Products

Dynasylan® 6598 is an oligomeric siloxane featuring vinyl, propyl, and ethoxy groups. Developed from Dynasylan® VTMOEO, this colorless and nearly odorless liquid brings enhanced properties. Acting as an excellent silane compatibilizer, it bridges inorganic fillers like kaolin, MDH, and ATH with organic polymers such as EPDM, EVA, and PE. In mineral-filled and peroxide-crosslinked cable systems, Dynasylan® 6598 improves mechanical and electrical attributes, especially in moist conditions. With its high boiling start and flash point, it ensures safety, handling ease, and processing advantages. Furthermore, this product emits significantly less hydrolysis ethanol (VOC) compared to monomeric silanes, addressing environmental considerations.

Dynasylan® 1146 is a hydrophobic diaminofunctional silane widely utilized in adhesives, sealants, and coatings. It enhances the adhesion of amino-reactive resins (e.g., RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces, plastic surfaces, and inorganic fillers. Characterized by randomly distributed linear and cyclic oligosiloxanes, Dynasylan® 1146 fulfills the OECD polymer definition. Its low volatility and viscosity facilitate compounding, while its minimal by-product (VOC) generation contributes to a reduced odor level during application.

TEGO® Antifoam 2460 is an APEO-free organic antifoam concentrate formulated with mineral oil. Designed for use as an anti-foaming agent in the paperboard industry. This product is classified under industrial additives within the category of paper and pulp chemicals, specifically within finishing additives and treatments.

Evonik Modifier 715 is another SiH-terminated polydimethyl siloxane plasticizer for addition-curing silicones. These products do not crosslink but extend the chains of vinyl-terminated silicone polymers (Polymer VS). The use of these modifiers is intended to decrease crosslinking density, resulting in softer elastomers.

Dynasylan® SILBOND® HT-28A is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasting a silica content ranging from 32.5 to 33.5% (as SiO2 ). This silica content arises from a blend of TEOS-derived silica and other components. This formulation is tailored for use in two-component inorganic zinc-rich primers. The product brings forth enhanced toughness and exceptional performance in high-temperature scenarios. The heightened toughness results directly from the increased silica content in contrast to an ethyl polysilicate binder.

TEGO® Antifoam 288 is an emulsion antifoam featuring organo-modified siloxanes, primarily functioning as an anti-foaming agent. Notably compatible, it is suitable for use in the paper and pulp industry, especially in the production of coated paper and paperboard. In addition, it finds application in pressure-sensitive adhesive formulations within the CASE ingredients category.

SITREN® P 750 is a highly effective water repellent that relies on modified silanes and siloxanes supported by an inorganic carrier. This product serves the function of enhancing water repellency and belongs to the product family of finishing additives and treatments within the field of textile and leather chemicals, falling under the broader category of industrial additives and materials technologies.

Dynasylan® SIVO 214 is an aminofunctional silane composition with enhanced crosslinking activity. It serves as an adhesion promoter, facilitating bonding between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). Additionally, it functions as a surface modifier and supports chemical modification of various substances.

TEGO® Antifoam 2-89 is an antifoam emulsion formulated with organo-modified siloxanes. This product functions as an anti-foaming agent, offering good compatibility with industrial processes. It belongs to the Industrial Additives and Materials category within the Construction Chemicals product family and is specifically tailored for use in cement and concrete additives.

TEGO® Antifoam KS 53 is a self-emulsifying organic antifoam concentrate, free of APEOs, and based on food-grade vegetable oil It includes minor quantities of organo-modified siloxanes to enhance its efficiency. It functions as an anti-foaming agent and is well-suited for processes such as polymerization and suspension polymerization.

Dynasylan® 1505 is an amino-functional silane which acts as an adhesion promoter between inorganic materials (for example glass, metals and fillers) and organic polymers (thermosets, thermoplastics and elastomers) and as a surface modifier. This liquid product finds its use in coatings, primers, and industrial additives like foundry resins. Compatible with glass and metal substrates, it's your go-to for various applications, from abrasives manufacturing to pipes and cables. Elevate your materials with Dynasylan® 1505.

Dynasylan® VPS 7163 is an exceptional silane solution offered by Evonik, specifically designed for use in 1K/2K polyurethanes, including reactive hot melt adhesives. This innovative product serves as a valuable tool for formulators, addressing the issue of inadequate adhesion on specific metals and challenging polymer substrates. With Dynasylan® VPS 7163, the need for a primer can be eliminated, providing an efficient solution to enhance bonding performance.

Dynasylan® MEMO is a revolutionary solution for enhancing polymer and resin performance. As a versatile surface modifier and coupling agent, it excels in various applications. This product boasts exceptional chemical resistance, improving filler dispersion and mechanical properties in plastics and elastomers. With features like acid and alkali resistance, low viscosity, and good wet adhesion strength, Dynasylan® MEMO transforms materials into high-performance wonders. Experience its benefits in cables, pipes, and more.

