Products

CHT Group

AdditivesProduct Families

Surface Modifiers

Foam Control

Rheology Modifiers & Stabilizers

Dispersing & Wetting Additives

Functional Additives

42 Products found on CHT Group in Additives

SDSWith SDS

TDSWith TDS

ULTRALUBE® GA 1046

Functions:Surface Modifier
Chemical Family:Polyethylene Waxes, Polyolefins, Waxes
End Uses:Waterborne Coating, Varnishes
Features:Good Antiblocking Properties, Abrasion Resistance, High Gloss

ULTRALUBE® GA 1046 is a silicone/PE-type, fine particle sized wax dispersion used to improve surface qualities. This product is amine-free, has anti-blocking properties, and is suitable for indirect and direct food contact. It is especially recommended for overprint varnishes (OPV).

AGOCEL® AC 1155

Chemical Family:Polygalactomannan Ethers, Guar & Derivatives, Gums & Hydrocolloids
Functions:Viscosity Modifier, Rheology Modifier
End Uses:Powder Coating, Tile Adhesive, Waterborne Coating
Labeling Claims:Environmentally Friendly
Physical Form:Powder

AGOCEL® AC 1155 is a polygalactomannan ether used as a hydrocolloid for water-based paints and synthetic resin plasters. Belonging to the AGOCEL® product portfolio, this product is not only added to adjust the viscosity to meet processing requirements and specifications but also to influence essential properties such as storage stability and good anti-settling behavior.

VARIPHOB® AC 2530

Chemical Family:Siloxanes
Functions:Water Repellent
End Uses:Waterborne Coating
Compatible Polymers & Resins:Silicones
Labeling Claims:Cyclic silicone-free, Environmentally Friendly
Features:High Durability, Water Resistance, Good Film Former, Dirt Pickup Resistance, Good Beading Effect

VARIPHOB® AC 2530 is an aqueous emulsion of silicone resin used as a water-repelling agent for aqueous coating systems. This product has an improved beading effect and resistance to water. It belongs to the VARIPHOB® product portfolio and guarantees long-lasting and environmentally friendly protection.

VARIPHOB® AC 2530 is:

BIT free
CIT free
MIT free
Flourine-free
Free from silicone cycles (D4/D5/D6)
Free from organic solvents

CHT Group TA-116

Functions:Anti-Foaming Agent, Defoamer
Chemical Family:Silicones
Labeling Claims:Halal, Kosher
Certifications & Compliance:Kosher, Halal

CHT Group TA-116 is a water dispersible 50% active silicone industrial defoamer with excellent foam knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Detergents Laundry applications Coatings Waste Water treatment Oil and gas processing Pulp and paper Grinding applications

ULTRALUBE® GA 1803

Functions:Surface Modifier
Chemical Family:Polyethylene Waxes, Polyolefins, Waxes
End Uses:Varnishes, Flexography Ink, Waterborne Coating
Labeling Claims:Food Contact Acceptable
Features:Improved Slip, Good Antiblocking Properties, Food Contact Acceptable, Abrasion Resistance, Matting

ULTRALUBE® GA 1803 is an HDPE-type wax dispersion used to improve surface qualities. This product is amine-free, provides maximum abrasion resistance, and is suitable for indirect and direct food contact. It is especially recommended for water-based printing inks with direct food contact.

ULTRALUBE® GA 5670

Functions:Surface Modifier
End Uses:Waterborne Ink, Waterborne Coating, Varnishes
Features:High Gloss, Slip Resistance

ULTRALUBE® GA 5670 is an EVAC/PE-type, fine particle sized wax dispersion used to improve surface qualities. It has anti-slip properties and the best price-performance ratio. This product is suitable for hard resins and is especially recommended for water-based printing inks and overprint varnishes.

