Products

MOCOM Compounds ALCOM® PC 740/4 UV WT1257-04LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering and high light transmission. It is used in automotive and lighting applications such as lamp covers, display elements, and operating elements, and is approved by GS93016. For optimal performance, injection molding should be done at a melt temperature of 270-310°C and mold temperature of 80-110°C. It is important to follow these instructions.

WIPELAST TV 30 BK UV is a black polypropylene-EPDM composite material with 30% talc filler and UV stabilizers, specifically designed for use in the automotive industry. Prior to processing, the material must be pre-dried at 60-100°C in an air-circulating dryer for 2-4 hours, depending on the initial moisture content, to achieve a maximum moisture content of 0.10%. During processing, the melt temperature should be maintained at 200-270°C, with a mold temperature of 20-60°C during injection molding.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 16104 WT2288-09TL is a polycarbonate base polymer filled/additive system with UV stabilizers and light scattering special features for the Automotive and Lighting market segments. Its typical applications include lamp covers, display elements, and operating elements, and it has been approved by GS93016. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of <0.02%. Processing injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® MS PP 4920 GY1233-20 is a polypropylene heterophasic copolymer with 20% talcum as a filler/additive system. It is heat stabilized, scratch resistant, UV stabilized, and impact modified, making it suitable for automotive applications such as housings and fasteners. For optimal results, it should be pre-dried before processing. Injection molding should be used to process it, with a melt temperature of 200-270°C and a mold temperature of 20-70°C.

MOCOM Compounds ALCOM® ASA/PC 540/5 UV GY81-714MCF is a UV stabilized polycarbonate + Acrylonitrile Styrene Acrylate Blend with a metallic color and low tendency to flow lines. It is typically used for housings and is suitable for electrical and electronic, building and construction, and sport and leisure market segments. Pre-drying Conditions for this material are in a dry air (dessiccant) dryer 90-110°C for 2-4 hours, in an air circulating dryer 90-110°C for 4-8 hours depending on moisture content. Processing Injection molding involves using a melt temperature of 260-300°C and a mold temperature of 60-90°C. It is important to note that the material should be dried prior to molding to ensure optimal performance.

MOCOM Compounds ALTECH® ABS A 1000/227 UV is a special UV-stabilized Acrylonitrile/Butadiene/Styrene/Copolymer base polymer that is suitable for injection molding with melt temperatures between 200-240°C and mold temperatures between 50-80°C. This polymer is ideal for applications such as housings, clothing/fasteners, and building and construction. It is essential to pre-dry the polymer under conditions of 80°C in a dry air (dessiccant) dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours, depending on moisture content, with a maximum moisture content of 0.20%. Furthermore, it should be stored in a dry environment that is protected from light and not above 30°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1090-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, high light diffusion, and good flow properties. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements and is approved by GMW15702 and GM3013.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18045 WT1048-18 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and offers light scattering, translucent, easy release (demolding), and easy flow properties. It is ideal for automotive, lighting, and white panel-technology applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18041 WT1078-12 is a polycarbonate base polymer with a special filler and UV stabilized additive system. It is translucent, providing high light diffusion and good flow, making it suitable for applications in automotive and lighting markets such as lamp covers, display elements, and operating elements. During processing, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1072-13LD is a polycarbonate base polymer filled with a special filler and UV stabilized for light scattering and high light diffusion to provide easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting market and has been approved by GS93016.

MOCOM Compounds ALCOM® PC 740/4 UV RD1231-08LD is a polycarbonate containing a special filler system with light scattering and high light diffusion properties, as well as being UV stabilized and having good flow. It is suitable for use in the automotive and lighting market segments and is typically used in applications such as lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LDDC PC 1000 UV BK1044-20 is a polycarbonate-based, injection molding grade resin with a special filler/additive system, good flow, processing stabilized, UV stabilized, and light scattering properties. This resin is used in the automotive and lighting markets for applications such as lamp covers, display elements, and operating elements, and is suitable for black panel-technology and light transparent components. For injection molding processing, the recommended melt temperature is 270-310°C and the mold temperature is 80-110°C. It is recommended to use a low pressure injection molding process.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 15003 CC1005-15 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized, providing high light transmission and light scattering, as well as high light diffusion, dependent on wall thickness and easy flow. It is suitable for automotive and lighting market segments, for applications such as lamp covers, display elements, and operating elements. Processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. This product is approved by GS93016 and should be stored in its original packaging.

