Products

AEROSIL® 300 is a hydrophilic fumed silica with a specific surface area of 300 m²/g.

AEROSIL® 380 is a hydrophilic fumed silica with a specific surface area of 380 m²/g.

AEROSIL® R 812 is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It can be used for sedimentation stabilization and due to its high hydrophobicity as defoaming agent.

AEROSIL® R 974 is hydrophobic fumed silica grades treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recommended for improving the sedimentation stability of defoamer dispersions as well.

AEROSIL® R 805 is a high thickening fumed silica surface treated with OCTMO.

AEROSIL® R 106 is a hydrophobic fumed silica after treated with D4 (Octamethylcyclotetrasiloxane).

AEROSIL® R 812 S is hydrophobic fumed silica grade treated with HMDS (Hexamethyldisilazane). It is even more hydrophobic than AEROSIL® R 812 and convenient for stabilizing a defoamer and well suitable as a component of foam control agents.

AEROSIL® R 816 fumed silica powder offers an alternative technology to stabilize oil/water emulsions. Due to the special surface modification of the silica both hydrophilic and hydrophobic properties are introduced in just one material. This enables AEROSIL® R 816 to enrich at oil/water interfaces and thereby stabilize oil droplets in a continuous water phase by the Pickering effect.Furthermore, AEROSIL® R 816 brings structure to the continuous water phase and increases its viscosity which limits the mobility of the oil droplets, thereby providing for even more emulsion stability.

AEROSIL® R 8200 is a structure modified hydrophobic silica grade treated with HMDS (Hexamethyldisilazane). It is characterized by an extremely low thickening effect and high compacted bulk density. Its high hydrophobicity makes it suitable as a defoamer silica.

AEROSIL® R 972 is hydrophobic fumed silica grade treated with DDS (Dichlordimethylsilane). The moderate hydrophobicity of these AEROSIL® products is suited for defoaming properties in the presence of appropriate hydrophobic liquids. They are recomended for improving the sedimentation stability of defoamer dispersions as well.

ZETASPERSE® 3800 dispersant is specifically designed to offer robust stabilization for pigments, fillers, and various solids within aqueous dispersions. This dispersant is based on a comb polymer with a moderate molecular weight, providing strong steric stabilization. Its versatile characteristics make it suitable for a wide array of formulation needs.

SIPERNAT® 22 LS is a very finely milled, hydrophilic silica. It is primarily used as a free-flow agent in other applications.

VISIOMER® ETMA (ethyltriglycol methacrylate) is a hydrophilic methacrylate monomer known for its ability to enhance adhesion, flexibility, and minimize shrinkage in polymers. It exhibits low volatility and serves as a reactive diluent in reactive systems. This versatile compound finds applications in industries such as adhesives and sealants, as well as coatings.

VISIOMER® C18 PEG 1105 MA W is a polar methacrylate monomer in water and GMAA, consisting of a hydrophilic polyethylene glycol side chain with a C16-C18 hydrophobic tail. This monomer is well-suited for use as an associative polymeric thickener in emulsion polymers. Industries such as coatings, healthcare, oil and gas, paper, personal care, and water treatment can benefit from its properties.

VISIOMER® TRGDMA (triethylene glycol dimethacrylate) is a dimethacrylate monomer with low viscosity, making it well-suited for use as a crosslinking agent in free radical polymerization. Additionally, it serves as an adhesion promoter and hardener for PVC plastisols, as well as a component in reactive resins. This versatile compound finds applications in a wide range of industries, including 3D printing, adhesives and sealants, coatings, construction, personal care, and healthcare, as well as plastics and rubber.

AEROSIL® 200 HV is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 208 is a fumed silica aftertreated with polydimethylsiloxane with excellent thickening properties.

AEROSIL® 130 is a fumed silica with a high specific surface area, making it an excellent thickening and reinforcing agent for a wide range of applications. This product is particularly well-suited for use in adhesives, coatings, and composites, as it can improve mechanical strength and increase the durability of the final product. AEROSIL® 130 is a hydrophilic fumed silica with a specific surface area of 130 m2/g.

AEROSIL® 200 is a hydrophilic fumed silica with a specific surface area of 200 m²/g.

AEROSIL® R 202 is a hydrophobic fumed silica grade, treated with a polydimethylsiloxane. This product can be used in defoamer formulations for sedimentation stabilization and due to its high hydrophobicity as defoaming component.