Products

MOCOM Compounds ALCOM® LB ECO PC 1000 17152 UV IM WT2083-07 is a polycarbonate base polymer, which is impact modified, UV stabilized, and contains recycled material. It is suitable for electrical and electronic, lighting, and various other applications such as light guides, lamps, sockets, etc. It can be processed through injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® LB PBT FC 2015 17125 BL1118-17 is a Polybutylene Terephthalate base polymer containing 15% glass fibers and is blue in color. It is opaque and is used in the electrical and electronic, medical/personal care market segments for light blocking components. Typical applications include injection molded parts.

MOCOM Compounds Alcom® LD PC 1000 18002 CC1001-18 is a polycarbonate base polymer with a special filler/additive system that provides translucency, high light transmission, light scattering, and good flow. It is approved by GS93016 and is suitable for applications in lighting and light transparent components, such as lamp covers, display elements, and operating elements. For processing, injection molding should be used with a melt temperature of 270-300°C and a mold temperature of 80-100°C. The product must be pre-dried at 120°C in a dry air (dessiccant) dryer for 2-3 hours with a maximum moisture content of less than 0.02%.

MOCOM Compounds ALTECH® ECO PC 1000/128 UV is a UV-stabilized polycarbonate that has been pre-dried under 120°C in a dry air (dessiccant) dryer for 2-3 hours and in an air circulating dryer between 100-120°C for 4-12 hours, depending on the moisture content, with a maximum moisture content of less than 0.02%. It is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It is suitable for exterior parts, light transparent components, injection molded parts, and various other lighting, electrical, and electronic applications such as lamp covers, housings, and more.

MOCOM Compounds ALCOM® LB ECO PC 1000 17157 FR IM WT2083-07 is a polycarbonate base polymer with special features including impact modification, UV stabilization, flame retardancy, and containing recycled material. It is suitable for electrical and electronic, lighting applications such as light guides, lamps, sockets, and various other applications. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, 120°C in an air circulating dryer for 4-12 hours, and maximum moisture content should be <0.02%. For injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® LDX PC 1000 UV 14062 WT1140-14 is a translucent, light-scattering extrusion grade polycarbonate with a special filler and UV stabilized additive system. It is suitable for applications such as lighting, light-transparent components, and lamp covers. Pre-drying involves 120°C in a dry air (dessiccant) dryer for 2-4 hours, or 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of less than 0.02%. Processing requires a melt temperature of 240-280°C and should be protected from light.

MOCOM Compounds ALTECH® ECO PC 1000/121 UV IM is a polycarbonate-based impact-modified, UV-stabilized plastic containing recycled material. It is suitable for the electrical and electronic, lighting, and various market segments and is typically used to produce housings, lamps, sockets, and various exterior parts and fixtures/fittings.

MOCOM Compounds ALTECH® ECO PC 1000/141 is a polycarbonate base polymer that offers UV stabilization, easy release (demolding), flame retardant, and impact modified properties for injection molded parts in the electrical and electronic, lighting, and various markets. It is recommended to pre-dry the material before processing. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR IM is a polycarbonate base polymer with features like UV stabilization, easy release, flame retardance, and impact modification. It is widely used in injection molded parts such as housings, security engineering parts, sockets, plugs, and connectors for the electrical and electronic and lighting industries.

MOCOM Compounds ALCOM® 3D TCE PC 5020 16116 is a polycarbonate-based polymer with 20% special filler that has increased thermal conductivity, is antistatic, and is heat stabilized. It is used in the Lighting, electrical and electronic market segment and is applicable for Extrusion of 3D printable FDM filaments for functional components. Processing Injection molding Filament extrusion melt temperature should be 250-270°C, and recommendations for 3D printing depending on printer type are nozzle temperature of 300-320°C, bed temperature of 80-120°C, and print speed of 10-60 mm/s.

MOCOM Compounds ALCOM® LDX PC 1000 UV 15064 CC1125-15 is a polycarbonate extrusion grade with a special filler and UV stabilized additive system. It is translucent and has high light diffusion and light scattering properties, making it suitable for use in lighting, light transparent components and lamp covers. For pre-drying, conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h, with a maximum moisture content of <0.01%. The extrusion melt temperature should be between 240-280°C.

MOCOM Compounds ALCOM® LDX PC 1000 UV 16069 GY1080-16 is a polycarbonate base polymer filled with a special filler system and UV stabilized. It is translucent, light scattering, and has high light diffusion. This extrusion grade is suitable for use in the lighting market for lamp covers and light transparent components. Processing extrusion should be done at a melt temperature of 240-280°C and it should be stored dry and protected from light.

