Products

Altron™ 1000 PC machine grade polycarbonate is a transparent, amorphous thermoplastic that offers exceptional impact strength and elasticity, minimal moisture absorption, and outstanding resistance to acidic solutions. This grade is produced from select batches of non-UV stabilized polycarbonate resin that complies with EU and FDA regulations for plastics intended to come into contact with food products.Features:Transparent, amorphous thermoplasticSuperior impact strengthSuperior flexural modulus of elasticityMinimal moisture absorptionOutstanding resistance to acidsGreat electrical characteristicsBenefits:Durable and able to withstand high impactsResistant to deformation under loadLow moisture absorption means no swelling or warpingResistant to acidic solutions, making it suitable for a variety of applicationsExcellent electrical characteristics, making it suitable for semiconductor and electronics applicationsApplications:Semiconductor and electronics applicationsTransparent structural applicationsFood contact applications that comply with EU and FDA regulations

Ketron® HPV Polyetheretherketone PEEK shapes, a carbon fiber reinforced, graphite and PTFE lubricated material that offers the lowest coefficient of friction and the best machinability of all PEEK materials. This black-colored material is designed for applications where low wear and friction, and high pressure-velocity capabilities are needed. Features: Carbon fiber reinforced with graphite and PTFE lubricants Lowest coefficient of friction and best machinability of all PEEK materials Excellent tribological properties (low friction, long wear and high pressure-velocity capabilities) Benefits: Improves the performance of service bearings, bushings, insulators, valves, and seals with its combination of low wear and friction and high LPV Long wear and high pressure-velocity capabilities make it suitable for wear and friction applications The carbon fibers, PTFE and graphite lubrication results in a Ketron PEEK "Bearing Grade" Applications: Service bearings Bushings Insulators Valves Seals Wear and friction applications Ketron® HPV PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your service bearings, bushings, insulators, valves, and seals or need a material suitable for wear and friction applications, Ketron® HPV PEEK is the ideal solution.

KyronMAX® S-4330 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of high-temperature PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required, especially at high temperatures.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessHigh-temperature PPA base: provides excellent thermal stability, dimensional stability, and chemical resistance at high temperaturesInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is needed, such as in high temperature motors and generators.KyronMAX® S-4330 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered

Ketron® CM CA30 Polyetheretherketone PEEK, a compression-molded, 30% carbon fiber-reinforced grade that offers exceptional impact, corrosion, chemical, and wear resistance. This black-colored material is designed for applications where high strength, stiffness, and thermal conductivity are needed. Features: 30% carbon fiber reinforced for added strength and stiffness Outstanding impact, corrosion, chemical, and wear resistance Reduced thermal expansion for improved performance High thermal conductivity for rapid heat dissipation Suitable for large parts and bearing applications Benefits: Extends the life of components by resisting wear and corrosion Improves pressure-velocity capabilities and bearing life by dissipating heat faster Provides 3.5 times higher thermal conductivity compared to unreinforced PEEK Offers even higher stiffness, mechanical strength, and creep resistance than Ketron GF30 PEEK Applications: Bearing applications Large parts Automotive industry Aerospace industry Medical industry Industrial machinery Chemical processing Ketron® CM CA30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions. Whether you are looking to improve the performance of your bearing applications, need a strong and stiff material for large parts or are in the automotive, aerospace, medical, industrial machinery or chemical processing industries, Ketron® CM CA30 PEEK is the ideal solution.

Semitron® MPR 1000 - an advanced engineering material that is specially developed for use in the semiconductor and electronics industry. This material boasts excellent heat resistance and low erosion rates in plasma chambers, making it a top choice for vacuum chamber applications such as etch, CVD, and ion implant.Features:Longevity: Increased life in plasma chambers (up to 25X over polyimide in ozone)Clean: Low ionic metal content and low out-gassingValue: Lower overall cost in use compared to traditional materials used in vacuum chamber applications such as quartz, ceramics, and engineering plasticsBenefits:Long-lasting performance in plasma-based vacuum chambersLow maintenance and cost-effective solutionClean and efficient, suitable for semiconductor and electronics industryApplications:Clamp ringsTrench ringsScrewsPinsShower headsCentering pinsFocus ringsInsulatorsVacuum padsWafer guidesSemitron® MPR 1000 is a versatile material that is ideal for use in vacuum chamber applications within the semiconductor and electronics industry. With its outstanding heat resistance and low erosion rates, this material is a cost-effective and efficient solution that ensures longevity and clean performance in plasma-based vacuum chambers.

