Products

Braskem America

PlasticsProduct Families

Basic Thermoplastics

26 Products found on Braskem America in Plastics

SDSWith SDS

TDSWith TDS

UTEC® 5540

Processing Methods:Extrusion, Compression Molding, Ram Extrusion
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 5540 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 4040

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC®4040 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 3040

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 3040 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 3041

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 3041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America HD3403S

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:4.5 - 4.5 g/10 min

Braskem HD3403S is a high density polyethylene with outstanding organoleptic properties in addition to great processability and high stiffiness.

For more information regarding REACH, please visit Braskem's site

UTEC® 6540G

Processing Methods:Extrusion, Compression Molding, Ram Extrusion
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 6540G is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 6540

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 6540 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 5541

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 5541 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

UTEC® 4041

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 4041 is an ultra high molecular weight polyethylene (UHMWPE) with a molecular weight about 10 times higher than high density polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength, and low coefficient of friction that makes it a self-lubricating material.

UTEC® 6541

Processing Methods:Ram Extrusion, Compression Molding
Polymer Name:Ultra High Molecular Weight Polyethylene (UHMWPE)

Braskem America UTEC® 6541 is an Ultra High Molecular Weight Polyethylene (UHMWPE) with a molecular weight about 10 times higher than High Density Polyethylene (HDPE) resins. This extremely high molecular weight yields several unique properties to this polymer such as high abrasion resistance, impact strength and low coefficient of friction that makes it a self-lubricating material.

For more information regarding REACH, please visit Braskem's site

Braskem America GE7252XP

Polymer Name:High Density Polyethylene (HDPE), Bimodal Polyethylene (Bimodal PE)
Processing Methods:Injection Molding, Compression Molding
Additives Included:Slip Agent
Melt Flow Index:2.0 - 2.0 g/10 min

Braskem GE7252XP is a bimodal high density polyethylene developed for the manufacturing of caps and closures to carbonated soft drinks. This grade offers a good balance between chemical and mechanical resistance and good processability.

For more information regarding REACH, please visit Braskem's site

RPP117 GY2 Recycled Polypropylene

Polymer Name:Polypropylene Copolymer
Labeling Claims:Contains PCR Resin, Recycled, Sustainable, Food Contact Acceptable
Processing Methods:Injection Molding, Compression Molding

Braskem Recycled RPP117 GY2 recycled polypropylene is an eco-conscious option derived from 25% recycled material sourced from post-consumer packaging. This gray polymer is designed for various applications, including cups, containers, closures, and injection-molded packaging. This product is tailored specifically for efficient injection molding processes.

SHC7260

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:7.2 - 7.2 g/10 min

SHC7260 is a high-density polyethylene tailored for injection molding, offering high hardness and stiffness, along with low warpage tendency. This grade's organoleptic properties make it ideal for water caps applications. Notably, it contains a minimum biobased carbon content of 94%, determined according to ASTM D6866.

SLD4004

Polymer Name:Low Density Polyethylene (LDPE)
Processing Methods:Blown Film Extrusion, Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Foam Extrusion, Extrusion, Film Extrusion
Melt Flow Index:2.0 - 2.0 g/10 min

SLD4004 is a low-density polyethylene (LDPE) known for its excellent processability and good mechanical properties. This versatile resin can be utilized in various processing methods, including blow molding, compression molding, extrusion, and foam extrusion. With its low carbon content, SLD4004 aligns with sustainable practices, making it an eco-friendly choice. It excels in producing high-quality films and sheets, offering superior performance as a resin for plastics and elastomers.

For more information regarding REACH, please visit Braskem's site

SHC7260LS-L

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:7.2 - 7.2 g/10 min

SHC7260LS-L is a high-density polyethylene specially developed for injection molding applications. It offers high hardness and stiffness while exhibiting a low tendency to warp. This resin contains additives to protect against the damaging effects of ultraviolet radiation. With a minimum biobased carbon content of 94%, determined by ASTM D6866, this grade aligns with sustainable practices.

For more information regarding REACH, please visit Braskem's site

Braskem America TI4150WR

Polymer Name:Polypropylene Impact Copolymer (ICP)
Processing Methods:Injection Molding, Compounding, Compression Molding
Melt Flow Index:15.0 - 15.0 g/10 min

Braskem TI4150WR Polypropylene Impact Copolymer (ICP) provides very good mold release and very high flexural modulus.

All Braskem America production facilities are certified to produce bio, bio-circular, and circular polypropylene under the ISCC PLUS certification via the mass balance approach.

For more information regarding REACH, please visit Braskem's site

SHA7260

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Fibers Extrusion, Compression Molding, Bicomponent Nonwovens Extrusion
Melt Flow Index:20.0 - 20.0 g/10 min

SHA7260 is a high-density polyethylene specifically designed for injection molding, offering ease of processing and high productivity. This resin exhibits a good melt flow, providing high rigidity and hardness to the molded products. Its narrow molar mass distribution reduces the tendency to warpage. The minimum biobased carbon content of this grade is 94%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGF4960

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4960 is a homopolymer high-density polyethylene designed for the blow-molding segment. This product offers a winning combination of high density, stiffness, and exceptional impact resistance, making it ideal for various applications. With a minimum biobased carbon content of 96% (ASTM D6866), it demonstrates Braskem's commitment to sustainability. SGF4960's versatile properties make it well-suited for use in sports and recreation equipment, food and beverage packaging, and toys, among others. Its low carbon content further adds to its appeal as an eco-friendly choice.

