Products

AGC Chemicals Americas, Inc. LUMIFLON® LF-200F is a moderate molecular weight, moderate hydroxyl number resin consisting of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). This product has been developed in flake form in order to enable formulators to meet VOC and HAPS regulations. This resin can be dissolved in VOC and HAPS exempt solvents such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate to meet the strictest air quality requirements. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

AGC Chemicals Americas, Inc. LUMIFLON® LF-810 Resin is a high molecular weight, low OH number fluoropolymer resin. This product is meant to be formulated without crosslinkers, yielding coatings with extremely high weatherability and corrosion resistance. Potential applications for coatings made with it include architectural, industrial maintenance, and bridge coatings. LUMIFLON® polymers consist of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites.

AGC Chemicals Americas, Inc. LUMIFLON® LF910LM - FEVE Resin Polyol is a fluoroethylene vinyl ether solventborne polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It has low molecular weight coupled with a high hydroxyl value and is formulated into 2K crosslinkable coatings. Low molecular weight also allows for easy blending with other polyols. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. LUMIFLON® LF-916F is a low molecular weight resin that is used to create coatings with high crosslink density. This resin is made of alternating fluoroethylene and alkyl vinyl ether segments (FEVE) and comes in flake form to comply with regulations for VOC and HAPS. It can be dissolved in solvents that are exempt from these regulations, such as acetone, Oxsol® 100, t-butyl acetate, and dimethyl carbonate. These resins are used to produce coatings that are highly resistant to weathering, and are commonly used in various industries like architecture, aerospace, automotive and industrial maintenance.

AGC Chemicals Americas, Inc. LUMIFLON® FE-45000 is a water emulsion product developed to enable formulators to meet VOC and HAPS regulations on many solvents in the US. This product has low hydroxyl functionality and is designed for use in single-component coatings. Like other LUMIFLON® resins, it is used to produce coatings with high gloss and excellent weatherability. This product can also be used in blends with standard acrylic resins to substantially improve weathering of these conventional products. LUMIFLON® polymers consist of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. These resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

AGC Chemicals Americas, Inc. LUMIFLON® FD1000 - FEVE Waterborne Resin Polyol is a fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is a polyol used in 2K polyurethane coatings and may be used as a blending resin in 1K systems. It has a low molecular weight combined with a high hydroxyl value for creating 2K waterbased polyurethane coatings with a high crosslink density. This waterborne polyol is classified as a dispersion as it is synthesized without emulsifier. This unique, emulsifier-free technology allows for the formulation of waterbased 2K polyurethane coatings with the same performance as traditional solventbased 2K coatings. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. LUMIFLON® FE-4400 Isocyanate is a water emulsion developed to meet VOC and HAPS regulations on some solvents in the US. It is a hydroxyl functional compound that can be crosslinked with water-dispersible polyisocyanates. Like other LUMIFLON® resins, this product is used to produce coatings with high gloss and excellent durability. LUMIFLON® polymers consist of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. These resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets.

AGC Chemicals Americas, Inc. LUMIFLON® FE4300 - FEVE Waterborne Resin Polyol is a fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It is used as a blending resin for coatings that need high performance at a low VOC. It has a high molecular weight for 1K coatings with excellent resistance properties. Markets include light duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. LUMIFLON® LF-9716 consists of alternating fluoroethylene and vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV resistance and weatherability as well as chemical resistance, while the vinyl ether segments provide crosslinking sites. LUMIFLON LF-9716 has extremely high hydroxyl functionality and has a high crosslink density after reaction with isocyanates. This resin is useful wherever excellent chemical resistance is required. Typical applications include coatings for aerospace, tank lining, water tanks, and military coatings

AGC Chemicals Americas, Inc. LUMIFLON® FE4400 - FEVE Waterborne Resin Polyol is a hydroxyl functional fluoroethylene vinyl ether waterborne resin used in applications requiring outstanding exterior durability. It can be used as the sole binder or as a blending resin for coatings that need high performance at a low VOC. It can be crosslinked with polyisocyanates for air dry applications or either blocked polyisocyanates or amino resins for bake applications. Its high molecular weight makes it suitable for 1K coatings as well. Markets include light duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. LUMIFLON® LF-9721 consists of alternating fluoroethylene and vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV resistance and weatherability as well as chemical resistance, while the vinyl ether segments provide crosslinking sites. LUMIFLON LF-9721 has extremely high hydroxyl functionality and has a high crosslink density after reaction with isocyanates. This resin is useful wherever excellent chemical resistance is required. Typical applications include coatings for aerospace, tank lining, water tanks, and military coatings

AGC Chemicals Americas, Inc. LUMIFLON® LF200 - FEVE Solvent-borne Resin Polyol is a solventborne fluoroethylene vinyl ether resin designed for weather-resistant coatings. It has hydroxyl functionality and can be crosslinked with polyisocyanates. Coatings based on LF200 exhibit high gloss and excellent durability. LF200 is a general purpose resin, used for heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for alternative energy applications.

AGC Chemicals Americas, Inc. LUMIFLON® LF200F - FEVE Resin Polyol is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has both moderate molecular weight and hydroxyl value making it a versatile polyol for various applications. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. LUMIFLON® LF-600X consists of alternating fluoroethylene and alkyl vinyl ether segments (FEVE). The fluorinated segments provide outstanding UV stability, weather resistance, and chemical resistance, while the vinyl ether segments provide solvent compatibility and crosslinking sites. LUMIFLON resins are used to make ultra-weatherable coatings for architectural, aerospace, automotive, and industrial maintenance markets. LUMIFLON LF-600X is a moderate OH number resin. It is typically used to formulate coil coatings where flexibility and excellent weatherability are required. The major market where LF-600X finds application is the architectural market. However, LF-600X is also being used in ambient cure applications where high coating flexibility is required, for example, in coatings for plastics.