Semitron® ESd 480 Polyetheretherketone PEEK electro static dissipative shapes are a top choice for critical test fixture and wafer handling applications in wet process tools, where static dissipation is critical. These shapes are specifically designed to provide excellent chemical resistance properties and high dimensional stability under varying environmental conditions.Features:Excellent chemical resistance propertiesHigh dimensional stability under varying environmental conditionsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for critical test fixture and wafer handling applications in wet process toolsProvides a dissipative range of 106 - 109 ohms/sq, ensuring static dissipation is criticalDimensionally stable, making it ideal for critical test fixture applicationsApplications:Test fixture and wafer handling applications in wet process toolsStructural applications in wet process tools where static dissipation is importantWell-suited for use in wafer handling and other structural applications in wet process tools where static dissipation is important.

Duratron® U2200 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, high temperature resistance, and a low Coefficient of Linear Thermal Expansion. With 20% glass-reinforcement, Duratron® U2200 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:20% glass-reinforced for exceptional rigidity and dimensional stabilityHigh temperature resistanceLow Coefficient of Linear Thermal ExpansionExceptional strength-to-weight ratio and increased tensile strengthGreat electrical insulatorBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability, low thermal expansion and electrical insulation is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsElectrical insulationApplications that require dimensional stability, high temperature resistance and low thermal expansionDuratron® U2200 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments while providing electrical insulation, Duratron® U2200 PEI is the ideal solution.

KyronMAX® S-9230 is a high-performance polymer that combines the excellent strength, stiffness, and thermal resistance of PEEK (Polyetheretherketone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPEEK base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength at high temperatures.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the aerospace, medical, and industrial industries where high temperature, strength and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesMedical devices, implants and components in medical equipment that require high strength and biocompatibility.KyronMAX® S-9230 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries.Please note that no stock shapes are offered.It's also worth mentioning that PEEK is a biocompatible material and can be used in medical applications, but it's important to note that should be evaluated for the specific application and use case.

Sultron® Polysulfone PSU is a versatile and reliable thermoplastic material that offers a combination of excellent mechanical, thermal, and electrical properties. With its ability to withstand high temperatures and resist a wide range of chemicals, Sultron® PSU is the ideal solution for applications that demand the highest level of performance and durability. Features: Translucent material with excellent mechanical, thermal, and electrical properties Often replaces polycarbonate in applications requiring higher temperature resistance and improved chemical resistance Outstanding radiation stability and resistance to acidic and salt solutions, detergents, hot water, and steam Benefits: Broad temperature range capability makes Sultron® PSU suitable for a wide range of applications Good thermal and electrical insulation characteristics ensure consistent performance in demanding environments Hydrolysis resistant and radiation stable, making it a reliable choice for analytical instrumentation, medical devices, and semiconductor process equipment components Applications: Analytical instrumentation Medical devices Semiconductor process equipment components Any application that demands high temperature resistance and chemical resistance.

Ketron® GF30 Polyetheretherketone PEEK, a 30% glass fiber reinforced grade that offers excellent dimensional stability and outstanding chemical, corrosion, and creep resistance. This material is designed for applications where high strength, stiffness, and stability are needed, especially at high temperatures. Features: 30% glass fiber reinforced for added strength and stiffness Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Low expansion rate and high flexural modulus Suitable for structural applications that require improved strength, stiffness, or stability, especially at temperatures above 300°F / 150°C Benefits: Offers improved strength, stiffness, and stability in high temperature applications Low expansion rate and high flexural modulus make it suitable for structural applications Excellent dimensional stability and outstanding chemical, corrosion, and creep resistance Applications: Structural applications Aerospace industry Automotive industry Medical industry Industrial machinery Chemical processing Ketron® GF30 PEEK is the perfect choice for those looking for a durable and high-performance material that can withstand harsh conditions, especially at high temperatures. Whether you are looking to improve the performance of your structural applications in the aerospace, automotive, medical, industrial machinery or chemical processing industries, Ketron® GF30 PEEK is the ideal solution.

