company tower banner

ALCOM® TCE PC 5040 16090

MOCOM Compounds ALCOM® TCE PC 5040 16090 is a polycarbonate-based polymer with a special filler/additive system that has thermal, electrical and heat stability properties. It is suitable for the Lighting, Electrical and Electronic market segment and its application areas include lighting, energy management, electrical and electronic (E&E), and electrical components.

Brand: ALCOM (363 products)

Polymer Name: Polycarbonate (PC)

Processing Methods: Injection Molding

Fillers Included: Proprietary

Chemical Family: Polycarbonate (PC)

Additives Included: Heat Stabilizer

Labeling Claims: Azo Colorants-free, Azo Dyes-free, Conflict minerals-free, PAH-free, PFOA-free, PFOS-free, Persistent Organic Pollutants (POP)-free

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Additives Included: Heat Stabilizer
Chemical Family: Polycarbonate (PC)
Fillers Included: Proprietary
Polymer Name: Polycarbonate (PC)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Engineering & Specialty Polymers
Polycarbonates

Features & Benefits

Labeling Claims: Azo Colorants-free,
Azo Dyes-free,
Conflict minerals-free,
PAH-free,
PFOA-free,
PFOS-free,
Persistent Organic Pollutants (POP)-free
Materials Features: Electrically Conductive,
Good Thermal Conductivity,
Heat Stabilized,
High Anisotropy,
Thermally Conductive

Applications & Uses

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Devices & Assemblies
Lighting
Electrical & Electronics — Parts & Components
Sensors & Actuators
Plastics & Elastomers End Uses: Electrical Components,
Electrical/Electronic Applications,
Energy Management,
Heat Sinks
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties


	Value	Units	Test Method / Conditions
Tensile Modulus	6800.0	MPa	ISO 527
Tensile Strength at Break	38.0	MPa	ISO 527
Tensile Elongation at Break	0.8	%	ISO 527
Impact Strength (Charpy, at 23°C)	5.0	kJ/m²	ISO 179/1eU

Physical Properties


	Value	Units	Test Method / Conditions
Density	1450.0	kg/m³	ISO 1183

Thermal Properties


	Value	Units	Test Method / Conditions
Vicat B50	145.0	°C	ISO 306
HDT / A (1.8 MPa)	140.0	°C	ISO 75-1/-2
Thermal Conductivity (integral)	5.0	W/(m K)	ISO 22007-2
Specific Heat Capacity	4.8	J/gK	-
Thermal Conductivity (in-plane)	10.0	W/(m K)	ASTM E 1461
Thermal Conductivity (through-plane)	1.8	W/(m K)	ASTM E 1461

Typical Properties


	Value	Units	Test Method / Conditions
Moisture Content	max. 0.02	%	-

Electrical Properties


	Value	Units	Test Method / Conditions
Surface Resistance	max. 500	Ohm	IEC 62631-3-2

Flammability


	Value	Units	Test Method / Conditions
Flammability (3.0 mm)	V - 0	class	UL 94
Glow Wire (GWFI, 650°C, 2mm)	Passed	-	DIN EN 60695

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Mould Temperature	100 - 130	°C	-
Melt Temperature	300 - 330	°C	-

Rheological Properties


	Value	Units	Test Method / Conditions
Shrinkage (Lengthwise, 24h)	0.1 - 0.3	%	ISO 294-4
Shrinkage (Lateral, 24h)	0.1 - 0.3	%	ISO 294-4
Spiral Flow (2 mm wall thickness)	10.0	cm	-

Regulatory & Compliance

Certifications & Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS),
EC No.1907/2006,
IATF 16949,
ISO 13485,
ISO 14001,
ISO 17025,
ISO 45001,
ISO 50001,
ISO 9001,
REACH (Europe),
REACH (UK),
RoHS Compliant,
SVHC Compliant

Technical Details & Test Data

Pre-Drying Conditions: 120 °C in a dry air (dessiccant) dryer for 2-4 h

Storage & Handling

Storage Conditions: Store in dry, protected from light.