AGC Chemicals Americas, Inc. LUMIFLON® LF916F - FEVE Resin Polyol is a fluoroethylene vinyl ether polyol used in applications requiring outstanding exterior durability and excellent chemical resistance. It is formulated into low VOC, 2K crosslinkable coatings. It has a lower molecular weight combined with a high hydroxyl value for formulating highly crosslinked 2K coatings with excellent performance properties. Markets include heavy duty industrial coatings, architectural coatings, aerospace coatings, automotive coatings, and coatings for concrete.

AGC Chemicals Americas, Inc. Fluon® PFA P-65P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for general-purpose extrusion and injection molding and offers better stress crack resistance compared to P-63P.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-2300N is a melt-processable copolymer of tetrafluoroethylene and ethylene. It offers a unique combination of properties such as enhanced resistance to heat and chemical attack, and exceptional physical toughness. Rotational molding and lining grades are formulated as free-flowing powders with specific particle morphologies to uniformly coat complex and challenging parts. It is used in rotational lining of components in the Chemical Process Industry (CPI) for fluid handling such as valves, pumps, pipes, fittings, tanks, and other intricate parts.

AGC Chemicals Americas, Inc. Fluon® PFA P-63P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used in general purpose extrusion and injection molding.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1010 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1010 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE LM-730A is a modified ethylene tetrafluoroethylene (ETFE) polymer. Unlike most other ETFE materials, LM-730A has a lower melting point of 225°C (compared to 260°C for most ETFE), improved chemical resistance and thermal stability, enhanced optical clarity, increased flexibility, and a higher limiting oxygen index of 40% (compared to 31% for most ETFE). It can be processed using conventional extrusion and injection molding techniques and is used for general-purpose extrusion and injection molding applications.

AGC Chemicals Americas, Inc. Fluon® ETFE C-88AXMP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® PFA P-66P is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. It has chemical, electrical, and thermal properties that are similar to polytetrafluoroethylene (PTFE), but can be processed using conventional extrusion, injection molding, blow molding, and transfer molding techniques. This versatile material can withstand a wide range of temperatures (-200°C to 260°C) and is available in the form of 1/8 inch pellets. It is commonly used for extrusion, transfer, compression, and injection molding, and offers the best resistance to stress cracking among the PFA materials.

AGC Chemicals Americas, Inc. Fluon® PTFE CD086E is a white free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. This polymer has a trace quantity of comonomer incorporated in the molecule to modify its crystallinity and the resulting properties. The process of making Fluon® PTFE CD086E does not use ammonium salts of perfluorooctanoic acid (PFOA).

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-1120 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-1120 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon+™ mPPS SB-1030 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPPS SB-1030 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE C-55AXP is a melt-processable copolymer of tetrafluoroethylene and ethylene that offers a unique combination of properties such as high resistance to heat and chemical attack and exceptional physical toughness. It can be processed using conventional methods like extrusion, injection molding, rotomolding, rotolining, and electrostatic coating and is available in the form of 1/8 inch pellets.

AGC Chemicals Americas, Inc. Fluon® PTFE G201C is a virgin sintered granular PTFE homopolymer. It is intended for the extrusion premium quality rods up to approximately 25mm diameter and tubes up to approximately 10mm wall thickness. Resin properties keep the insulation thickness to a minimum while tolerating a wider range of temperatures (-180 °C to 260 °C) than other insulators.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2220 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2220 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE C88AXMP-HT is a high-performance melt-processable copolymer of tetrafluoroethylene and ethylene that is designed for use in automotive applications. It offers improved thermal stability and performs better at higher temperatures than standard ETFE, with a maximum operating temperature of 200ºC. Its enhanced stress crack resistance, abrasion resistance, and mechanical strength make it suitable for ultra-thin layer insulation in vehicles and aircraft where reducing carbon footprint and increasing fuel efficiency is important.

AGC Chemicals Americas, Inc. Fluon+™ mPEEK KB-2020 is a modified PEEK (polyether ether ketone) resin that has been improved using AGC's proprietary fluoropolymer and compounding technology. The modification enhances the impact and wear resistance of the PEEK resin, as well as improves its physical and electrical properties. Fluon+™ mPEEK KB-2020 can be processed using conventional PEEK molding methods such as extrusion or injection molding. Potential applications include hoses or tubes, wire and cable, gears, seals, or other markets that require high temperature and chemical resistance.

AGC Chemicals Americas, Inc. Fluon® ETFE CB-8015X is a compound of ethylene/tetrafluoroethylene copolymer and conductive carbon black. It is used in applications that require a statically conductive polymer with the ability to withstand harsh environments. It is processed using conventional extrusion or injection molding techniques. It is available as a 1/8” pellet.

AGC Chemicals Americas, Inc. Fluon® PTFE CD141E is a white, free-flowing powder made by coagulating an aqueous dispersion of polytetrafluoroethylene. The homopolymer CD141E has a medium molecular weight and is not produced using perfluorooctanoic acid ammonium salts (PFOA). This product has been developed for paste extrusion into tapes, tubes, pipe liners, and coated wires.

AGC Chemicals Americas, Inc. Fluon® PFA P-62XP (perfluoroalkoxy) is a melt-processible copolymer of tetrafluoroethylene and a perfluorinated vinyl ether. Fluon® PFA P-62XP has chemical, electrical, and thermal properties almost identical to its close chemical cousin, polytetrafluoroethylene (PTFE), yet can be processed by conventional extrusion, injection molding, blow molding, and transfer molding techniques. This unique material can be used over a wide range of temperatures (-200°C to 260°C). It is available as a 1/8 inch pellet.