Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 2000.0 | MPa | ISO 178 |
Flexural Stress (3.5% Strain) | 54.0 | MPa | ISO 178 |
Tensile Modulus | 1900.0 | MPa | ISO 527 |
Tensile Stress at Yield | 45.0 | MPa | ISO 527 |
Tensile Strength at Break | 42.0 | MPa | ISO 527 |
Tensile Elongation at Break | 13.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 190.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 15.0 | kJ/m² | ISO 179/1eA |
Ball Indentation Hardness (H132/30) | 77.0 | MPa | ISO 2039-1 |
Value | Units | Test Method / Conditions | |
Density | 1210.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 97.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 104.0 | °C | ISO 75-1/-2 |
Value | Units | Test Method / Conditions | |
Moisture Content | max. 0.15 | % | — |
Value | Units | Test Method / Conditions | |
Melt Temperature | 180 - 230 | °C | — |
Mould Temperature | 40 - 80 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 3.5 | cm³/10min | ISO 1133 |
MVR Temperature | 210.0 | °C | — |
MVR Load | 2.16 | kg | — |
Shrinkage (24h) | 0.8 - 1.1 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In an air circulatIng dryer 60-90 °C for 2-4 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.