Products

AFCONA 7201 is recommended for unsaturated polyester, PVC, epoxy, and polyurethane resin systems. It is a moderately strong defoamer, but is not suitable for unpigmented/clear systems, as it may cause in-can haziness. However, this has a negligible effect on final gloss and will not influence other properties of the system.

ACCESS® SFR OH 50,000 is a hydroxyl or silanol functional fluid with a high viscosity of 50,000 cP. This pure fluid is ideal for use as an Anti-Structuring additive in high consistency silicone rubber and for the treatment of fillers. ACCESS® SFR OH 50,000 has excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ.

ACCESS® SFR MOH 100 is a high-performance, intumescent coating solution that provides superior fire protection for a wide range of structural steel applications. With its advanced formula, this coating is designed to expand and form a thick, insulating char layer that helps to prevent steel from reaching critical temperatures in the event of a fire. ACCESS® SFR MOH 100 is also highly customizable, offering a range of colors and application methods to meet specific customer requirements.

ACCESS® SFR MOH 1,000 is a silicone-free defoamer offered by Access Rudolf that is designed to eliminate foam in various industrial processes. This product can be used in a wide range of applications, including inks, coatings, adhesives, and textile processing. ACCESS® SFR MOH 1,000 is highly effective at reducing foam formation and improving the efficiency and quality of your industrial processes.

AFCONA 7370 is a polyacrylate surface modifier with anti-foam and leveling properties. It is recommended for unsaturated polyester, PVC, epoxy, and polyurethane resin systems. This grade has a high reactivity to the air interface. It will migrate evenly to the surface to provide good leveling and anti-foam properties. In pigmented system, AFCONA 7370 will provide an even surface tension gradient that results in anti-floating and anti-flooding.

AFCONA 7375US is a modified fluorocarbon polyacrylate surface modifier with anti-foam and leveling properties. Higher fluorocarbon modification than AFCONA 7371. It is recommended for unsaturated polyester, PVC, epoxy, and polyurethane resin systems. With the higher fluorocarbon modification, AFCONA 7375US is excellent in surface tension related performance, such as anti- cratering, fiber wetting, pigment and extender wetting and faster leveling.

Jetfine® 1H-HC is a high-brightness, high-purity, platy, submicron talc that is recommended for films and thin-gage polymer applications, as well as for polymer nucleation. The high brightness and macro-lamellar morphology of Jetfine® 1H improve the film's optical properties, reducing haze and increasing clarity. Jetfine® 1H could also be used for the reinforcement of plastics and to enhance HDT and dimensional stability.

ACCESS® SFR OH 14,000 is a polyether-based superplasticizer designed to improve the workability and flow of concrete mixtures. This product is specifically formulated to reduce the water-to-cement ratio, resulting in improved compressive strength and durability of the final product. By increasing the fluidity of the mixture, ACCESS® SFR OH 14,000 also helps to reduce the risk of cracking and segregation in the concrete.

Cimpact® 710HS is a high-brightness, high-purity, very platy, ultrafine talc with excellent top-size control that has been surface treated to provide extended thermal and UV stability, optimum odor control, improved dispersion, and color matching along with excellent stiffness, HDT, dimensional stability, impact strength, and esthetics in high-performance plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

Crys-Talc® 7H-7HC is a high-brightness, ultrafine, micro-lamellar talc that is recommended for nucleation of polymers and for film and thin-gage polymer applications. It significantly increases the crystallization temperature of semicrystalline polymers, including polyolefins, polyamides, and polyesters. Crys-Talc® 7H also enhances the stiffness, HDT, and dimensional stability of polymer compounds. The high brightness and micro-crystallinity of the talc ore used make Crys-Talc® 7H ideal for film or thin sheet applications that require optimum optical properties, e.g., high clarity and low haze. Crys-Talc® 7HC is the compacted form of Crys-Talc® 7H and is recommended for maximum extruder throughput, minimum dust, and improved dispersion.

AFCONA 7476 is a dispersant with high affinity for acidic and neutral carbon blacks, fiberglass, and other pigments. It is suitable as a dispersing agent for unsaturated polyesters (SMC, BMC, TMC, and pigment concentrates), PVC, epoxies, and polyurethane foams, providing excellent wetting to the glassfiber for faster wetting of resin to the fiberglass and better bond strength and performance in the final product. It is suitable for all types of pigments, from inorganic to organic, as well as carbon black.