Techtron® 1000 PPS is a high-performance polymer known for its excellent dimensional stability, chemical resistance, and easy machinability. It is a unfilled grade of Polyphenylene Sulfide (PPS) and is ideal for a wide range of applications where precision and durability are required.Key features:Outstanding dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion make it easy to maintain tight tolerances.Easy machinability: this material can be machined to close tolerances, making it suitable for precise components.Corrosion resistance: due to its chemical resistance, this material is ideal for use in corrosive environments.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals and moistureEnhanced precision and dimensional stabilityImproved machinability and tight tolerance controlApplications:Structural parts in corrosive environments such as chemical processing and oil and gas industry.Precision components and machine parts that require dimensional stability, wear and chemical resistanceElectrical components, as it has good electrical insulation and dielectric properties.Automotive and aerospace components as it can withstand high temperatures.Techtron® 1000 is a versatile and reliable material that can help improve the performance and longevity of your products, it's available in a range of shapes and sizes, making it easy to incorporate into your designs.

Semitron® CMP XL20 Polyamideimide PAI shapes were specifically developed for CMP ring applications in the semiconductor and electronics industry, due to their excellent long wear life in CMP slurries. In addition to these characteristics, Semitron® CMP XL20 PAI components display high strength and stiffness, and outstanding wear resistance over a broad range of temperatures, making this grade the ideal solution for dynamic applications in process environments.Features:Specifically developed for CMP ring applications in the semiconductor and electronics industryExcellent long wear life in CMP slurriesHigh strength and stiffnessOutstanding wear resistance over a broad range of temperaturesBenefits:Ideal solution for dynamic applications in process environmentsSignificantly lower cost per waferOutperforms PPS up to 20x in most processesPromotes fewer edge defects and better uniformityApplications:CMP ring applications in the semiconductor and electronics industryCan be used in clamp rings, trench rings, screws, pins, and shower headsSuitable for use in centering pins, focus rings, insulators, vacuum pads, and wafer guides.

Techtron® HPV PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added wear resistance and strength of glass fiber reinforcement and internal lubrication. This compression-molded material is designed to excel in demanding environments and applications where wear resistance and dimensional stability are required.Key features:Superior wear resistance: internally lubricated and glass fiber-reinforced, allowing it to withstand high loads and minimize wear and tearOutstanding chemical and hydrolysis resistance: suitable for use in harsh environments and chemicalsExcellent dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerancesGreat electrical insulating and dielectric propertiesLow coefficient of friction and inherent low flammabilityGlass fiber reinforced: increased strength and stiffness, ideal for wear componentsFood grade availableBenefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion, and wearEnhanced precision and dimensional stabilityImproved electrical insulation and dielectric propertiesReduced friction and lower flammability riskMore cost-effective than advanced engineering plastics for certain applicationsApplications:Wear components such as bushings and bearings, CIP wash down parts, and pump, valve, and compressor applications in the aerospace, food processing, and oil and gas industries.Industrial equipment such as industrial drying and food processing ovens (bearings, rollers, etc.)Chemical process equipment (pump-, valve & compressor components)Electrical insulating systemsCost-effective alternative to advanced engineering plastics in certain applicationsTechtron® HPV is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, including food grade, making it easy to incorporate into your designs.

Duratron® T4203 PAI is a polyamide-imide material that offers exceptional strength and durability in high-tech equipment and structural applications. With features such as high impact strength, high elongation, and dimensional stability, it is a reliable choice for precision parts and components that require high performance in extreme conditions.Features:High impact strengthHigh elongationDimensional stabilityHigh temperature resistanceExceptional machinabilityBenefits:Able to withstand extreme conditions and loadsIdeal for precision parts and components in high-tech equipmentSuitable for structural applications such as linkages and seal ringsExcellent choice for wear applications involving impact loading and abrasive wearApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearPrecision parts in high-tech equipment