CHT Group DF-758

Chemical Family:Silicones
Functions:Anti-Foaming Agent
Labeling Claims:Organic
Features:Low Foaming, Defoaming, Excellent Stability, Good Lubricating Properties

CHT Group DF-758 is a 45% active silicone antifoam emulsion that is formulated to control foam in a wide variety of industrial applications. It was designed as a glass grinding aid to facilitate defect-free glass polishing. This product is ideal when low foam and excellent lubricity are needed.

SILCO® GA 5157

Functions:Leveling Agent
Chemical Family:Silicones
End Uses:Varnishes
Labeling Claims:Low Cyclic Silicones, VOC-free
Features:Excellent Scratch Resistance, Good Leveling, Low Foaming, High Gloss, Improved Slip

SILCO® GA 5157 is a highly effective leveling and surface additive that improves slip, leveling, and scratch resistance. This organomodified polysiloxane is particularly recommended for water and solvent-based formulations. The preferred fields of application include: Printing inks and overprint varnishes Water-based systems UV systems

SILCO® GA 2550

Functions:Wetting Agent, Surfactant
End Uses:Varnishes
Labeling Claims:VOC-free, Silicone-free, APEO-Free, Mineral oil-free

SILCO® GA 2550 is a polymeric silicone-free substrate wetting additive. Due to its chemical structure, it is particularly recommended for water-based formulations. This product is particularly characterized as a highly effective wetting additive for printing inks and overprint varnishes and is compliant with all relevant FDA regulations and Nestlé guidance.

SILCO® GA 2550 is:

APEO-free
Biocide-free
Suitable for food contact applications (eg Swiss Ordinance, BfR, FDA, Chinese GB)
Suitable for aqueous systems
Non-ionic
Low foaming
Silicone-free
Free from volatile organic compounds (VOC)

VARIPHOB® AC 1120

Chemical Family:Siloxanes
Functions:Water Repellent
End Uses:Waterborne Coating
Compatible Polymers & Resins:Silicones
Labeling Claims:Cyclic silicone-free, Environmentally Friendly, MIT-free
Features:High Durability, Water Resistance, Good Film Former, Dirt Pickup Resistance, Good Beading Effect

VARIPHOB® AC 1120 is an aqueous emulsion of a cross-linkable polysiloxane used as a water-repelling agent for aqueous coating systems. This product has an improved beading effect and resistance to water. Belonging to the VARIPHOB® product portfolio, this product guarantees long-lasting and environment-friendly protection.

ULTRALUBE® GA 2000

Functions:Surface Modifier
End Uses:Waterborne Ink, Waterborne Coating, Varnishes
Features:Good Antiblocking Properties, Abrasion Resistance, Excellent Scratch Resistance, High Gloss, Improved Slip

ULTRALUBE® GA 2000 is a solvent-free, HDPE-type wax dispersion used to improve surface qualities, including:

Increases the scratch resistance
Increases the slip of the surface
Abrasion resistance
Mechanical strength

It has the best price-performance ratio, good abrasion resistance, and is suitable for indirect food contact. This product is especially recommended for water-based printing inks and overprint varnishes. Properties include:

Anionic
APEO-free
Emulsion
Formaldehyde-free
Suited for topcoats
Suited for UV-crosslinking systems
Hard film
Solvent-free

SILCO® GA 1011

Functions:Wetting Agent, Dispersant
End Uses:Varnishes
Compatible Polymers & Resins:Styrene Acrylics
Labeling Claims:VOC-free, APEO-Free, Mineral oil-free

SILCO® GA 1011 is a hydroxy-functional block copolymer in water. Due to its chemical structure, SILCO® GA 1011 is particularly recommended as a wetting and dispersing additive for organic pigments and carbon black. The preferred fields of application include: Printing inks Water-based systems

ULTRALUBE® GA 6668

Functions:Surface Modifier
Chemical Family:Polyolefins, Waxes, Polypropylene Waxes, Polypropylenes (PP)
End Uses:Waterborne Coating, Varnishes
Features:Slip Resistance, High Gloss

ULTRALUBE® GA 6668 is a PP-type, fine particle sized wax dispersion used to improve surface qualities. It has anti-slip properties, improves adhesion, and has the best price-performance ratio. This product is suitable for soft resins and is especially recommended for water-based overprint varnishes.