MOCOM Compounds ALTECH® PC A 1000/121 UV IM should be pre-dried under conditions of 120°C in a dry air (dessiccant) dryer for 2-3 hours, or in an air circulating dryer at 100-120°C for 4-12 hours depending on moisture content, with a maximum moisture content of 0.02%. For processing through injection molding, the melt temperature should be set between 270-310°C, and the mold temperature between 80-110°C. The base polymer is polycarbonate, and the filler/additive system is UV stabilized and impact modified. Typical applications are varied, and the product should be handled with care to avoid damage.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1100-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and translucent, light scattering, and has high light diffusion. It has easy flow properties and is suitable for automotive, lighting, and light transparent components. Typical applications include lamp covers, display elements, and operating elements. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALCOM® CFX ASA 1000 UV 15116 SV1163-15MC is a pre-drying conditions acrylonitrile/styrene/acrylate/copolymer with UV stabilized metallic effect, which has low tendency to flow lines and is easy to flow. It is used in electrical and electronic, building and construction, and sport and leisure applications and is an injection molding grade. The melt temperature for processing injection molding is 240-280°C and the mold temperature is 40-80°C.

MOCOM Compounds ALCOM® LIR PC 1000 UV 14099 BK1203-14 is a polycarbonate base polymer with a UV stabilized filler/additive system and special features of IR-transparency. It is suitable for applications in the automotive and lighting markets, such as lamp covers, display elements, and operating elements. For processing injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. The product should be stored in a dark place.

MOCOM Compounds ALCOM® PC 740/25 UV WT1445-06LD is a high heat polycarbonate with a special filler/additive system that provides light scattering, high light diffusion, high heat stabilization, UV stabilization, and easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting markets. Processing Injection molding should use a melt temperature of 320-340°C and a mold temperature of 100-120°C. The material should be processed immediately after pre-drying for optimal results.

MOCOM Compounds ALCOM® LD PC 1000 UV 17134 GY1129-17 is a polycarbonate base polymer with special features of being translucent, light scattering, high light diffusion, easy release (demolding), good flow, processing stabilized, and UV stabilized. It is approved by GS93016 and is typically used in the automotive and lighting market segments for lighting and light transparent components. For processing injection molding, the melt temperature range is 270-310°C and the mold temperature range is 80-110°C. The product should be stored in a dry and light-protected environment, ensuring it stays in optimal condition.

MOCOM Compounds ALCOM® LD2 PC 1000 UV 14019 WT1030-14 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, and high light diffusion characteristics. It is typically used in automotive and lighting applications such as lamp covers, display elements, and operating elements. Injection molding of this polymer requires a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® LD2 MBS 1000 UV 18013 WT1021-18 is a polystyrene copolymer that is translucent, has high light diffusion, light scattering, good flow, processing stabilized, and UV stabilized. It is an injection molding grade suitable for use in the automotive and lighting market segments and is typically used for lamp covers, display elements, and operating elements.

MOCOM Compounds ALTECH® ABS A 1000/172 UV is a acrylonitrile/butadiene/styrene/copolymer with good flow, processing stabilized and UV stabilized, suitable for information technology, electrical and electronic and telecommunications applications including display elements, keyboards, and other various applications. For processing, injection molding with a melt temperature of 200-240°C and a mold temperature of 50-80°C is recommended. Pre-drying conditions should be 80°C in an air circulating dryer for 3-6 hours or 80°C in a dry air (dessiccant) dryer for 2-4 hours, depending on moisture content, with a maximum moisture content of 0.20%.

MOCOM Compounds ALCOM® AWL 109/15 UV WT1217-11LB is a base polymer of acrylonitrile/butadiene/styrene/copolymer modified with polycarbonate, containing 15% special filler and special features of being highly reflective, opaque, UV stabilized, and highly heat stabilized. It is intended for use in the automotive and various market segments, primarily for lighting and light blocking components such as light guides and reflectors.

