Products

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

Elogio AM PLA Filament (Polylactic Acid) is a biodegradable plastic coming from renewable organic resources (corn starch or sugarcane). PLA Filament is recyclable but can also be biological decomposed in composting plants.PLA is a polyester that is built from several lactic acid units. It is colorless and transparent. PLA has a density of about 1.25 kg/cm3. Polymers made of lactic acid are flammable.

Luvocom® 3F PEEK CF 9676 BK Filament is a 15% carbon reinforced PEEK (Polyether Ether Ketone) with extraordinary characteristics in terms of mechanical, thermal and chemical resistance. PEEK with carbon is used in demanding industries like oil and gas, automotive, mechanical engineering, aircraft and aerospace technologies. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts.

Luvocom® 3F PAHT 9825 NT Filament is a unreinforced High-temperature polyamide. Its water uptake takes about 4 times longer to reach the saturation point compared to unmodified PA6, also its saturation point is 5 times lower than conventional PA6 materials. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

PETG Carbon Filament is a Polyethylene Terephthalate reinforced with carbon fibers. Due to the carbon fibers compounded in the PETG you can create 3D printed parts with exceptional stiffness, great dimensional stability and excellent suface quality. This filament is highly suitable for printing a wide range of industrial applications like frames, drones, tools, parts for the automotive and more.

Polyether Ether Ketone (PEEK) PEEK is a semicrystalline thermoplastic with excellent mechanical and chemical resistance properties that are retained to high temperatures. PEEK is regarded as one of the highest performing engineering thermoplastics in the world. PEEK is used to fabricate items used in demanding applications in aerospace, automotive, oil and gas and medical industries.

ABS KEVLAR has been designed for 3D printing by a precise formulation of aramid fibers into ABS materials. The aramid fibers assuring dimensional stability ,preventing the printed object to warp and even make the printed object lighter than regular ABS.

Luvocom® 3F PAHT CF 9891 BK Filament is a high temperature carbon fiber (15%) reinforced polyamide (PA). This grade is based on PA6 and is easy to print with low warping and improved layer bonding is optimized for industrial applications. Typical industries where it is commonly used are in robotics, drones, automotive, aerospace and also widely in the field of functional prototypes and end parts. This particular engineering polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts, the filament can be used on conventional FFF / FDM 3D printing systems without an heated chamber.

Facilan™ HT is a material with a heat deflection temperature of 89 °C and comparatively high tensile strength. The raw material has food contact approval and is not based on Bisphenol-A. Facilan™ HT has been created as a higher performance replacement for PET, PET-G and other copolymers. High stiffness, high strength and high gloss combine to give this material good characteristics to be used in machine building, construction and for end use consumer parts. HT has been created to make parts that survive real life

Luvocom® 3F PPS CF 9938 BK Filament is a Polyphenylene sulfide, linear with 15% added carbon fibers, and is known for it's heat and chemical resistance. Below 200 °C the material doesn't dissolve in any solvent. This particular high performance polymer grade is tailored made for the 3D printing industry to match the injection molding strength requirements and focusing on the serial production of end-parts. The filament can be used on conventional FFF / FDM 3D printing systems due to the enhanced printability, improved layer bonding and the unrequired use of a heated chamber.

Facilan™ C8 is the first product of our Facilan™ family. End use industrial parts and consumer friendly printed parts as well as high end prototypes for business are the applications areas for C8. The first Fi􀅜h Generation 3D printing material, Facilan™ C8 has better mechanical qualities, best surface quality and high tolerances that combine to make a material suited for high throughput and high repeatability production in Additive Manufacturing.

Elogio AM ABS Filament is a thermoplastic and a copolymer that is used for rigid objects. It consists of 5-30% Butadiene, around 50% Styrene and the rest is Acrylonitrile. ABS is a strong material with high toughness and impact resistance. The maximum operating temperature is between 85 °C and 100 °C, depending on the modifications. The minimum operating temperature is -35 °C. ABS is a flammable polymer to which flame retardant can be added. It is also subject to aging by being exposed to the weather conditions (UV light, oxygen, moisture, heat) because Polybutadiene stimulates the oxidation of Polystyrene. This causes discolouration and the plastic loses its mechanical strength. In order to improve this UV stabilizers can be added.