ULTRALUBE® GA 6668 is:

Anionic
APEO-free
Formaldehyde-free
Suitable for surface treatments
Suited for topcoats
Suited for UV-crosslinking systems
Anti-slip

CHT Group TA antifoam series

Functions:Anti-Foaming Agent, Defoamer
Chemical Family:Silicones
Labeling Claims:Alkylphenol-free, Formaldehyde-free
Features:Easy Handling
End Uses:Oil & Gas Applications

CHT Group TA antifoam series products are water-dispersible, active silicone defoamers that are formulated to control foam in various industrial processes. These products have excellent foam knockdown and persistence. They work effectively even at low concentrations and in both hot and cold systems.

CHT Group XAF-102

Chemical Family:Silicones
Functions:Recycling Additive, Defoamer
Labeling Claims:Alkylphenol-free, Water-free, Formaldehyde-free
Compatible Polymers & Resins:Silicones
Features:High Performance, Ease of Handling, Dispersible, High Temperature Strength, Cost Effective, Wide pH Range

CHT Group XAF-102 is a 100% active, self-dispersing antifoam compound. It is formulated for specialized applications that require a high-active solution to combat high pH foaming systems. Belonging to the XAF series, this product provides outstanding performance in extreme environments.

SILCO® GA 1018

Functions:Wetting Agent, Dispersant
End Uses:Varnishes
Labeling Claims:APEO-Free, Mineral oil-free

SILCO® GA 1018 is a wetting and dispersing additive for resin-free and resin-containing formulations, used in combination with a second anionic compound. Due to its chemical structure, it is particularly recommended for all organic pigments. The preferred fields of application include: Printing inks Water-based systems

CHT Group XAF-101

Chemical Family:Silicones
Functions:Defoamer
End Uses:Oil & Gas Applications, Paper & Pulp

CHT Group XAF-101 is an extreme-performance polymer blend with 100% active content. This foam management solution has excellent knockdown and persistence. It works effectively even at low concentrations and in both hot and cold systems. Applications Coatings Wastewater treatment Oil and gas processing Pulp and paper Grinding applications

VARIPHOB® AC 1104

Chemical Family:Siloxanes
Functions:Water Repellent
End Uses:Waterborne Coating
Compatible Polymers & Resins:Silicones
Labeling Claims:Cyclic silicone-free, Environmentally Friendly, MIT-free
Features:Water Resistance, Dirt Pickup Resistance, Good Beading Effect

VARIPHOB® AC 1104 is an aqueous emulsion of a polysiloxane used as a water-repelling agent for aqueous coating systems. This product has an improved beading effect and resistance to water. Belonging to the VARIPHOB® product portfolio, this product guarantees long-lasting and environment-friendly protection.

ULTRALUBE® GA 1806

Functions:Surface Modifier
Chemical Family:Polyethylene Waxes, Polyolefins, Waxes
End Uses:Flexography Ink, Waterborne Coating, Varnishes
Features:Good Antiblocking Properties, Abrasion Resistance, Matting, Improved Slip

ULTRALUBE® GA 1806 is an aqueous HDPE-type wax dispersion used to improve surface qualities, including:

Abrasion resistance
Mechanical strength
Scratch resistance
Surface slip

ULTRALUBE® GA 1806 is APEO- and formaldehyde-free. It is FDA-approved, anionic, and free from organic solvents. It is suited for topcoats and UV-crosslinking systems.

ULTRALUBE® GA 1806 is suitable for indirect food contact. It is especially recommended for water-based printing inks.