Dynasylan® 1122 is a secondary aminofunctional ethoxysilane, characterized by two symmetric silicone atoms. It functions as an adhesion promoter between inorganic materials (such as glass, metals, fillers) and organic polymers (including thermosets, thermoplastics, elastomers). In addition to its role as a surface modifier, Dynasylan® 1122 can be employed for the chemical modification of various substances.

TEGO® Antifoam 2291 is a silicone-free, self-emulsifying antifoam concentrate without any silica. This APEO-free organic antifoam is designed for use as an anti-foaming agent in waterborne adhesive formulations, aligning with eco-friendly labeling claims. Categorized under CASE ingredients within foam control additives.

Dynasylan® 1124 is a secondary aminofunctional methoxysilane with symmetric silicon atoms, serves as an adhesion promoter between inorganic materials (like glass, metals, fillers) and organic polymers (thermosets, thermoplastics, elastomers). This versatile compound also functions as a surface modifier and enables chemical substance modification. Available as a colorless to yellow liquid with an amine-like odor, Dynasylan® 1124 readily dissolves in alcohols, aliphatic, or aromatic hydrocarbons.

Dynasylan® HYDROSIL 1153 is the ultimate adhesion promoter and surface modifier. Tailored for enhancing bonding between glass and metal, this silane is a game-changer for various applications. Whether in primers, foundry resins, or abrasives, it delivers. With benefits like improved strength, corrosion resistance, and high performance, Dynasylan® HYDROSIL 1153 takes your materials to the next level.

Dynasylan® 1189 is a bifunctional silane, boasts a reactive secondary amine and hydrolyzable methoxysilyl groups. Its dual reactivity enables chemical binding to both inorganic materials (such as glass, metals, fillers) and organic polymers (like thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, surface modifier, and catalyst for substance modification, Dynasylan® 1189 contributes to versatile applications.

Dynasylan® TRIAMO is an organofunctional silane, possesses three reactive amino groups and a hydrolyzable trimethoxysilyl group. Its dual reactivity enables chemical binding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). This versatile compound acts as an adhesion promoter and surface modifier. Presenting as a clear, light to dark yellow liquid with a subtle amine-like odor, Dynasylan® TRIAMO is soluble in alcohols, ketones, esters, and aliphatic and aromatic hydrocarbon solvents.

TEGO® Antifoam 2263 XP is an emulsion antifoam featuring organo-modified siloxanes. This versatile product falls within the category of CASE ingredients and is specifically known for its function as an anti-foaming agent. It is most commonly applied in the production of waterborne adhesives, specifically in the realm of pressure-sensitive adhesive formulations.

Dynasylan® GLYEO is a bifunctional organosilane, features a reactive organic epoxide and a hydrolyzable inorganic triethoxysilyl group. Its dual reactivity facilitates chemical bonding to both inorganic materials (e.g., glass, metals, fillers) and organic polymers (e.g., thermosets, thermoplastics, elastomers). Serving as an adhesion promoter, crosslinking agent, and surface modifier, Dynasylan® GLYEO is a colorless, low-viscosity liquid with a subtle terpentine-like odor. It readily dissolves in alcohols, ketones, and aliphatic and aromatic hydrocarbons.

Dynasylan® AMEO is a bifunctional silane, encompassing a reactive primary amino group and hydrolyzable ethoxysilyl groups. Its dual reactivity enables Dynasylan® AMEO to establish chemical bonds with both inorganic materials (e.g., glass, metals, fillers) and organic polymers (such as thermosets, thermoplastics, elastomers). It serves as an adhesion promoter, crosslinker, and surface modifier.

TEGO® Antifoam ESMK 41 is an organo-modified polysiloxane tailored for its defoaming capabilities. This product, belonging to the polysiloxane chemical family, is organomodified and is available in liquid form. Importantly, it is proudly labeled as solvent-free and is classified under CASE ingredients within the foam control additives category.

NANOPOL® A 720 is a flexible dispersion of colloidal silica in n-butyl acetate solvent. The silica phase is composed of surface-modified, synthetic SiO₂-spheres that are very small in size (Ø 20 nm) and have a narrow particle size distribution. Despite having a high SiO₂-content of 50 wt%, NANOPOL® A 720 is transparent, low in viscosity, and does not show sedimentation due to the agglomerate-free dispersion of the nanoparticles in the solvent. It significantly improves tear resistance, fracture toughness, and modulus. NANOPOL® A 720 can be used to formulate highly filled, transparent adhesives based on various reactive resins. It is also easy to process due to its uncritical solvents.

Dynasylan® SILBOND® HT-33 is a milky-white, low-viscosity pre-hydrolyzed ethyl polysilicate hybrid binder, boasts a silica content ranging from 32.7% to 34.0% (as SiO2). Formulated for two-component inorganic zinc-rich primers, this material brings about improved toughness and exceptional performance in high-temperature applications. The elevated SiO2 content directly contributes to its enhanced toughness.

