Products

MOCOM Compounds ALTECH® PP-B B 4915/500 MR15 is a heat-stabilized and processing-stabilized polypropylene heterophasic copolymer blended with 15% talcum. It is suitable for injection molding with a melt temperature between 200-250°C and a mold temperature between 20-70°C, making it ideal for applications in the automotive industry for interior decoration/finishing, clothing/fasteners, and functional components, housings. Pre-drying should be done in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or in an air circulating dryer at 80-120°C for 2-4 hours. This product should be stored in a dry and light-protected environment not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 1000/546 FR is a flame retardant polypropylene homopolymer that is processed using injection molding with a melt temperature of 200-240°C and a mold temperature of 20-70°C. It is known for its easy flow, easy release (demolding), and heat stabilized properties. It is commonly used in the electrical and electronic, building and construction market segments for injection molded parts, electrical components, and clothing/fasteners, with typical applications including fixing elements, functional components, and housings.

MOCOM Compounds Alcom® CFX ABS 1000 UV 17058 SV1049-17MC is a UV-stabilized acrylonitrile/butadiene/styrene copolymer base polymer that features a metallic effect. It is designed for injection-molded parts, particularly housings and clothing/fasteners. To maintain its properties, it should be stored in dry conditions and protected from light and UV radiation.

MOCOM Compounds ALTECH® PP-B A 4815/510 MR15 IM is a polypropylene heterophasic copolymer that is processed by injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 15% chalk and has special features such as impact modification, injection molding grade, heat stabilization, easy release (demolding), and processing stabilization. It is used in electrical and electronic, automotive, and other applications such as electrical components, interior decoration/finishing, clothing/fasteners, functional components, fixing elements, and housings.

MOCOM Compounds ALTECH® PP-H A 3020/100 GB20 is a Polypropylene Homopolymer with 20% glass beads, heat stabilized, easy release (demolding), and processing stabilized. It is suitable for building and construction, automotive, packaging, and injection molded parts, exterior parts, clothing/fasteners, and interior decoration/finishing applications. Pre-drying conditions are in a dry air (dessiccant) dryer 80-120°C for 2-3 hours, or an air circulating dryer 80-120°C for 2-4 hours. Processing Injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be dry and stored in a cool place, not above 30°C.

MOCOM Compounds ALCOM® CFX ABS+PC 1000 UV 19004 is a modified Acrylonitrile/Butadiene/Styrene/Copolymer with polycarbonate and UV stabilized filler/additive system designed to give a special metallic effect and good flow. It is suitable for injection molding applications in the automotive, building and construction industries, and is used for housing and clothing/fastener applications.

MOCOM Compounds ALTECH® PP-H A 4920/108 MR20 is a polypropylene homopolymer heat stabilized, easy release (demolding) and processing stabilized, suitable for injection molding with a melt temperature of 200-250°C and mold temperature of 20-70°C. It is suitable for automotive, electrical, and electronic applications like housings, functional components, interior decoration/finishing, and clothing/fasteners. To maintain its quality, keep it dry and protected from light at temperatures not exceeding 30°C. Pre-drying conditions should be in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or in an air circulating dryer at 80-120°C for 2-4 hours.

MOCOM Compounds ALTECH® PBT+ASA A 2020/510 GF20 is an impact-modified, low-warpage, easy-flow polybutylene terephthalate + acrylonitrile styrene acrylate with a glass fiber filler/additive system. Pre-drying conditions require a dry air (desiccant) dryer at 80-120°C for 2-4 hrs depending on moisture content, with a maximum moisture content of <0.04%. Processing temperature for injection molding is 250-270°C and 60-100°C for the mold temperature. Typical applications include interior decoration/finishing, clothing/fasteners, and various other applications. It is ideal for applications requiring high mechanical strength, chemical resistance and heat stability.

MOCOM Compounds ALCOM® HM PC+ABS 1000 AG 16152 is a hygienic material with antibacterial properties according to ISO 22196 in its natural color. It is designed for packaging, personal care, household goods, furniture, building and construction, and sport and leisure applications. It is suitable for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners, handles, profiles, etc.

MOCOM Compounds ALTECH® PBT+ASA A 4212/507 MR/GF12 is a polybutylene terephthalate + acrylonitrile styrene acrylate with 12% glass fiber/mineral filler/additive system. It is pre-dried in a dry air (dessiccant) dryer at 90-115°C for 2-4 hours, depending on moisture content, with a maximum moisture content of <0.04%. During injection molding, the melt temperature should be set between 250-280°C and the mold temperature between 60-100°C. This material has low warpage, easy flow, impact modified, and heat stabilized properties, making it suitable for interior decoration/finishing, clothing/fasteners, and various other applications.

MOCOM Compounds ALTECH® PA6 B 1000/170 is a polyamide 6 base polymer that solidifies quickly and is easy to demold. It is heat and processing stabilized, making it suitable for injection molding with melt temperatures between 250-270°C and mold temperatures between 40-80°C. This polymer is suitable for use in the automotive, machinery, building and construction, and sport and leisure markets. It can be used for injection molded parts, clothing/fasteners, and for housings and functional components.

MOCOM Compounds ALTECH® PP-H A 1000/140 FR GY1071-14LS is a polypropylene homopolymer with a filler/additive system of laser optimization and special features of laser etchable (dark etching), processing stabilized, easy release (demolding), and heat stabilized. It is suitable for electrical and electronic applications such as injection molded parts, clothing/fasteners, and electrical components and is commonly used for functional components and housings.

MOCOM Compounds ALTECH® NXT PP -H A 2330/456.02 GF20 GB10 CP is a polypropylene homopolymer with 20% glass fibers and 10% glass beads that is chemically coupled, high heat stabilized, high stiffness, low emission, and heat stabilized. It is suitable for pre-drying conditions in an air circulating dryer at 80-120°C for 2-4 hours and in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours. It can be processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material is suitable for automotive applications such as clothing/fasteners and functional components.

MOCOM Compounds ALCOM® PC 740/4 UV SV1287-04MCS is a polycarbonate-based material with a UV stabilized filler/additive system that has a metallic effect and easy flow properties. It is typically used for housings and applications such as clothing/fasteners and domestic appliances in the automotive, building and construction market segments.

MOCOM Compounds ALCOM® PC 740/1 SV1115-08MCF is a polycarbonate injection molding grade with a metallic effect and low tendency to flow lines. It is suitable for use in the automotive, building and construction markets. Pre-drying is recommended in a dry air (dessiccant) dryer at 100-120°C for 2-3 h depending on moisture content, with a maximum moisture content of 0.02%. For injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used. Additionally, it should be stored in the dark.

MOCOM Compounds ALTECH® ABS A 1000/667 is a Base Polymer made of Acrylonitrile/Butadiene/Styrene/Copolymer that features improved surface, low gloss, and heat stabilization. It is used in the Automotive Market Segment for injection molded parts and clothing/fasteners. Pre-drying Conditions require 80°C in a dry air (dessiccant) dryer for 2-4 h and 80°C in an air circulating dryer for 3-6 h, depending on moisture content, with a maximum moisture content of <0.20%. For Processing Injection molding, a melt temperature between 200-240°C and a mold temperature between 50-80°C is recommended. Additionally, it should be stored dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 2040/652 GF 40 UV CP is a Polypropylene Homopolymer pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours, or an air circulating dryer at 80-120°C for 2-4 hours. It is processed using Injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 40% glass fibers and is chemically coupled, UV stabilized, easy release (demolding), slip agent and heat stabilized. These features make it suitable for machinery, building and construction, and it is typically used for injection molded parts, clothing/fasteners and gardening tools.

MOCOM Compounds ALTECH® PA6 B 2030/500 GF30 is a polyamide 6-based polymer with a 30% glass fiber filler/additive system. It is glycol, hot oil, and chemically resistant, has good flow, easy release properties, and is highly heat stabilized. This polymer is suitable for automotive, building and construction, and machinery applications, and can be used in the manufacturing of engine and drive systems, injection molded parts, clothing/fasteners, and exterior parts. Typical applications include different automotive powertrain parts, oil pans/sumps, and functional components, as well as housings.

MOCOM Compounds ALTECH® PP-B A 2030/150 GF30 CP is a heterophasic copolymer made of polypropylene and 30% glass fibers, coupled together chemically and easy to remove. It is heat and processing stable, and is suitable for injection molding with melt temperatures of 200-250°C and mold temperatures of 20-70°C. It is most commonly used for automotive purposes such as functional components, powertrain parts, housings, fixing elements, interior and exterior decoration and finishing. To ensure optimal results, it should be pre-dried in a dry air (dessiccant) dryer or air circulating dryer at temperatures of 80-120°C for 2-4 hours.

MOCOM Compounds ALTECH® PA6 B 2015/100 GF15 is a polyamide 6-based product with 15% glass fibers, heat and processing stabilized, and easy release (demolding). It is suitable for building and construction, machinery, clothing/fasteners, and injection-molded parts applications. Pre-drying conditions must be 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content with a maximum moisture content of 0.15%. Processing temperature for injection molding should be between 270-290°C, mold temperature should be between 80-100°C, and it should be protected from light and stored at temperatures below 30°C.

MOCOM Compounds ALTECH® ABS A 1000/566 is a high heat stabilized, low gloss Acrylonitrile/Butadiene/Styrene/Copolymer suitable for injection molded parts, clothing, and fasteners in the automotive market. Pre-drying conditions include 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours depending on moisture content, with a maximum moisture content of 0.20%. The melt and mold temperatures for processing injection molding should be 200-240°C and 50-80°C respectively. Care should be taken to ensure that the temperature is not exceeded during processing.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALTECH® PP-H A 4920/107 MR20 is a polypropylene homopolymer that is processing stabilized, easy to release (demolding), heat stabilized, and is typically used for functional components, housings, injection molded parts, interior decoration/finishing, clothing/fasteners in the automotive, electrical, and electronic market segments.