CHT Group DF-255

Chemical Family:Silicones
Functions:Anti-Foaming Agent, Defoamer
Labeling Claims:Organic
Features:Good Lubricating Properties
End Uses:Paper & Pulp

CHT Group DF-255 is an organic defoamer with 100% active content. This product provides excellent lubricity in industrial applications. Applications Pulp and paper Grinding applications Fermentation Distillation Latex Adhesives

ULTRALUBE® GA 1017

Functions:Surface Modifier
Chemical Family:Polyethylene Waxes, Polyolefins, Waxes
End Uses:Varnishes, Waterborne Coating
Labeling Claims:Food Contact Acceptable
Features:Improved Slip, Good Antiblocking Properties, Food Contact Acceptable, Abrasion Resistance, Excellent Scratch Resistance

ULTRALUBE® GA 1017 is an HDPE dispersion of fine particle-sized wax used to enhance optical and physical properties. This product is amine-free, and it possesses good abrasion resistance, which makes it suitable for both indirect and direct food contact. It is particularly recommended for water-based overprint varnishes with direct food contact.

ULTRALUBE® GA 1017 is:

Suitable for food contact applications such as Swiss Ordinance, BfR, FDA, and Chinese GB
Highly abrasion-resistant
Solvent-free
Non-ionic
Free from volatile organic compounds (VOCs)

AGOCEL® AC 5500

Chemical Family:Polysaccharides
Functions:Stabilizer, Thickener, Rheology Modifier
Compatible Polymers & Resins:Silicones
Physical Form:Powder
Features:Microbe Resistant, Excellent Pseudoplasticity, Good Thermal Stability, High Viscosity

AGOCEL® AC 5500 is a modified heteropolysaccharide for use as a stabilizer and rheological additive for aqueous or mineral-building material systems. Belonging to the AGOCEL® product portfolio, this product is not only added to adjust the viscosity to meet processing requirements and specifications but also to influence essential properties such as storage stability and good anti-settling behavior.

AGOCEL® AC 1147

Chemical Family:Guar & Derivatives, Non-Ionics
Functions:Rheology Modifier
End Uses:Latex
Compatible Polymers & Resins:Polyvinyl Acetate (PVA), Styrene Acrylics
Physical Form:Powder

AGOCEL® AC 1147 is a hydrophobically modified guar gum used as a rheology additive for architectural latex-based paints. Belonging to the AGOCEL® product portfolio, this product is not only added to adjust the viscosity to meet processing requirements and specifications but also to influence essential properties such as storage stability and good anti-settling behavior.

ULTRALUBE® GA 2300

Functions:Surface Modifier
End Uses:Waterborne Ink
Labeling Claims:Food Contact Acceptable
Features:Improved Slip, Good Antiblocking Properties, Food Contact Acceptable, Abrasion Resistance, Excellent Scratch Resistance, High Gloss

ULTRALUBE® GA 2300 is an HDPE wax microdispersion used to improve surface qualities. It is amine-free, has good abrasion resistance, and is suitable for indirect and direct food contact. This product is especially recommended for water-based printing inks with direct food contact.

AGOCEL® AC 5600

Functions:Rheology Modifier, Stabilizer, Anti-Settling Agent
Labeling Claims:Preservative-free
Physical Form:Powder
Features:Good Lubricating Properties, Microbe Resistant, Excellent Pseudoplasticity, Good Thermal Stability, Excellent Stability

AGOCEL® AC 5600 is a heteropolysaccharide used as a stabilizer and rheological additive for silicate-based painting systems. Belonging to the AGOCEL® product portfolio, this product is not only added to adjust the viscosity to meet processing requirements and specifications but also to influence essential properties such as storage stability and good anti-settling behavior.

