Knowde Enhanced TDS
Identification & Functionality
- Product Type
- Technologies
- Product Families
Features & Benefits
Applications & Uses
- Applications
- Application Area
- Procedure for Applying
1. As with all adhesive bonds, surface preparation is a vital part of the process. Carefully clean both surfaces to be bonded with MEK if possible. If MEK is not compatible with the surfaces to be bonded, another suitable solvent may be used.
2. Allow cleaned surfaces to dry completely.
3. Die cut 126-22-F to the of the size of interface area, remove one of the protective liners, position onto one of the surfaces to be bonded, and warm the substrate/adhesive to 100°C.
4. By applying pressure, laminate the film/adhesive to the substrate smoothing out any trapped air. Allow to cool to room temperature and peel off the other release liner.
5. Position the other substrate and apply a clamp to provide constant pressure.
6. Cure for 10 minutes at 170°C.
7. Remove pressure. Part is ready for use.
Properties
- Typical Cured Properties
Value | Units | Test Method / Conditions | |
Volume Resistivity (9-cm) (X, Y Axis) | 1x10^12 | — | — |
Volume Resistivity (9-cm) (Z Axis) | 0.0001 | — | — |
Hydrolytic Stability | Excellent | — | — |
Useful Temperature Range | 55 to 200 | ºC | — |
Thermal Stability | Good to 250 | °C | — |
Regulatory & Compliance
- Certifications & Compliance
Technical Details & Test Data
- General Film Description
Product Code Adhesive Thickness (mils)
126-22-F1 1 126-22-F2 2 126-22-F3 3 126-22-F4 4 126-22-F5 5 Substrate Type: Release coated PET
Conductive Coating Type: Silver/Polymer
Storage & Handling
- Shelf Life
- 12 months at -10°C, 2 weeks at 25°C
- Storage
Shelf life: 2 weeks at 25°C, 12 months at -10°C.
- Storage and Handling
Use with adequate ventilation. Keep away from sparks and open flames. Avoid prolonged contact with skin and breathing of vapors. Wash with soap and water to remove from skin