Dynasylan® MTMS is an alkyltrialkoxysilane, holds a pivotal role in sol-gel systems. It appears as a colorless, low-viscosity liquid. Notably trifunctional, all three alkoxy groups possess hydrolytic capability, while the methyl group introduces organic character. Hydrolysis instigates the formation of silanol groups, which subsequently engage in condensation reactions to establish robust siloxane bonds (-Si-O-Si-). This condensation process coincides with hydrolysis after a threshold of silanol groups emerges. Hydrolysis and condensation rates depend on pH, concentration, solvent, temperature, and the catalyst.

Dynasylan® SIVO 160 presents a water-borne, storage-stable silane-based sol-gel system engineered for formulating inorganic surface treatment primers. A part of the SIVO® SOL Technology, it inherits the benefits of its established series counterparts by excluding heavy metals, fluorides, and solvents. Designed for minimal volatile organic content, its polymeric nature endows it with high reactivity. This is highlighted by its remarkably low curing temperature range of 20 to 80 °C, a significant advancement for water-borne sol-gel systems. Dynasylan® SIVO 160, appearing as a clear to slightly opaque, colorless to slightly yellow, low-viscosity liquid, offers versatile utility.

Dynasylan® MTES is an alkyltrialkoxysilane, plays a vital role in sol-gel systems. It appears as a colorless, low-viscosity liquid. Utilization involves hydrolysis catalyzed by acid or alkali. As a trifunctional compound, all three alkoxy groups partake in this reaction, enriched by the added organic character from the methyl group. Hydrolysis generates silanol groups that subsequently form highly stable siloxane bonds (-Si-O-Si-) through condensation. This parallel process occurs after a certain amount of silanol groups emerge. The pace of hydrolysis and condensation depends on pH, concentration, solvent, temperature, and the catalyst.

Dynasylan® SILBOND® 40 is an ethyl polysilicate, emerges from partial hydrolysis of tetraethyl orthosilicate (TEOS). This transformation converts ethoxy groups into hydroxyl groups, generating silanols. Subsequent condensation of silanols engenders siloxane bonds (-Si-O-Si-O-) and prompts eventual gelation. Often deployed as an intermediary, Dynasylan® SILBOND® 40 undergoes further hydrolysis to produce a binder suitable for diverse applications. These include inorganic zinc-rich primers, investment casting molds, ceramic shapes, coatings, and thermal insulation.

Dynasylan® 6490 is a concentrate of vinyl silane (oligomeric siloxane) containing both vinyl and methoxy groups. This nearly odorless, colorless, low-viscosity liquid acts as an excellent compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

Dynasylan® HYDROSIL 2627 is an innovative surface modifier and crosslinking agent that transforms materials. Designed for glass and metal substrates, this VOC-free organosilane enhances adhesion and coupling. With a liquid water carrier, it ensures excellent processability. From cables to laminates, Dynasylan® HYDROSIL 2627 revolutionizes your plastics and elastomers with its versatile benefits.

Evonik Catalyst TD 18 is an organotin compound designed for catalyzing single- and two-component condensation-curing systems based on silicones as well as silane-terminated polyurethanes (Polymer ST). Chemically characterized as dioctyltin dicarboxylate, Evonik Catalyst TD 18 appears as a colorless to yellow substance.

Dynasylan® PTMO exhibits trifunctional behavior as all three alkoxy groups can hydrolyze. This compound also features a propyl group that imparts hydrophobic attributes to sol-gel coatings. Hydrolysis initiates silanol group formation, leading to subsequent condensation reactions that yield stable siloxane bonds (-Si-O-Si-). Condensation progresses alongside hydrolysis, provided a certain amount of silanol groups are present. The speed and ratio of hydrolysis and condensation hinge on factors like pH, concentration, solvent, temperature, and catalyst.

Dynasylan® 6498 is a concentrate of vinyl silane (oligomeric siloxane) containing vinyl and ethoxy groups. This low-viscosity liquid, nearly odorless and colorless, serves as a superb compatibilizer between inorganic fillers (such as kaolin, MDH, ATH) and organic polymers (including EPDM, EVA, PE).

TEGO® Surten 219 E surfactant is 100% active Gemini wetting agent technology for use in a wide range of aqueous applications. TEGO® Surten 219 E surfactant shows excellent dynamic surface tension reduction with low foam tendency. TEGO® Surten 219 E surfactant is easy-to handle liquid that contains no added alkylphenol ethoxylates (APEs).

Dynasylan® HYDROSIL 2926 is a versatile organosilane solution designed to enhance various applications. This water-based product acts as a surface modifier, crosslinking agent, and adhesion promoter. It effectively works with polymers like Polyethylenes (PE), Polypropylenes (PP), Epoxies (EP), and more. Meeting regulatory standards such as REACH Exempt, this liquid solution is available in cans and drums. Trust in its high performance and compatibility for improved results.