Products

Syncal™ OB407PAO is a specialty overbased calcium sulfonate that is designed for use in applications where the benefits of PAO are desired. The calcium-to-sulfonate ratio is optimized for good compatibility with other componentry. The product lends itself to a variety of applications including those where low temperature properties are needed. Syncal™ OB407PAO is a good choice for overbased calcium sulfonate grease feed. The high TBN offers good acid neutralizing and rust and corrosion inhibiting characteristics. This product can be considered as a component in a variety of lubricating oils and greases, coatings, rust preventives, metalworking fluids, and automotive lubricants.

Neutral Calcium Sulfonates Syncal™ N45H is dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process.

Soluble Base 5100 is a formulated soluble oil emulsifier package specifically designed to emulsify naphthenic oils typically with aniline points of 155°F to 175°F. Its good hard water stability and rust inhibiting characteristics make this product an excellent choice for formulating soluble oils and semi-synthetic fluids used in machining, grinding, and forming operations. Soluble Base 5100 offers good rust inhibiting and emulsification properties at addition levels of 15 to 25% concentrations in oil.

Synbar™ N50HF is a first intent, neutral barium sulfonate designed to provide excellent demulsibility, detergency, and optimal non-staining rust protection. It is ideal for applications where superior rust and corrosion protection are needed. Synbar™ N50HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

K-Ox™ 9100 is a barium free non-staining, non-emulsifiable, alkali resistant, water displacing and water separating rust preventive concentrate which is soluble in aliphatic and aromatic solvents, naphthenic and paraffinic oils, and a selection of natural oils. K-Ox™ 9100 is particularly effective in displacing water from metal parts after machining operations or alkali cleaning. K-Ox™ 9100 will deposit an ultra-thin oily or waxy film, depending upon the diluent used. K-Ox™ 9100 will provide excellent humidity resistance and provide limited protection in salt environments and acid atmospheres.

Soluble Base 5700 is a versatile sulfonate and PIBSA derived soluble oil emulsifier package. It is designed to emulsify paraffinic and naphthenic oils, as well as the more difficult re-refined oils that are primarily paraffinic in composition. Soluble Base 5700 offers hard water stability and rust inhibiting characteristics. In addition, the PIBSA technology provides exceptional system cleanliness by preventing buildup of soap and sludge in the sumps. In turn, this limits microbial growth and thereby enhances corrosion protection and extends fluid life.

Cruderes™ HV25 is a dark colored resin, derived from Pennsylvania and Appalachian Grade Crude refinery processes. CrudeResTM HV25 is higher in carbon and lower in sulfur and oxygen than other resins from naphthenic and asphaltic crudes.

Overbased Magnesium Sulfonate Magsul™ OB9A is a cost efficient overbased magnesium sulfonate that lends detergent/dispersant, acid neutralizing, rust and corrosion inhibiting characteristics to a variety of lubricants. Magsul™ OB9A is a good choice for automotive, marine, diesel and stationary diesel lubricants. Nominal dosages ranging from 0.25% to 5.0% (Wt.) in the finished lubricant are effective. Magnesium sulfonates contribute lower ash to formulated products than the traditional overbased calcium sulfonate counterparts. This product exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

PIBSI 1060A is a polyisobutylene succinicimide produced from polyisobutylene anhydride and a high molecular weight amine. This quality product is manufactured by thermal process to render a chlorine-free PIBSI.

Syncal™ N50HF are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products offer excellent rust and corrosion inhibiting properties. The high polarity of Syncal™ N50HF impart excellent water displacing characteristics to a variety of formulated products.

K-Syn™ CI-200 is an economical and highly effective corrosion inhibitor formulated to provide protection to cast iron and steel alloys. K-Syn™ CI-200 is designed for use in synthetic and low oil semi-synthetic metalworking fluids, water-based hydraulic fluids, and industrial cleaners. This amine carboxylate is inherently low foaming and has exceptional hard water stability. K-Syn™ CI-200 will deposit a thin oily-type film, upon the evaporation of water, which will also provide some short-term storage protection. K-Syn™ CI-200 contains no nitrates/nitrites, boron or secondary amines.

Jalpon™ 1200A is a solvent free, gelled calcium sulfonate compound in a mineral oil diluent. It is designed to allow the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200A will deposit an oily film. Jalpon™ 1200A contains a wax component for improved film integrity and resistance to water in thin film applications. Jalpon™ 1200A is easily emulsified for use in waterborne rust preventives and coatings.

K-Ox™ W15L and W75L are synthetic fatty acids made from petroleum hydrocarbons. K-Ox™ W15L and W75L may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. They are not subject to bacterial degradation as are the natural fats. The esters derived from K-Ox™ W15L and W75L offer excellent lubricity and wetting characteristics to metalworking formulations. The higher acid number of K-Ox™ W75L offers more reactive sites for effective conversion to a variety soaps and esters.