Semitron® ESd 420 PEI Polyetherimide electro static dissipative shapes exhibit high strength and stiffness, and excellent resistivity in the 10E5 to 10E8 ohms per square range. This grade in particular excels in high temperature environments, making it ideal for extreme structural applications in semiconductor and electronics markets.Features:High strength and stiffnessExcellent resistivity in the 10E5 to 10E8 ohms per square rangeSuitable for high temperature environmentsSurface resistivity: 106 - 109 ohms/sqBenefits:Ideal for extreme structural applications in semiconductor and electronics marketsOnly truly dissipative plastic product for use in high temperature applicationsCan withstand harsh conditions while maintaining its electrostatic propertiesApplications:Semiconductor and electronics industryHigh temperature structural applications such as in electronic components and equipment, where electrostatic discharge (ESD) protection is necessary.Can be used in electronic packaging, automotive, aerospace, and other industries where static control is critical.

Fluorosint® 135 is an advanced polymer material that combines the excellent chemical resistance, low friction and high temperature properties of PTFE (polytetrafluoroethylene) with the added low coefficient of friction, strength, stiffness and high pressure velocity capabilities. This material is designed to excel in demanding applications where high performance and reliability are required.Key features:Low coefficient of friction: provides excellent wear and deformation resistanceHigh strength and stiffness: provides superior mechanical performance at elevated temperaturesPTFE base: provides excellent chemical resistance, low friction and high temperature propertiesStock shapes available: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Low coefficient of friction, making it ideal for seals, bearings, and washer applicationsImproved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear, impact and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsImproved reliability and safety in critical applications.Applications:Low friction seals, bearings and washer applicationsHigh-performance wear applications where extreme conditions are present such as high temperature, pressure and chemical exposureComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesComponents that need high chemical resistance, low friction, and high temperature properties such as valves, pumps, and heat exchangers.Fluorosint® 135 is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in stock shapes as well as custom shapes, it allows for efficient production and the ability to create complex geometries. It's also important to mention that the temperature and chemical resistance can vary depending on the grade of PTFE used as well as other additives, always consult with the manufacturer for the exact properties of the final material.

Duratron® U2100 PEI Polyetherimide shapes, a high-performance plastic that offers exceptional rigidity, dimensional stability, and a low Coefficient of Linear Thermal Expansion. With 10% glass-reinforcement, Duratron® U2100 PEI is a versatile and durable material that is suitable for a wide range of applications.Features:10% glass-reinforced for great rigidity and dimensional stabilityLow Coefficient of Linear Thermal ExpansionExcellent strength-to-weight ratio and tensile strengthBenefits:Versatile and durable material that can withstand harsh conditionsIdeal for semiconductor and electronics applications where dimensional stability and low thermal expansion is importantSuitable for a wide range of applicationsApplications:Semiconductor and electronics applicationsApplications that require dimensional stability and low thermal expansionDuratron® U2100 PEI is the perfect choice for those looking for a high-performance plastic that can withstand harsh conditions. Whether you are looking to improve the performance of your semiconductor and electronics applications or need a material that can withstand high temperatures and harsh environments, Duratron® U2100 PEI is the ideal solution. Try it today and experience the difference for yourself!

Duratron® D7000 PI Polyimide shapes - a high-performance material ideal for demanding applications that require exceptional thermal resistance, low wear and friction, strength, and impact resistance. With superior electrical and thermal insulation properties, outstanding mechanical performance, great chemical resistance, and outstanding dimensional stability, Duratron® D7000 PI is an ideal solution for designs that reduce weight, extend service life, and reduce overall costs.Features:Superior electrical and thermal insulation propertiesOutstanding mechanical performanceGreat chemical resistanceHigh strength and toughnessOutstanding dimensional stabilityBenefits:Ideal for designs that reduce weightExtends service life before maintenance or replacementReduces overall costs by increasing process uptimeApplications:AerospaceTransportationIndustrialDuratron® D7000 PI is available in stock shapes and direct formed parts, perfect for smaller series and designs where tolerances and geometry of the end part require machining. The material is also available in Hot Compression Molded (HCM) shapes, providing designers with the greatest economy and flexibility.