MOCOM Compounds ALCOM® LB PBT FC 2015 17077 BL1070-17 is a pre-dried polybutylene terephthalate containing 15% glass fibers, special filler, and a blue, opaque color. It is used for light blocking components in electrical and electronic applications. For injection molding, a melt temperature of 250-270°C and a mold temperature of 80-120°C is required. To ensure optimal performance, this product should be protected from light, with a maximum moisture content of <0.02%.

MOCOM Compounds ALCOM® PC 740/36 FR UV CC1209-09LD is a polycarbonate base polymer containing a special filler and halogen-free flame retardant, with UV stabilization and light scattering and processing stabilization. It is suitable for automotive, lighting, electrical and electronic applications and is best suited for display elements, operating elements, and light transparent components. Pre-drying should be done at 120°C in a dry air (dessiccant) dryer for 2-4 h, 120°C in an air circulating dryer for 4-12 h, and the maximum moisture content should be <0.02%. For processing injection molding, the melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® LB PBT FC 2015 17076 GY1069-17 is a gray, opaque, food contact polybutylene terephthalate (Base Polymer) with 15% glass fibers, special filler (Filler/Additive System) designed specifically for light blocking components (Application Area) in the electrical and electronic market segment. It is typically processed through injection molding with a melt temperature of 250-270°C and a mold temperature of 80-120°C. Pre-drying Conditions should be done in a dry air (dessiccant) dryer at 100-120°C for 2-4 hours, or in an air circulating dryer at 100-120°C for 4-8 hours, with a maximum moisture content of <0.02%.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR is a polycarbonate base polymer with special features such as UV stabilization, easy release (demolding), and flame retardant impact modification. It is suitable for pre-drying conditions in an air circulating dryer at 100-120°C for 4-12 hours, or 120°C in a dry air (dessiccant) dryer for 2-3 hours, dependent on the moisture content with a maximum moisture content of 0.02%. It can be used for applications in the electrical and electronic, lighting, and various markets such as housings, security engineering parts, sockets, plugs/connectors, and various others.

MOCOM Compounds ALTECH® PC B 1000/576 is a polycarbonate base polymer that can be processed using injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It offers easy release (demolding) features and is used in lighting, building and construction, and various market segments. For pre-drying conditions, it should be dried in a dry air (dessiccant) dryer at 120°C for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours depending on moisture content, with a maximum moisture content of <0.02%. It should be stored in a dry, light-protected environment not exceeding 30°C for optimal performance.

MOCOM Compounds ALCOM® PC 730/3.1 UV WT1283-09LDM is a polycarbonate-based extrusion grade material with a special filler/additive system containing UV stabilizers, antioxidants, and light scattering properties, resulting in a low gloss finish. It is suitable for use in lighting applications and is typically used for lamp covers. The melt temperature range for extrusion is 240-280°C.

MOCOM Compounds ALTECH® PS-HI A 1000/100 is a Polystyrene-based injection molding grade with high impact properties and is suitable for applications such as light switches, functional components and various fixtures/fittings in market segments such as lighting, packaging, and various. Pre-drying conditions vary depending on moisture content, but can include a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding requires a melt temperature of 180-260°C and a mold temperature of 10-70°C. For optimal results, it should be stored in a dry place, protected from light, and not above 30°C.

MOCOM Compounds ALTECH® ECO PC 1000/521 IM UV is a polycarbonate base polymer with UV stabilization, easy release (demolding) and impact modification. It is suitable for pre-drying conditions at 120°C in a dry air (dessiccant) dryer for 2-4 hours or in an air circulating dryer at 100-120°C for 4-12 hours depending on moisture content (max. moisture content <0.02%). It has multiple market segments, including electrical and electronic, lighting, and various, and is suitable for exterior fixtures/fittings and various garden equipment and housings. To ensure optimal performance, it should be kept out of direct sunlight.

MOCOM Compounds ALTECH® ECO PA66 2030/510 GF30 IM is a polyamide 66 injection molding grade with 30% glass fibers, heat-stabilized, impact-modified, and easy-release (demolding). It is suitable for various market segments such as lighting and domestic appliances. Pre-drying conditions should be 80°C in a dry air (desiccant) dryer for 2-12 hours depending on moisture content, with a maximum moisture content of 0.15%. Processing injection molding requires a melt temperature of 280-300°C and a mold temperature of 80-120°C.