AFCONA 7204 is recommended for use in unsaturated polyester, PVC, epoxy, and polyurethane resin systems. It has strong defoaming properties without causing haziness. It is especially suitable for transparent applications, and is a great choice for resin manufacturers. It has very good compatibility with resin.

Cytron TBC is a non-toxic plasticizer widely used in PVC and cellulose derivatives. It can be applied in food-contact materials, such as plastic wrap, containers, films, or printing inks. It is a safe alternative to plasticizers in children's toys and medical devices, such as tubing, gloves, bandages, and patches. It can also be used as an emollient for personal care products.

ACCESS® SFR OH 30 is a highly effective defoamer designed to control foam in a wide range of industrial processes. This product is specifically formulated to provide superior foam control, making it ideal for use in applications such as coatings, adhesives, and other industrial processes where foam can be a problem. ACCESS® SFR OH 30 is easy to handle and apply, with low dosage rates required to achieve the desired results.

Cimpact® 699 is an off-white, high-purity, platy, ultrafine talc with excellent top-size control. It is recommended for efficient crystal nucleation, as well as very good stiffness, HDT, dimensional stability, improved impact strength, and esthetics in high-performance plastics and plastic films.

AFCONA 7203 is mainly recommended for unsaturated polyester and PMMA systems, but is not recommended for unpigmented/clear systems. Adding AFCONA 7203 to the resin may cause in-can haziness, though this has a negligible effect on final gloss and will not influence other properties of the system.

AFCONA 7565 is a polymer with hydroxyl and acidic functionalities that provide interphase affinity properties. It is a polymer that consists of hydroxyl and acidic functionality that give interphase affinity properties. Designed as a dispersing agent as well as an internal mold release agent.

ACCESS® SFR OH 300,000 is a highly effective antifoam agent offered by Access Rudolf that is designed to control foam in various industrial processes. This product is specifically formulated to provide excellent foam control and stability, making it perfect for use in coatings, adhesives, and other industrial applications. ACCESS® SFR OH 300,000 is easy to handle and apply, with low dosage rates required to achieve the desired results.

AFCONA 7375 is a modified fluorocarbon polyacrylate surface modifier with anti-foaming and leveling properties. It is more highly fluorocarbon modified than AFCONA 7371 and is recommended for use in unsaturated polyester, PVC, epoxy, and polyurethane resin systems. It has high reactivity to the air interface, allowing it to migrate evenly to the surface to provide good leveling and anti-foaming properties.

AFCONA 7371 is a modified fluorocarbon polyacrylate surface modifier with anti-foam and leveling properties, as well as better glassfiber wetting than AFCONA 7370. It is suitable for use in unsaturated polyester, PVC, epoxy, and polyurethane resin systems, and is highly reactive to the air interface. This modifier evenly migrates to the surface, providing good leveling and anti-foam properties.

Cimpact® 610-610C is a high-brightness, high-purity, very platy, very fine talc that is recommended for excellent stiffness, HDT, and dimensional stability, as well as improved impact strength and esthetics in high-performance plastics, foamed plastics, and plastic films. It is available in compacted form (Cimpact® 610C) for maximum extruder throughput, minimum dust, and improved dispersion.

AFCONA 7200 is recommended for unsaturated polyester, PVC, epoxy, and polyurethane resin systems. However, it is not suitable for unpigmented/clear systems as it may cause in-can haziness, which can have a negligible effect on final gloss but will not influence other properties of the system.

Crys-Talc® 1H-1HC is a high-brightness, ultrafine, micro-lamellar talc that is recommended for the nucleation of polymers and for film and thin-gage polymer applications. It significantly increases the crystallization temperature of semicrystalline polymers, including polyolefins, polyamides, and polyesters. Crys-Talc® 1H also enhances the stiffness, HDT, and dimensional stability of polymer compounds. The high brightness and micro-crystallinity of the talc ore used make Crys-Talc® 1H ideal for film or thin sheet applications that require optimum optical properties, e.g., high clarity and low haze. Crys-Talc® 1HC is the compacted form of Crys-Talc® 1H and is recommended for maximum extruder throughput, minimum dust, and improved dispersion.

ACCESS® SFR MOH 50,000 is a high-performance silicone-based defoamer offered by Access Rudolf. This product is specifically designed to reduce and eliminate foam formation in a variety of industrial applications. With its excellent foam control properties, ACCESS® SFR MOH 50,000 can help improve the efficiency and quality of your industrial processes.

