage on cure. It also has low weight loss on cure. 

SCG Chemicals WD2040P is the polyethylene homopolymer wax having unique properties produced from thermal cracking process. Our high technologies and processing control, resulting in good consistency of qualities with uniform color and physical characteristics of wax so it can be used in various applications.

Jiangsu Tetrachem TTA11 is a clear liquid epoxy with the chemical name 4-Vinyyl-1-Cyclohexene 1,2-Epoxide. This product is reactive through its vinyl and epoxy abilities. It also can be used as a reactive diluent where high crosslink density is not crucial. TTA11 is primarily used in sealants.

Gevo™ High Purity Isobutanol acts primarily as a solvent. Is fully renewable and meets all of the purity as well as performance requirements of isobutanol derived from conventional petroleum sources. Possesses slow evaporation rate. Can replace 100 percent of conventional isobutanol in all applications. Because isobutanol has similar properties to n-butanol, this renewable isobutanol may be used as a cost-effective and renewable n-butanol replacement in many n-butanol applications. Is also a cost-competitive source of renewable butenes and renewable butene derivatives. Used in lacquers, paints and coatings.

Dynamic International Ethylene Glycol Monomethyl Ether (EM) is mainly used as solvent for grease, nitrocellulose, synthetic resin, alcoholate dyestuff and vinylcellulose. In coating industry, it can be used as varnish dryer and coating diluent.

Denacol EX-810 is used in cross-linking agent for resin Hydrophilizing agent.

HyPrint 1200 is a Naphthenic ink oil marketing specification. This is severely hydrotreated naphthenic printing ink oil has a low odor level, and good solvency and volatility.

Kanamoll 650 is a vegetable oil-based light colored secondary plasticizer. ESBO is manufactured from soybean oil through the process of epoxidation. It is been used widely as plasticizer because of high numbers of epoxidized carbon-carbon double bonds. The epoxide group is more reactive due to double bonds, thus making it a good hydrochloric acid scavenger and plasticizer.

Gazprom neftekhim Salavat Industrial isobutyl alcohol is produced by the process by oxo synthesis and used as a solvent in paint and coatings industry, in production of esters and other chemicals.

PHOTOMER® 4006 (TMPTA) is an aliphatic trifunctional acrylate of low viscosity and excellent crosslinking reactivity. In comparison to other trifunctional acrylates, it is an effective reactive diluent with excellent solvency and viscosity reducing characteristics in UV/EB curable formulations based on epoxy, polyurethane, and polyester oligomers.

Elvanol™ 90-50 by Kuraray is a fully hydrolyzed, medium-to-low viscosity polyvinyl alcohol. Provides high film strength and binding power in relatively low -viscosity systems. Offers oil-, grease-, water and solvent resistance. It combines efficient binding with excellent high shear rheology, controls backside lint and surface debris and provides superior holdout. It is compatible with modified starches. Used in adhesives for porous substrates including paper and paperboard, hot-water soluble film, and as a binder for pigments or other solid particles. It is particularly useful as a pigment binder for ceiling tile primers. Elvanol™ 90-50 complies with FDA regulation.

Dynamic International Diethylene Glycol Monobutyl Ether (DB) is mainly used as the solvent for nitrocellulose, synthetic resin, painting, enamel, grease and paint deleting reagent. It is used as medicine extraction in pharmacy industry and resin plasticizer in plastics industry, fiber lubrication reagent in textile industry and dispersing agent of chemical fiber oil regent.

MFHF is a Medium for Hammer Finish.

Photomer® 4361 is an ethoxylated analog of 1,6-hexanediol diacrylate (Photomer® 4017). It is a very low irritation monomer which can be substituted for HDDA due to its comparable solvency characteristics. This monomer can be used as a high performance diluent in UV/EB energy curable coatings and inks.

Designer Molecules CS-697 is a polyglycidyl ether cyclosiloxane monomer. The structure above shows a representation of the predominant component. Low viscosity and low color make it ideal for formulating adhesives. This resin is very compatible with most organic resins.

TECHSPRAY Turbo-Coat Thinner can be used to reduce viscosity to match ideal process parameters. Turbo-Coat, Turbo-Coat HV, and Turbo-Coat Thinner are all HAPs (Hazardous Air Pollutants) free, which means they do not contain common coating solvents such as Toluene, Xylene, and MEK. As a result, these coatings are more user-friendly and safe.

MM-304 is a liquid mono-functional methacrylate monomer. It has similar properties as Isobornyl Methacrylate (IBOMA) when polymerized but with lower weight loss on cure. It has a mild, pleasant odor. MM-304 has good resistance to hydrolysis.

SCG Chemicals LP1040P is a refined polyethylene homopolymer wax which is derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1O40P is guaranteed its high quality for various applications.

Bisomer® PEA6 is a hydroxyl functional methacrylate monomer.

SCG Chemicals LP1020P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary Of SCC Chemicals co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1020P is guaranteed its high quality for various applications.

Sunnyside corporation General Purpose Thinner 476G1 is useful as a general purpose clean up solvent and thinner for oil based coatings where a low VOC product is required.

SCG Chemicals LP1024P is a refined polyethylene homopolymer wax derived from the unique HDPE process by Thai Polyethylene Co., Ltd., a subsidiary of SCG Chemicals Co., Ltd. Under the operational excellent along with the high technology (close loop refinery), LP1024P is guaranteed its high quality for various applications.

Sunnyside corporation LACQUER THINNER 457 is a fast evaporating, extremely flammable organic solvent mixture. It is designed for thinning lacquer and epoxy coatings, and is also recommended for clean up of spray guns and other application equipment.

HyPrint P40 is a Naphthenic ink oil marketing specification. This is severely hydrotreated naphthenic printing ink oil has a low odor level, and good solvency and volatility.

Bisomer® PPA6 is a hydroxyl functional acrylate monomer.

Dynamic International Dipropylene Glycol Monoethyl Ether (DPE) suitable for benzene propylene emulsion, propylene alkenes acid emulsion and its emulsion paint, which are characterized by reducing the coating temperature, speeding its cohesion and keeping the coating in a good condition.

Gazprom neftekhim Salavat Industrial n-butyl alcohol is produced by the process of Oyo sythesis and use as a a solvent in paint and coatings industry, also in synthesis of various organic products, production of chemical reagents etc.

PCC Chemax DME Aerosol is an organic compound from the group of ethers. It is a colorless gas with a characteristic odor, moderately soluble in water. The product in aerosol is used as a propellant (factor for discharging content). It is used instead of the previously applied CFCs, as it has no harmful effect on the ozone layer. The product is therefore environmentally friendly. DME in the aerosol present in a concentration of not less than 99.99%. It is produced in the dehydration of methanol followed by DME rectification.

HyPrint MVI 1200 is a Naphthenic ink oil marketing specification. This is severely hydrotreated naphthenic printing ink oil has a low odor level, and good solvency and volatility.

Barvy A Laky Farm Linen P6420 is a thinner for fermage paints and oil-based glazing sealants.

Dynamic International Dipropylene Glycol Monomethyl Ether (DPM) suitable for benzene propylene emulsion, propylene alkenes acid emulsion and its emulsion paint, which are characterized by reducing the coating temperature, speeding its cohesion and keeping the coating in a good condition.

Omnimer VCL is a reactive diluent for radical initiated UV radiation cured coatings and inks with excellent hydrophobic properties and good flexibility.