Products

Kinetic is a unique nonionic organosilicone-based wetter/spreader/penetrant spray adjuvant. It is designed to provide rapid spreading and absorption of pesticide and nutrient sprays into plant leaves and stems. Because of its unique abilities, Kinetic can be used at much lower rates than conventional surfactants.

Kinetic is a unique nonionic organosilicone-based wetter/spreader/penetrant spray adjuvant. It is designed to provide rapid spreading and absorption of pesticide and nutrient sprays into plant leaves and stems. Because of its unique abilities, Kinetic can be used at much lower rates than conventional surfactants.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Point Blank WM is a concentrated, polymer-based drift reduction and deposition agent with shear resistance. It disperses easily and is compatible with all glyphosate products.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Cohere is a film-free, wax-soluble spreader-sticker adjuvant for fungicide and insecticide applications. It contains surface melding technology that allows the spray solution to penetrate the plant’s surface. Unlike most stickers, Cohere does not require sunlight exposure to set the solution and leaves no sticky residues on spray equipment.

Buffer P.S. is a blend of buffering agents designed to adjust the pH of alkaline waters and minimize hydrolysis of pesticides, which tend to decompose in alkaline spray solutions. Buffer P.S. also affects the wetting and spreading characteristics of a spray solution.

Blendex VHC is a blend of compatibility and stabilizing agents for use with multiple products in a single tank mix. It affects the wetting and spreading characteristics of a spray solution and is non-corrosive.

Hyper-Active is a pest surface-active agent designed specifically for use with insecticides, fungicides and miticides. The spray coverage and penetration improvements are applicable for both plant and pest surfaces. Hyper-Active acts as a film-free sticker to help reduce wash off.

Aero Dyne-Amic is an effective formulation of specialized oils, emulsifiers and buffering agents designed for use with insecticides and fungicides applied aerially or in low-volume ground applications. It also acts as a buffer and can prevent the decomposition of pesticide active ingredients.

Point Blank WM is a concentrated, polymer-based drift reduction and deposition agent with shear resistance. It disperses easily and is compatible with all glyphosate products.

Interactive is a combination of translocating surfactants, wetting agents and ammonium salts designed to enhance the efficacy of herbicides. Interactive also contains sequestrants and de-foaming agents to improve spray application.

Joint Venture is a blend of nonionic surfactants and esterfied fatty acids designed for use with insecticides, fungicides and miticides.

Joint Venture is a blend of nonionic surfactants and esterfied fatty acids designed for use with insecticides, fungicides and miticides.

Transactive HC is a basic blend of nonionic surfactants, ammonium salts and a pH buffering system designed to replace crop oil concentrates and methylated seed oils in certain herbicide applications.

Blendex VHC is a blend of compatibility and stabilizing agents for use with multiple products in a single tank mix. It affects the wetting and spreading characteristics of a spray solution and is non-corrosive.

AccuQuest WM is a deposition agent and liquid ammonium sulfate replacement (AMS). It is a unique blend of polymers, water conditioners and de-foaming agents that work together in a water-based solution of ammoniacal nitrogen to enhance the deposition and performance of herbicides.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Aero Dyne-Amic is an effective formulation of specialized oils, emulsifiers and buffering agents designed for use with insecticides and fungicides applied aerially or in low-volume ground applications. It also acts as a buffer and can prevent the decomposition of pesticide active ingredients.

Cohere is a film-free, wax-soluble spreader-sticker adjuvant for fungicide and insecticide applications. It contains surface melding technology that allows the spray solution to penetrate the plant’s surface. Unlike most stickers, Cohere does not require sunlight exposure to set the solution and leaves no sticky residues on spray equipment.

Justified increases droplet size and reduces driftable fines for a lower risk of off-target drift. With an oil-based formulation, the driftable fine reduction achieved with Justified is not affected by pump shearing. It decreases evaporation and improves deposition and coverage, delivering more ai to the target. Justified also decreases foam and has excellent compatibility with tank-mix partners and equipments. Justified is made with a renewable resource.

Cohere is a film-free, wax-soluble spreader-sticker adjuvant for fungicide and insecticide applications. It contains surface melding technology that allows the spray solution to penetrate the plant’s surface. Unlike most stickers, Cohere does not require sunlight exposure to set the solution and leaves no sticky residues on spray equipment.

Asset RS is a carboxylic acid formulation that promotes early root development, allowing crops to utilize available nutrients and moisture more efficiently. With improved root development and uptake, crops are more tolerant of late season growing stresses.

Aero Dyne-Amic is an effective formulation of specialized oils, emulsifiers and buffering agents designed for use with insecticides and fungicides applied aerially or in low-volume ground applications. It also acts as a buffer and can prevent the decomposition of pesticide active ingredients.

AccuQuest WM is a deposition agent and liquid ammonium sulfate replacement (AMS). It is a unique blend of polymers, water conditioners and de-foaming agents that work together in a water-based solution of ammoniacal nitrogen to enhance the deposition and performance of herbicides.

Hyper-Active is a pest surface-active agent designed specifically for use with insecticides, fungicides and miticides. The spray coverage and penetration improvements are applicable for both plant and pest surfaces. Hyper-Active acts as a film-free sticker to help reduce wash off.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Agri-Dex is a blend of heavy range, paraffin-based petroleum oil and nonionic emulsifiers. Considered the industry standard of comparison, Agri-Dex is designed for use with a broad range of pesticides where a crop oil concentrate adjuvant is recommended.

Ad-Spray is a nonionic wetter and spreader designed to quickly wet and spread a more uniform spray deposit over plant surfaces, positively affecting pesticide spray application and pesticide efficacy. Ad-Spray can be used through irrigation systems for improved filtration of water into the soil.

Silwet L-77 is a nonionic organosilicone surfactant co-polymer that has enhanced wetting and spreading characteristics when used in aqueous sprays.

Agri-Dex is a blend of heavy range, paraffin-based petroleum oil and nonionic emulsifiers. Considered the industry standard of comparison, Agri-Dex is designed for use with a broad range of pesticides where a crop oil concentrate adjuvant is recommended.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Interactive is a combination of translocating surfactants, wetting agents and ammonium salts designed to enhance the efficacy of herbicides. Interactive also contains sequestrants and de-foaming agents to improve spray application.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.

Cohere is a film-free, wax-soluble spreader-sticker adjuvant for fungicide and insecticide applications. It contains surface melding technology that allows the spray solution to penetrate the plant’s surface. Unlike most stickers, Cohere does not require sunlight exposure to set the solution and leaves no sticky residues on spray equipment.

Induce is a special blend of nonionic, low-foam components. It is designed to quickly wet and spread a more uniform spray deposit over plant leaf and stem surfaces. With a high level of free fatty acids, Induce reduces wash-off.