For more information regarding REACH, please visit Braskem's site

SHE150

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Blown Film Extrusion, Cast Film Extrusion, Fibers Extrusion, Compression Molding, Monofilament Extrusion, Extrusion, Film Extrusion
Additives Included:Antioxidant, Processing Aid
Melt Flow Index:1.0 - 1.0 g/10 min

SHE150 resin is a High Density Polyethylene (HDPE) specifically designed for the monofilament extrusion process. It offers a well-balanced combination of processability, spinnability, and knotting strength, while maintaining minimal gels. Additionally, it contains processing aid and oxidant additives. This grade has a minimum biobased carbon content of 94%, as determined by ASTM D6866. The resin can also be blended with LLDPE to enhance the stiffness of blown films.

For more information regarding REACH, please visit Braskem's site

SVT2180

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Compression Molding, Injection Molding
Additives Included:Antioxidant
End Uses:Foams, Toys, Unisole, Sporting Goods, Shoe Sole, Plates, Midsole
Melt Flow Index:2.1 - 2.1 g/10 min

Braskem America SVT2180 is a copolymer of renewable ethylene with Vinyl Acetate (EVA) mainly used for the production of crosslinked foam sheets and other parts. It is a product with easy processability and high compatibility with mineral fillers, thermoplastics, and elastomeric resins. Other important characteristics are elasticity, flexibility, excellent stress cracking resistance (ESCR), chemical resistance, and low temperature strength. The exclusive morphologic characteristics give outstanding crosslinkability. The components produced with SVT2180 have the following properties: low weight, resistance to deformation, low shrinkage, high capacity of shrinkage, and color retention. The minimum biobased carbon content of this grade is 80%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGF4950TT

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Compression Molding, Blow Molding, Extrusion Blow Molding (EBM)
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4950TT is a copolymer high-density polyethylene specifically designed for the blow-molding segment. It does not contain optical brightener in its composition. This grade offers a well-balanced combination of impact and stiffness properties, along with high environmental stress cracking resistance and excellent processability. It has a minimum biobased carbon content of 96%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SHD7255LS-L

Polymer Name:High Density Polyethylene (HDPE) Compound, High Density Polyethylene (HDPE)
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:4.5 - 4.5 g/10 min

SHD7255LS-L is a high-density polyethylene specially designed for injection molding applications. It offers a combination of good tenacity, impact properties, and stiffness. The resin's unique ratio between melt flow and density contributes to excellent mechanical properties. Additionally, this product contains additives that protect against the action of ultraviolet radiation. With a minimum biobased carbon content of 94%, determined according to ASTM D6866, it is an environmentally friendly choice for various molding needs.

For more information regarding REACH, please visit Braskem's site

SGF4950

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Extrusion Blow Molding (EBM), Compression Molding, Blow Molding, Extrusion, Tubing Extrusion, Profile Extrusion
Melt Flow Index:28.0 - 28.0 g/10 min

SGF4950 is a high-density polyethylene copolymer, designed for the blow-molding segment. It exhibits a well-balanced combination of impact strength, stiffness, and environmental stress cracking resistance, while ensuring excellent processability. This grade contains a minimum biobased carbon content of 96%, determined according to ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGF4950HS

Polymer Name:High Density Polyethylene (HDPE)
Processing Methods:Tubing Extrusion, Extrusion Blow Molding (EBM), Compression Molding, Blow Molding
Melt Flow Index:20.0 - 20.0 g/10 min

SGF4950HS is a High Density Polyethylene copolymer that provides a remarkable combination of good processability and excellent stress cracking resistance (ESCR). It is highly recommended for manufacturing containers, flasks, and bottles up to 30 liters for transporting chemical products. This grade has a minimum biobased carbon content of 95%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SGE7252NS

Polymer Name:Bimodal HDPE
Processing Methods:Injection Molding, Compression Molding
Melt Flow Index:2.0 - 2.0 g/10 min

SGE7252NS is a bimodal high density polyethylene designed specifically for manufacturing caps and closures for carbonated soft drinks. This grade offers a well-balanced combination of chemical and mechanical resistance, along with good processability. It contains a minimum biobased content of 96%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site

SVT2145R

Polymer Name:Ethylene Vinyl Acetate Copolymer (EVA)
Processing Methods:Compression Molding, Rotational Molding, Extrusion, Injection Molding
End Uses:Profiles, Automotive Components
Melt Flow Index:2.1 - 2.1 g/10 min

Braskem America SVT2145R is an ethylene-vinyl acetate copolymer-based resin that offers easy crosslinking and high compatibility with other thermoplastic resins, inorganic fillers, and pigments. Compositions with SVT2145R exhibit remarkable flexibility and fatigue resistance. When cross-linked, the compound demonstrates exceptional abrasion resistance and a high friction coefficient. This grade contains a minimum biobased carbon content of 45%, as determined by ASTM D6866.

For more information regarding REACH, please visit Braskem's site