Synthetic Sodium Sulfonates Synsul™ NA is a series of synthetic sodium sulfonates of various molecular weights. These products are carefully and selectively manufactured to ensure consistent quality with little variation from batch to batch. The lower molecular weight products, Synsul™ NA 420 and Synsul™ NA 450, have good affinity for water making them excellent components in emulsifier packages. The higher molecular weight products, Synsul™ NA 480, and Synsul™ NA 535, have less affinity for water thereby imparting rust and corrosion inhibiting characteristics. The advantages of these products include lower viscosity for ease of handling, lighter color, and greater batch-to-batch consistency.

K-Ox™ P600/45 is a synthetic fatty acid made from petroleum hydrocarbons. K-Ox™ P600/45 may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. It is not subject to bacterial degradation as are the natural fats. K-Ox™ P600/45 is a rust preventive intermediate which is readily converted to a variety of metallic soaps.

K-Ox™ W15L and W75L are synthetic fatty acids made from petroleum hydrocarbons. K-Ox™ W15L and W75L may be used as a total or partial replacement for natural fats, oils, or fatty acid in the formulation of cutting, drawing, spinning, and rolling oils. They are not subject to bacterial degradation as are the natural fats. The esters derived from K-Ox™ W15L and W75L offer excellent lubricity and wetting characteristics to metalworking formulations. The higher acid number of K-Ox™ W75L offers more reactive sites for effective conversion to a variety soaps and esters.

Jalpon™ 1250 is a lower viscosity thixotropic overbased calcium sulfonate designed for use as an additive in oils for metal removal and forming operations including metal stamping and drawing, as well as in other machining oils such as neat and soluble oils.

K-Amide™ X-1011 is a versatile, low-foaming rust and corrosion inhibitor for use in metalworking fluids, alkaline cleaners, and water-based quenching fluids. K-Amide™ X-1011 exhibits good compatibility with sulfonates, PIBSAs and other products as part of metalworking formulary. The non-tacky films of K-Amide™ X-1011 are easily removed with alkaline cleaners. K-Amide™ X-1011 is non-staining to yellow metals and can be used as a component of soluble oils as well as synthetic and semi-synthetic fluids. K-Amide™ X-1011 offers excellent cast iron chip test results at low concentrations.

Synbar™ OB70HF is a cost effective overbased barium sulfonate. This product will provide the formulator with excellent demulsibility, detergency, and optimal non-staining rust and corrosion protection, even under acidic conditions. Synbar™ OB70HF exhibits good compatibility with most mineral base oils, white oils, and synthetic base stocks.

K-Amide™ X-1040 is a special lard oil and DIPA based amide that is oil and/or water dispersible. K-Amide™ X-1040 is designed to offer lubricity, rust and corrosion protection, and reserve alkalinity in a variety of metalworking formulations. K-Amide™ X-1040 is low foaming and can be used as a secondary emulsifier. K-Amide™ X-1040 also improves the viscosity of water-based solutions.

Linear Dodecylbenzene Sulfonic Acid Sulfon™ 201 is a very highly active, biodegradable surfactant intermediate produced by the sulfur trioxide sulfonation of linear alkylbenzene (C10 – C13). It is recommended as a raw material for the manufacture of household, institutional, and industrial detergents. It is also a promoter for use in the manufacturing process of overbased calcium sulfonate grease and in the preparation of emulsifiers and wetting agents. Sulfon™ 201 can be neutralized with a wide range of inorganic bases and organic amines to produce a variety of sulfonates.

Syncal™ OB408 is multifunctional specialty overbased calcium sulfonates manufactured from long chain alkylbenzene sulfonic acids. These products exhibit good oil solubility, detergency, and excellent high temperature stability. Not only are these products good TBN boosters, they are also excellent feedstocks for manufacturing overbased calcium sulfonate grease. Greases manufactured from either Syncal™ OB408 tend to convert readily and exhibit outstanding gel strength retention properties.

Neutral Calcium Sulfonates Syncal™ 45LC are dispersant type, oil soluble, slightly alkaline calcium sulfonates. These products impart excellent rust and corrosion inhibiting properties due to their high molecular weight and low salt content. All have characteristically low chloride contents due to the nature of the manufacturing process. Syncal™ 45LC is especially low with a maximum chloride value of 50 ppm guaranteed.