MOCOM Compounds ALCOM® LD2 PC 1000 17150 UV GY2240-08 is a polycarbonate base polymer with special features such as impact modification, UV stabilization, and the inclusion of recycled material with light scattering capabilities. It is used in electrical and electronic, lighting, and various exterior parts, fixtures/fittings, and electrical component applications such as housings, lamps, sockets, and more.

MOCOM Compounds ALCOM® TCE PC 5040 16090 is a polycarbonate-based polymer with a special filler/additive system that has thermal, electrical and heat stability properties. It is suitable for the Lighting, Electrical and Electronic market segment and its application areas include lighting, energy management, electrical and electronic (E&E), and electrical components.

MOCOM Compounds ALCOM® LB PC+ABS 1000 19037 RD1036-19 is an injection molding grade polymer blend of polycarbonate and Acrylonitrile Butadiene Styrene that is highly reflective and opaque. It is used in automotive, electrical and electronic, and lighting market segments for applications such as light guides and reflectors. During processing injection molding, a melt temperature of 250-280°C and mold temperature of 70-100°C should be maintained. After processing, the material should be stored in a dark environment to protect it from light.

MOCOM Compounds ALCOM® LB ECO PC+ABS 1000 SL WT1023-21 is a pre-dried injection molding grade with a polycarbonate + acrylonitrile butadiene styrene blend. It is highly reflective, contains recycled material, has anti-squeak modifications, and is opaque. It is used in the automotive, electrical and electronic, and lighting markets and is typically used for light guides and reflectors. When processing injection molding, the melt temperature should be 240-280°C and the mold temperature should be 70-100°C.

MOCOM Compounds ALCOM® PC 740/34 UV FR WT1147-09LD2 is a polycarbonate base polymer with a special filler, halogen-free flame retardant, and UV stabilizer. It has light scattering and high light diffusion properties, as well as good flow and processing stabilization. This material is mainly used in the automotive, lighting, electrical and electronic market segments for applications such as lamp covers, display elements, and operating elements. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® LB ECO PC 1000 17153 WT2687-16 is a polycarbonate-based, impact modified, UV stabilized, and recycled material containing product, typically used in lighting, light blocking components, and various other applications such as light guides, lamps, and sockets. It should be processed with a melt temperature of 270-310°C and mold temperature of 80-110°C. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of less than 0.02%.

MOCOM Compounds ALTECH® ECO PC 1000/128 is a UV-stabilized polycarbonate base polymer with easy release (demolding) characteristics. It is suitable for pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours, depending on moisture content, with a maximum moisture content of <0.02%. It is suitable for applications including exterior parts, light transparent components and injection molded parts, and is commonly used for lamp covers, housings, and various other products. It should be stored dry, protected from light, and kept away from direct sunlight.

MOCOM Compounds ALCOLOR® PMMA A WT949-1842 is a Polymethylmethacrylate-based colorant with a color of white, free from cadmium, lead, and diarylide pigments, dust-free, high dispersibility, high additive content, and is suitable for use in lighting, furniture, building and construction, cosmetics, jewelry, and injection-molded parts.

MOCOM Compounds ALTECH® PA6 A 4030/109 MR30 is a Polyamide 6 grade containing a 30% mineral filler/additive system and heat stabilized for improved flow characteristics during injection molding. It is suitable for a wide range of automotive, machinery, electrical and electronic, furniture, building and construction, sport and leisure, packaging, medical/personal care, lighting, and information technology applications. Typical applications include racking/shelving, airbag components, batteries, fixing elements, power drills, clips, roof boxes and more. Processing conditions should include a melt temperature of 270-290°C and a mold temperature of 80-100°C for optimal performance, while pre-drying conditions should include 80°C in a dry air (dessiccant) dryer for 2-12 hours, depending on the moisture content.

MOCOM Compounds ALCOLOR® PC FC WT1040-11TL is a colorant for use in polycarbonate with a dosage of 3.0% for extrusion and 3.0% for injection molding depending on wall thickness and required color intensity and depending on application and operational area. It has a blue woolscale 8 light fastness colorant and a white, translucent base polymer. It is free from cadmium, lead, and diarylide pigments, dust-free, and has high dispersibility. It is suitable for use in lighting, electrical, and electronic applications and is suitable for both extruded and injection molded parts.

MOCOM Compounds ALTECH® PA6 A 1000/126.01 UV is a heat and UV stabilized polyamide 6 base polymer suitable for injection molding. It is suitable for lighting fixtures/fittings and exterior applications such as housings and fans. It should be stored in a dry and light-protected environment, not exceeding 30°C.