JetFil® V700C is an off-white, high-purity, extremely platy, ultrafine talc with excellent top-size control that is recommended for excellent stiffness, HDT and dimensional stability, impact strength, and esthetics in high-performance plastics. It is also ideal for the nucleation of semi-crystalline plastics, plastic films, and foamed plastics. It is compacted for maximum extruder throughput, minimum dust, and improved dispersion.

AFCONA 7466 is a highly functional polymer containing carboxylic acids, providing excellent anti-settling, anti-floating, and anti-flooding properties. It also effectively stabilizes compounds containing color pigments and extenders, and, when combined with a suitable rheology agent, it can further enhance its anti-settling capabilities.

AFCONA 7472 is a polymer with high pigment affinity, making it ideal for use as an anti-separation agent between different polymers such as PS (polystyrene) and/or SBS (styrene butadiene rubber) and the unsaturated polyester binder in SMC, BMC, and TMC systems. It can also be used as a wetting and dispersing agent for extenders and pigments.

ACCESS® SFR OH 80,000 is a high-viscosity hydroxyl functional fluid from the ACCESS® OH Polymer series. It is an effective Anti-Structuring additive in high consistency silicone rubber and silicone Room Temperature Vulcanizing (RTV) formulations. It can also be used as a reactive diluent for high viscosity polymers to adjust the overall viscosity of the formulation. ACCESS® SFR OH 80,000 has excellent stability and can be used with catalytic amounts of ammonium carbonate to treat reinforcing fillers in-situ. It is a pure product that does not contain any plasticizers or additives.

AFCONA 7202 is mainly recommended for UPE resin systems. It is considered to be a moderately strong defoamer, so it is not suitable for unpigmented or clear systems. Adding AFCONA - 7202 to resin may result in in-can haziness, but this will have a minimal effect on the final gloss and will not affect the other properties of the system.

ACCESS® SFR OH 3,500 is a reactive silicone fluid that is designed to improve the performance of a wide range of industrial coatings and adhesives. This product is especially effective in applications where high-performance is required, such as in the automotive and aerospace industries. Its unique properties enable it to improve adhesion, reduce surface tension, and enhance the mechanical properties of coatings and adhesives.

AFCONA 7530 is specifically designed for rheology control and is recommended for use in unsaturated polyester, PVC, epoxy, and flexible PU compounding applications. It contains hydroxyl, carboxylic, amine and amide groups, which form a hydrogen bonding network that leads to improved rheology control.

AFCONA 8203 is a defoamer and air-releaser specially developed for unsaturated polyester, polyurethane, and epoxy resin systems. It provides good defoaming properties to the system while maintaining the system's transparency and clarity, making it an ideal alternative to AFCONA 2720 for high-solid application systems such as UPE, epoxy, and polyurethane.

ACCESS® SFR OH 40 is a high-performance intumescent coating solution designed to provide superior fire protection for structural steel applications. Its advanced formula expands and forms a thick, insulating char layer that helps prevent steel from reaching critical temperatures during a fire, providing excellent protection for people and property. ACCESS® SFR OH 40 is highly customizable, offering a range of colors and application methods to meet specific customer requirements. Whether you need to protect steel beams, columns, or other structural elements, ACCESS® SFR OH 40 is the perfect choice for ensuring maximum fire protection and safety.

AFCONA 7206 can efficiently destroy foams on surfaces or in solutions, while also improving the compactness of product surface film and enhancing its weather and chemical resistance, as well as its esthetics. It is widely used in unsaturated polyester, polyacrylate, polyurethane, and epoxy systems.

AFCONA 7480 is a high molecular weight polymer with high pigment affinity, recommended for use in unsaturated polyester, PVC, epoxy, and polyurethane resin systems. It is mainly used as a wetting and dispersing agent, anti-settling agent, to prevent floating, and to stabilize dispersed pigments.

ACCESS® SFR MOH 10,000 is a silicone-based antifoam emulsion designed to eliminate foam in various industrial process. It can be used in a variety of applications such as coatings, adhesives, and personal care products. It offers excellent compatibility with a wide range of organic and inorganic materials, making it easy to incorporate into existing formulations. With its superior thermal stability, this product can also withstand high temperatures, making it ideal for use in extreme conditions. Additionally, ACCESS® SFR MOH 10,000 provides excellent surface wetting properties, enhancing the spreadability of formulations.