KyronMAX® S-4240 is an advanced polymer material that combines the excellent strength, stiffness, and thermal resistance of PPA (polyphenylsulfone) with the added strength and stiffness of ultra high-strength carbon fiber. This injection molding compound is designed to excel in demanding applications where high strength, stiffness, thermal stability, and chemical resistance are required.Key features:Ultra high strength: carbon fiber reinforcement provides added strength and stiffnessPPA base: provides excellent thermal stability, dimensional stability and chemical resistanceInjection molding pellets: allows for easy incorporation into your designs and efficient productionHigh temperature resistance: able to maintain stability and strength in high temperature environments.Benefits:Improved strength and stiffness of components in demanding environments and high temperaturesIncreased resistance to wear and tear and high temperaturesEnhanced performance and durability of your products in high temperature and chemical environmentsPossibility to design and manufacture complex geometriesApplications:High strength structural components in the automotive, aerospace, and industrial industries, where high temperature and chemical resistance is requiredComponents that require high strength and stiffness, such as gears, bearing components, and bushings in high temperature environmentsIndustrial and manufacturing equipment where high strength and stiffness is needed, such as in high temperature environments and chemical processesElectrical and electronic components where high temperature, chemical and dimensional stability is neededKyronMAX® S-4240 is a versatile and reliable material that can help improve the performance and longevity of your products. It's only available in injection molding pellets form, it allows for efficient production and the ability to create complex geometries. Please note that no stock shapes are offered. It's important to mention that the carbon fiber content can vary, always consult with manufacturer for the exact content and its effect on the properties of the final material.

Duratron® T4503 PAI Polyamide-imide is a compression molded material that offers exceptional electrical insulation properties and excellent dimensional stability. This grade is often selected for extreme applications where large geometries are required, such as dies or thermal insulators. It has a similar composition to Duratron® T4203 PAI and is known for its high compressive strength, elongation, and impact resistance.Features:Outstanding electrical insulation propertiesExcellent dimensional stabilityHigh compressive strength and elongationImpact resistanceBenefits:Suitable for extreme applications such as dies and thermal insulatorsCan be used for large geometriesCan be used for electrical connectors and insulatorsApplications:Electrical connectors and insulatorsStructural components such as linkages and seal ringsWear applications involving impact loading and abrasive wearHigh Temperature Electrical ConnectorsBearing CagesCan Mandrel

Ertalyte® is a high-performance polyethylene terephthalate polyester (PET) produced by Mitsubishi Chemical Advanced Materials. With its exceptional wear resistance, low coefficient of friction, high strength, and resistance to moderately acidic solutions, Ertalyte® is the ideal material for applications that require sustained high loads and high-temperature performance.Features:Excellent wear resistanceLow coefficient of frictionHigh strength and toughnessResistant to moderately acidic solutionsRetains more of its original strength up to 180° F / 85° C than nylons or acetalsBenefits:Capable of sustaining high loadsIdeal for applications requiring high-temperature performanceExtends the service life of componentsLow maintenance and repair costsSuitable for use in harsh environmentsApplications:PharmaceuticalFood processing and packagingOil and gasBearings and structural applicationsAny application requiring high load and high-temperature performance.

Techtron® PSGF PPS is a high-performance polymer that combines the excellent chemical and corrosion resistance of Polyphenylene Sulfide (PPS) with the added strength and stiffness of glass fiber reinforcement. This compression-molded material is designed to excel in structural applications where dimensional stability and resistance to harsh environments are required.Key features:Extreme dimensional stability: minimal moisture absorption and low coefficient of linear thermal expansion, making it easy to maintain tight tolerances.Chemical and corrosion resistance: suitable for use in demanding environments and harsh chemicals.Glass fiber reinforced: increased strength and stiffness, ideal for structural componentsHigh temperature resistance: can withstand high temperatures and maintain stability.Benefits:Improved performance and durability of components in demanding environmentsIncreased resistance to chemicals, corrosion and wearEnhanced precision and dimensional stabilityImproved strength and stiffnessApplications:Structural components such as pump housings, valves, and compressors in the oil and gas industryAutomotive and aerospace components as it can withstand high temperatures.Industrial and chemical processing applications where chemical resistance and dimensional stability is needed.General structural components where increased strength and stiffness is neededTechtron® PSGF is a versatile and reliable material that can help improve the performance and longevity of your products. It's available in a range of shapes and sizes, making it easy to incorporate into your designs.