Knowde Enhanced TDS
Identification & Functionality
- Additives Included
- Chemical Family
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Typical Properties
- Processing Information (Injection Molding)
- Rheological Properties
| Value | Units | Test Method / Conditions | |
| Flexural Modulus | 1400.0 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 35.0 | MPa | ISO 178 |
| Tensile Modulus | 1400.0 | MPa | ISO 527 |
| Tensile Stress at Yield | 30.0 | MPa | ISO 527 |
| Tensile Elongation at Yield | 3.7 | % | ISO 527 |
| Tensile Elongation at Break | 35.0 | % | ISO 527 |
| Impact Strength (Charpy, at 23°C) | no break | kJ/m² | ISO 179/1eU |
| Notched Impact Strength (Charpy, at 23°C) | 30.0 | kJ/m² | ISO 179/1eA |
| Ball Indentation Hardness (H132/30) | 55.0 | MPa | ISO 2039-1 |
| Value | Units | Test Method / Conditions | |
| Density | 1190.0 | kg/m³ | ISO 1183 |
| Value | Units | Test Method / Conditions | |
| Vicat B50 | 80.0 | °C | ISO 306 |
| HDT / A (1.8 MPa) | 70.0 | °C | ISO 75-1/-2 |
| Value | Units | Test Method / Conditions | |
| Moisture Content | max. 0.15 | % | — |
| Value | Units | Test Method / Conditions | |
| Melt Temperature | 180 - 230 | °C | — |
| Mould Temperature | 40 - 80 | °C | — |
| Value | Units | Test Method / Conditions | |
| Melt Index (MVR) | 11.0 | cm³/10min | ISO 1133 |
| MVR Temperature | 210.0 | °C | — |
| MVR Load | 2.16 | kg | — |
| Shrinkage (24h) | 0.6 - 0.9 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In an air circulatIng dryer 50-80 °C for 2-4 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.