VARIPHOB® AC 2552

Chemical Family:Siloxanes
Functions:Water Repellent
End Uses:Waterborne Coating
Compatible Polymers & Resins:Silicones
Labeling Claims:Cyclic silicone-free, Environmentally Friendly
Features:High Durability, Water Resistance, Good Film Former, Dirt Pickup Resistance, Good Beading Effect

VARIPHOB® AC 2552 is an aqueous emulsion of reactive, modified polysiloxane used as a water-repelling agent for aqueous coating systems. This product has improved water resistance and vapor permeability. It belongs to the VARIPHOB® product portfolio and guarantees long-lasting and environmentally friendly protection.

VARIPHOB® AC 2552 is:

BIT free
CIT free
MIT free
Flourine-free
Free from silicone cycles (D4/D5/D6)

ICM 3125 FG

Functions:Anti-Marring Agent
End Uses:Waterborne Ink, Waterborne Coating
Labeling Claims:PFAS-Free, Formaldehyde-free, PFOA-free, Alkylphenol-free
Features:Excellent Freeze/Thaw Stability, Excellent Stability, Improved Slip

ICM 3125 FG is a 42% active food-grade emulsion with 12,500 cSt. This product has less grease bleed through, smoother feel, and finished texture. It improves roller slip and is ideal for mar resistance in aqueous inks and coatings on paper packaging.

SILCO® GA 5143

Functions:Leveling Agent
Chemical Family:Siloxanes
End Uses:Solventless & High Solids Coating, Waterborne Ink, Waterborne Coating, Varnishes
Labeling Claims:VOC-free
Features:Mar Resistance, Slip Resistance, Good Leveling, Friction Resistance, Good Wettability

SILCO® GA 5143 is an 80% active non-ionic emulsion of extremely high molecular weight polydimethylsiloxane. This emulsion is completely VOC-free and specially developed to provide slip and mar resistance in water-borne systems. It reduces the coefficient of friction, provides antilocking, and imparts leveling and wetting.

VARIPHOB® AC 5002

Chemical Family:Silicones
Functions:Water Repellent
Labeling Claims:Environmentally Friendly
Physical Form:Powder
Features:Alkali Resistant, Alkali Resistance, Better Flowability, Excellent Flow

VARIPHOB® AC 5002 is a silicone-based hydrophobic powder used as a water-repelling agent for the protection of mineral-based construction materials. This product is used for cement-based systems, such as bathrooms, swimming pools, showers, saunas, wellness areas.

VARIPHOB® AC 5002 is particularly well-suited for construction materials such as:

Mineral mortars / Grouts
Plasters
Renders
Concrete
Joint fillers
Sealing mortars
Levelling compounds
Skim Coats
Stucco

It increases durability by reducing water absorption, and increases surface hydrophobicity of the materials used. This product also provides full breathability so that water vapor can easily evaporate.

VARIPHOB® AC 6341

Chemical Family:Anionics, Paraffin Waxes
Functions:Water Repellent
End Uses:Waterborne Coating
Labeling Claims:Cyclic silicone-free, Environmentally Friendly
Features:Alkali Resistance, High Durability, Water Resistance, Dirt Pickup Resistance

VARIPHOB® AC 6341 is an aqueous emulsion of paraffin wax used as a water-repelling agent for aqueous coating systems. This product improves water resistance and strongly reduces dirt pick-up. It belongs to the VARIPHOB® product portfolio and guarantees long-lasting and environmentally friendly protection.

VARIPHOB® AC 3030

Chemical Family:Siloxanes
Functions:Water Repellent
End Uses:Waterborne Coating
Compatible Polymers & Resins:Silicones
Labeling Claims:Cyclic silicone-free, Environmentally Friendly
Features:High Durability, Water Resistance, Good Film Former, Dirt Pickup Resistance, Good Beading Effect

VARIPHOB® AC 3030 is an aqueous emulsion of reactive, modified polysiloxane used as a water-repelling agent for aqueous coating systems. This product has improved water resistance and vapor permeability. It belongs to the VARIPHOB® product portfolio and guarantees long-lasting and environmentally friendly protection.

VARIPHOB® AC 3030 is: