Products

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1100-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and translucent, light scattering, and has high light diffusion. It has easy flow properties and is suitable for automotive, lighting, and light transparent components. Typical applications include lamp covers, display elements, and operating elements. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15003 CC1005-15 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized, providing high light transmission and light scattering, as well as high light diffusion, dependent on wall thickness and easy flow. It is suitable for automotive and lighting market segments, for applications such as lamp covers, display elements, and operating elements. Processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. This product is approved by GS93016 and should be stored in its original packaging.

MOCOM Compounds ALCOM® POM 770/1 SLBV is a polyoxymethylene copolymer with a special filler and improved sliding/wear and heat stabilized properties. It is typically used in functional components, bearings, and sliding elements in the automotive and machinery industry and can be processed using injection molding with a melt temperature of 180-220°C and a mold temperature of 60-90°C. Pre-drying should be done using either a dry air (dessiccant) dryer or an air circulating dryer at 100-110°C for 2-3 hours or 3-5 hours respectively, depending on the moisture content.

MOCOM Compounds ALCOM® PC 740/4 UV RD1231-08LD is a polycarbonate containing a special filler system with light scattering and high light diffusion properties, as well as being UV stabilized and having good flow. It is suitable for use in the automotive and lighting market segments and is typically used in applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® PC 740/4 UV OR1075-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light diffusion, and translucency similar to RAL 2003. It is UV stabilized and approved by GS93016, suitable for automotive and lighting segment applications such as lamp covers, display elements, and operating elements. For injection molding, the suggested melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 14068 GY1159-14 is a polycarbonate base polymer with a special filler/additive system that provides translucent, light scattering, high light diffusion, and easy flow properties. It is suitable for automotive and lighting applications, such as lamp covers, display elements, and operating elements, and is approved by GS93016. The processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored in a dry place and protected from light to ensure optimal performance.

MOCOM Compounds ALCOM® PC 740/4 GY1122-04LD is a polycarbonate base polymer with a special filler/additive system, featuring light scattering and high light diffusion, as well as good flow. It is used in automotive and lighting applications for lighting, light transparent components such as lamp covers, display elements, and operating elements. It has GS93016 approvals and is recommended to be pre-dried before injection molding processing at 270-310°C with a mold temperature of 80-110°C for best results.

MOCOM Compounds ALCOM® LD2 PC 1000 14050 GY1118-14 is a special filler-based polycarbonate with pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-4 h, 120°C in an air circulating dryer for 4-12 h, and a maximum moisture content of <0.02%. It features translucent, light scattering, and high light diffusion properties, making it suitable for Automotive and Lighting market segments, with typical applications including lamp covers, display elements, and operating elements. It is approved by GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV GY1076-10LD is a polycarbonate base polymer with a special filler/additive system designed to provide light scattering, high light transmission, and easy flow. It is UV stabilized and is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. For best results, the pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h, or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. The processing injection molding melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 RD1123-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering and translucency, making it suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. It has approval GS93016. To optimize performance, pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of less than 0.02%.

MOCOM Compounds ALCOM® PC 740/4 BL1435-07LD is a polycarbonate base polymer with a special filler/additive system which provides translucent, light scattering, and high light diffusion properties with good flow. This polymer is suitable for automotive lighting applications such as lamp covers, display elements, and operating elements, and has been approved by GS93016. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, and 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of 0.02%. Injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 WT1140-03LD is a polycarbonate base polymer with a special filler/additive system for light scattering, high light diffusion, high light transmission, and easy flow. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, operating elements, and light transparent components. Processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. It has been approved by GS93016 and should be stored in a dry place, away from direct sunlight, in order to preserve its quality.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 17187 BK1192-17 is a polycarbonate base polymer with a special filler/additive system, UV stabilized, that is translucent, light scattering and high light diffusion. It is used in automotive and lighting applications, primarily for light transparent components, Black Panel-Technology and typical applications such as display elements and operating elements.

MOCOM Compounds ALCOM® LD2 PC 1000 15054 GY1096-15 is a polycarbonate base polymer with a special filler/additive system that provides properties like translucent, light scattering, and high light diffusion, as well as good flow. It is suitable for applications like lamp covers, display elements, and operating elements in the automotive and lighting market segments. When injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used. It is approved by GS93016 and should be stored dry and protected from light.

MOCOM Compounds Alcom® TCD PA66 5050 14016 is a thermal conductive and electrically insulating polyamide 66 material that is heat stabilized. It is used in a variety of market segments including automotive, machinery, electrical and electronic, and lighting. Typical applications include radiator systems, cooling systems, housings, functional components, plugs/connectors, and lamp sockets.

MOCOM Compounds ALCOM® PC 740/4 UV WT1257-04LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering and high light transmission. It is used in automotive and lighting applications such as lamp covers, display elements, and operating elements, and is approved by GS93016. For optimal performance, injection molding should be done at a melt temperature of 270-310°C and mold temperature of 80-110°C. It is important to follow these instructions.

MOCOM Compounds ALCOM® PC 740/25 UV WT1445-06LD is a high heat polycarbonate with a special filler/additive system that provides light scattering, high light diffusion, high heat stabilization, UV stabilization, and easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting markets. Processing Injection molding should use a melt temperature of 320-340°C and a mold temperature of 100-120°C. The material should be processed immediately after pre-drying for optimal results.

MOCOM Compounds ALCOM® PC 740/4.19 WT1302-05LB is a polycarbonate base polymer containing a special filler/additive system with high reflectivity, opacity, and easy flow. It is suitable for applications in the automotive and lighting industry such as light guides, reflectors, and light blocking components. It should be processed using injection molding with a melt temperature of 280-320°C and a mold temperature of 80-110°C. For optimal results, it should be stored in a dry place, away from light, and protected from moisture.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 14019 WT1030-14 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, and high light diffusion characteristics. It is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. Injection molding of this polymer requires a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1090-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, high light diffusion, and good flow properties. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements and is approved by GMW15702 and GM3013.

MOCOM Compounds ALCOM® AWL 15/1 WT1471-04LB is a pre-dried Acrylonitrile/Butadiene/Styrene/Copolymer blend containing 15% special filler, which is highly reflective and opaque. It is designed for applications in the automotive and various market segments, such as lighting and light blocking components, light guides, and reflectors. The material should be processed using injection molding with a melt temperature of 220-260°C and a mold temperature of 50-80°C. It should not exceed a maximum moisture content of 0.02%.

MOCOM Compounds ALCOM® PC 740/4 UV WT1072-13LD is a polycarbonate base polymer filled with a special filler and UV stabilized for light scattering and high light diffusion to provide easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting market and has been approved by GS93016.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18045 WT1048-18 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and offers light scattering, translucent, easy release (demolding), and easy flow properties. It is ideal for automotive, lighting, and white panel-technology applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® HTC 300/1 WT1056-10LD is a high temperature copolyester base polymer which is pre-dried with 90°C in a dry air (dessiccant) dryer for 4-6 hours to a maximum moisture content of <0,03%. It is equipped with a special filler/additive system for light scattering and high light diffusion, and is intended to be utilized in the automotive and lighting market segments for lighting and light transparent components, such as lamp covers, display elements, and operating elements. The process of injection molding requires a melt temperature of 260-280°C and a mold temperature of 50-70°C. Additionally, the product should be stored in a dry and light-protected area.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18041 WT1078-12 is a polycarbonate base polymer with a special filler and UV stabilized additive system. It is translucent, providing high light diffusion and good flow, making it suitable for applications in automotive and lighting markets such as lamp covers, display elements, and operating elements. During processing, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1044-20 is a polycarbonate-based, injection molding grade resin with a special filler/additive system, good flow, processing stabilized, UV stabilized, and light scattering properties. This resin is used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements, and is suitable for black panel-technology and light transparent components. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature is 80-110°C. It is recommended to use a low pressure injection molding process.

MOCOM Compounds Alcom® LB PC 1000 14073 WT1164-14 is a polycarbonate-based injection molding grade polymer with a special filler/additive system that provides improved surface appearance and easy flow. This material is highly reflective and designed specifically for use in the automotive and lighting markets.

MOCOM Compounds Alcom® PWL 10/1 WT 41-913LB is an impact-modified polycarbonate designed for use in automotive and lighting applications. It contains 15% special filler that gives it a highly reflective, opaque appearance, making it ideal for light blocking components. It should be stored in a dry area and protected from light.

MOCOM Compounds ALCOM® AWL 109/10 WT1218-11LB is a base polymer - acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing a filler/additive system of 10% special filler and special features of being highly reflective, opaque, and highly heat-stabilized. It is suitable for use in the automotive and various market segments, primarily for use in lighting and light-blocking components such as light guides and reflectors.

MOCOM Compounds ALCOM® PP 620/1 WT1034-05LB is a base polymer of Polypropylene Homopolymer with a filler/additive system of 15% special filler and 15% mineral. It is highly reflective and opaque, making it suitable for applications such as light guides and reflectors, and is used in the automotive and lighting market segment. The pre-drying conditions involve being in a dry air (dessiccant) dryer or air circulating dryer set between 80-100°C for 2-4 hours with a maximum moisture content of <0.02%. The processing injection molding requires a melt temperature of 230-270°C and a mold temperature of 20-90°C.

MOCOM Compounds ALCOM® PC 740/4 BL1355-06LD is a polycarbonate base polymer with a special filler/additive system providing translucent, light scattering, and good flow properties. It is suitable for automotive, lighting, and light transparent components such as lamp covers, display elements, and operating elements, and has been approved by GS93016. The recommended processing injection molding temperature is 270-310°C, with a mold temperature of 80-110°C. For optimal performance, this material should be stored in a dry, light-protected environment.

MOCOM Compounds ALCOM® AWL 109/15 UV WT1217-11LB is a base polymer of acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing 15% special filler and special features of being highly reflective, opaque, UV stabilized, and highly heat stabilized. It is intended for use in the automotive and various market segments, primarily for lighting and light blocking components such as light guides and reflectors.

MOCOM Compounds ALCOM® PC 740/4 GY1156-04LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering and high light diffusion properties. It is used primarily in the automotive and lighting industry for applications such as lamp covers, display elements, and operating elements. It is approved under GS93016 and must be processed using an injection molding process with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds TEDUR® L 9903-1 is a base polymer composed of Polyphenylene Sulfide and 70% special filler, with special features of increased thermal conductivity, electrostatic dissipation, high density, and magnetisability. It is suitable for pre-drying conditions in a dry air (dessiccant) dryer at a temperature of 130-140°C for 2-4 hours, depending on moisture content and processing injection molding with a melt temperature of 320-340°C and a mold temperature greater than 140°C. This product is suitable for the automotive, machinery, electrical, and electronic market segments and is typically used for applications such as coil formers/bobbins. It is an ideal choice for high-heat applications.

MOCOM Compounds ALCOM® PC 740/4 BL1411-07LD is a polycarbonate-based compound with a special filler/additive system suitable for Automotive and Lighting applications. It requires pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-4 h and 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. Typical applications include lamp covers, display elements, and operating elements. It is approved under GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It should be stored in a dry place and protected from light, with the lid firmly secured after use.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16100 WT1125-16 is a polycarbonate-based resin containing a special filler and UV stabilized additive system for improved translucence, light scattering properties and flow. Suitable for injection molding, it has a melt temperature range of 270-310°C and mold temperatures of 80-110°C and is approved by GS93016. This resin is used in the automotive and lighting industries for applications such as lamp covers, display elements and operating elements.