Syncal™ OB405WO is a high quality overbased calcium sulfonate grease feed and lubricant component in a white oil diluent. Syncal™ OB405WO is produced from a proprietary long chain alkylbenzene sulfonic acid. Syncal™ OB405WO has been specifically designed for use in incidental contact, food grade lubricant applications. Greases made with Syncal™ OB405WO will convert readily and exhibit exceptional mechanical stability, high dropping points, good load carrying performance, along with reduced wear. Greases made from Syncal™ OB405WO will impart excellent resistance to water wash-out and corrosion.

K-Ox™ 9105 is a barium-based non-staining, non-emulsifiable, alkali resistant, water displacing and water separating rust preventive concentrate which is soluble in aliphatic and aromatic solvents, and naphthenic and paraffinic oils. K-Ox™ 9105 is particularly effective in displacing water from metal parts after machining operations or alkali cleaning. K-Ox™ 9105 will deposit an ultra-thin oily or waxy film, depending upon the diluent used. K-Ox™ 9105 will provide excellent humidity resistance and provide limited protection in salt environments and acid atmospheres.

PIBSA 1100 is polyisobutylene succinic anhydrides manufactured via thermal process from a 1000 molecular weight polyisobutylene. These PIBSA intermediates are the precursors used in the preparation of ashless dispersants and emulsifiers. Both PIBSA 1070(P/N) and 1100 have no residual chlorine and exhibit good solubility in paraffinic and naphthenic oils. To ease handling, PIBSA 1070 has been diluted to a 70% active concentration with either a paraffinic (1070P) or naphthenic (1070N) base oil.

Oil-Free Sodium Sulfonates Synsul™ ES440 and ES490 are oil soluble synthetic sulfonates in an ester diluent. These unique, mineral oil-free products offer excellent lubricity, dispersion properties and corrosion inhibition in a variety of metalworking fluids.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

NSP Naturals™ 450, 500, and 550 are oil soluble “natural” sodium sulfonates derived from the sulfonation of specific solvent neutral base oils. These products do not contain any aromatic polynuclear hydrocarbons, carboxylates, asphaltenes or chlorinated derivatives. All NSP Naturals™ products offer the formulator excellent solubility, emulsification, and anti-corrosive characteristics due to the broad molecular weight distribution of these products.

Synstock™ HV40X and HV100X polyalphaolefins are high viscosity API Group IV synthetic base stocks. They are decene derived, hydrogenated oligomers made by catalytic polymerization of linear alphaolefins. These Synstock™ products meet the requirements for technical white oil and are listed in the NSF White Book as Category Code H1. Benefits from choosing Synstock™ Group IV base oils over other options include good hydrolytic and thermal stability, very low pour points, and low volatility.

Jalpon™ 1200 is a solvent free, gelled calcium sulfonate in a mineral oil diluent. It is designed to allow for the easy formulation of solvent-free rust preventives, lubricants, and coatings. Jalpon™ 1200 deposits an oily film. It is also easily emulsified for use in waterborne rust preventives and coatings.

Synstock™ HV40X and HV100X polyalphaolefins are high viscosity API Group IV synthetic base stocks. They are decene derived, hydrogenated oligomers made by catalytic polymerization of linear alphaolefins. These Synstock™ products meet the requirements for technical white oil and are listed in the NSF White Book as Category Code H1. Benefits from choosing Synstock™ Group IV base oils over other options include good hydrolytic and thermal stability, very low pour points, and low volatility.

Oil-Free Sodium Sulfonates Synsul™ ES440 and ES490 are oil soluble synthetic sulfonates in an ester diluent. These unique, mineral oil-free products offer excellent lubricity, dispersion properties and corrosion inhibition in a variety of metalworking fluids.

Syncal™ N57C and N57HF are cost efficient mid-base calcium sulfonates that will lend detergent, dispersant, acid neutralizing, and corrosion inhibiting characteristics to a variety of rust preventives and lubricants. The dispersed soluble CaCO3 helps to neutralize acids, such as HCl, thereby enhancing rust inhibiting characteristics when used in combination with other EP/AW additives like chlorinated paraffin.

K-Ox™ 9056 is a water displacing additive designed for formulating rust and corrosion inhibitors. K-Ox™ 9056 can be used to protect bright, ground, or highly polished steel surfaces. It is soluble in aliphatic solvents, low aromatic solvents, kerosene, and most oils. K-Ox™ 9056 imparts water displacing characteristics and offers rust and corrosion protection in high humidity, saltwater, and acid atmospheres. K-Ox™ 9056 can also be used in metalworking fluids and wax emulsions as a corrosion inhibitor when properly formulated with an amine such as triethanolamine.

Synbar™ OB70 (Overbased) is first intent dispersant type, oil soluble barium sulfonates. These products impart excellent water separation and rust and corrosion inhibiting properties while maintaining low-staining characteristics due to their high molecular weight, polarity, and low chloride content.