MOCOM Compounds ALCOM® MS PP 4920 BK1248-20 is a Polypropylene Heterophasic Copolymer containing 20% talcum, which is heat stabilized, scratch resistant, UV stabilized, and impact modified. It is suitable for use in Automotive applications such as housings and clothing/fasteners. Pre-drying should be done in an air circulating dryer at 60-90°C for 2-4 hours, or in a dry air (dessiccant) dryer at 60-90°C for 2-4 hours depending on moisture content. For injection molding, the melt temperature should be set at 200-270°C and mold temperature at 20-70°C.

MOCOM Compounds ALTECH® ABS+PMMA A 1000/500 is a processing-stabilized, scratch-resistant polymer used for injection molded parts in various market segments, such as clothing/fasteners and bezels. It has a service temperature range of -40-85°C and a maximum shelf life of 24 months. Pre-drying conditions should be implemented before processing at a melt temperature of 220-260°C and a mold temperature of 50-80°C. The base polymer is polymethylmethacrylate and acrylonitrile/butadiene/styrene/copolymer. It should be stored dry and protected from light at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H B 4030/507 TV30 is a Polypropylene Homopolymer with a mineral filler/additive system that is UV stabilized, has easy release (demolding), processing stabilized, and heat stabilized properties. It is suitable for use in the Automotive market segment and is ideal for applications such as fixtures/fittings, exterior injection molded parts, and interior decoration/finishing. Typical applications include functional components, fixing elements, clothing/fasteners, and housings.

MOCOM Compounds ALTECH® ABS A 1000/227 UV is a special UV-stabilized Acrylonitrile/Butadiene/Styrene/Copolymer base polymer that is suitable for injection molding with melt temperatures between 200-240°C and mold temperatures between 50-80°C. This polymer is ideal for applications such as housings, clothing/fasteners, and building and construction. It is essential to pre-dry the polymer under conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content, with a maximum moisture content of 0.20%. Furthermore, it should be stored in a dry environment that is protected from light and not above 30°C.

MOCOM Compounds ALTECH® PP-B A 4920/500 MR20 is a polypropylene heterophasic copolymer with a filler/additive system of 20% talcum. It is heat and processing stabilized and has easy flow, release, and molding properties. It is suitable for automotive, sport and leisure, and building and construction applications such as gardening tools, exterior parts, interior decoration/finishing, clothing/fasteners, and sports equipment. Processing injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® HM PA6 1000 AG UV 15046 WT1077-15 is a pre-dried polyamide 6-based material with an additive system containing a hygienic material and light stabilizer. It is white in color, similar to RAL 9003 and RAL 9016, and has antibacterial properties according to ISO 22196. This material is suitable for use in personal care, household goods, furniture, building and construction, and sport and leisure applications. When processing with injection molding, the recommended melt temperature should be between 250-270°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALTECH® PP-B A 4915/500 MR15 is a polypropylene heterophasic copolymer with 15% talcum as a filler/additive system. It has high heat stabilization, processing stabilization, and easy release (demolding) characteristics. The melting temperature for injection molding is 200-250°C and the mold temperature is 20-70°C. This material is suitable for automotive, building and construction market segments with typical applications such as housings, fixing elements, functional components and interior decoration/finishing, gardening tools, clothing/fasteners and exterior parts. To ensure optimum performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® HM PA6 1000 SB1038-21 is a pre-dried polyamide 6 with a hygienic filler/additive system, colored black, with antibacterial properties according to ISO 22196. It is designed for automotive, personal care, electrical and electronic, furniture, building and construction, and sport and leisure applications, and is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C. Typical applications include sanitary articles, hygiene products, domestic appliances, functional components, housings, handles, fittings, and clothing/fasteners.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 14069 is a hygienic material composed of a Polyamide + Acrylonitrile Butadiene Styrene Blend, available in gray, similar to RAL 7015 and RAL 7042. It has antibacterial properties according to ISO 22196 and can be used for packaging, personal care, furniture, building and construction, and sport and leisure applications.

MOCOM Compounds ALTECH® PP-H A 2030/250 GF30 CP is a polypropylene homopolymer with a 30% glass fiber filler/additive system that is heat-stabilized, impact-modified, easy to release (demolding), processing-stabilized, and chemically coupled. This product is suitable for automotive, building, and construction market segments and is used for injection molded parts, interior decoration/finishing, clothing/fasteners, and exterior parts. Typical applications include functional components, housings, and seals. It offers high strength, stiffness, and excellent surface finish.

MOCOM Compounds ALTECH® PP-H A 4920/106 MR20 is a polypropylene homopolymer suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It contains 20% talcum and is heat stabilized, easy to release (demolding), and processing stabilized. This polymer is used in automotive, electrical and electronic applications such as injection molded parts, power tools, interior decoration/finishing, and clothing/fasteners. Typical applications include housings and functional components.

MOCOM Compounds ALCOM® HM ABS 1000 AG 14077 is a pre-drying Acrylonitrile/Butadiene/Styrene/Copolymer with hygienic material, light stabilizer, and natural color. It has antibacterial properties according to ISO 22196 and is used in the market segments of packaging, personal care, household goods, furniture, building and construction, and sport and leisure. It is mainly used in sanitary articles, hygiene products, domestic appliances, functional components, clothing/fasteners, housings, handles, and fittings.