MOCOM Compounds ALTECH® PC A 1000/502 UV WT1123-11LS is a polycarbonate base polymer with easy flow, UV stabilization and laser etchable (dark etching) properties. It is suitable for various injection molded parts and applications. For injection molding, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C. Furthermore, it should be stored dry, protected from light, and not above 30°C.

MOCOM Compounds ALTECH® PA6 A 2003/712 GF3 IM UV is a polyamide 6 with a 3% glass fiber filler/additive system. It has been impact modified, fast solidifying, has easy demolding and is UV and processing stabilized. It is suitable for injection molding with a melt temperature of 250-270°C and a mold temperature of 40-80°C and is used in the automotive, machinery, building and construction and sport and leisure market segments. Typical applications include functional components and it should be stored dry, protected from light and not above 30°C.

MOCOM Compounds ALTECH® ECO PC 1000/542 FR UV is a polycarbonate base polymer with special features including UV stabilization, easy release (demolding), and flame retardant. It contains recycled material and is suitable for electrical and electronic applications, such as housings, plugs/connectors, and functional components.

MOCOM Compounds ALCOM® PC 740/4 UV GY1172-13LD2 is a polycarbonate base polymer with an UV stabilized filler/additive system. It is translucent and has an easy flow property, making it ideal for use in the automotive and lighting markets for lamp covers, display elements, and operating elements. It is approved by GS93016 and should be processed with a melt temperature of 270-310°C and a mold temperature of 80-110°C. For pre-drying, it should be placed in a dry air (dessiccant) dryer at 120°C for 2-4 hours, or in an air circulating dryer at 120°C for 4-12 hours, with a maximum moisture content of <0.02 %.

MOCOM Compounds ALTECH® ECO PC 1000/521 IM UV is a polycarbonate base polymer with UV stabilization, easy release (demolding) and impact modification. It is suitable for pre-drying conditions at 120°C in a dry air (dessiccant) dryer for 2-4 hours or in an air circulating dryer at 100-120°C for 4-12 hours depending on moisture content (max. moisture content <0.02%). It has multiple market segments, including electrical and electronic, lighting, and various, and is suitable for exterior fixtures/fittings and various garden equipment and housings. To ensure optimal performance, it should be kept out of direct sunlight.

MOCOM Compounds ALCOM® PC 740/4 UV SV1003-06MCO is a polycarbonate with a metallic effect that has been UV stabilized and flow line optimized. It is suitable for various applications and is best processed with a melt temperature of 270-310°C and a mold temperature of 80-110°C. It must be protected from light and stored at a temperature not exceeding 30°C. Pre-drying conditions must be in an air circulating dryer at 100-120°C for 2-12 hours depending on the moisture content, with a maximum moisture content of less than 0.02%.

MOCOM Compounds ALCOM® PC 740/4 UV OR1075-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering, high light diffusion, and translucency similar to RAL 2003. It is UV stabilized and approved by GS93016, suitable for automotive and lighting segment applications such as lamp covers, display elements, and operating elements. For injection molding, the suggested melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALTECH® ECO PC 1000/141 FR is a polycarbonate base polymer with special features such as UV stabilization, easy release (demolding), and flame retardant impact modification. It is suitable for pre-drying conditions in an air circulating dryer at 100-120°C for 4-12 hours, or 120°C in a dry air (dessiccant) dryer for 2-3 hours, dependent on the moisture content with a maximum moisture content of 0.02%. It can be used for applications in the electrical and electronic, lighting, and various markets such as housings, security engineering parts, sockets, plugs/connectors, and various others.

MOCOM Compounds ALCOM® MS PP 4920 BK1248-20 is a Polypropylene Heterophasic Copolymer containing 20% talcum, which is heat stabilized, scratch resistant, UV stabilized, and impact modified. It is suitable for use in Automotive applications such as housings and clothing/fasteners. Pre-drying should be done in an air circulating dryer at 60-90°C for 2-4 hours, or in a dry air (dessiccant) dryer at 60-90°C for 2-4 hours depending on moisture content. For injection molding, the melt temperature should be set at 200-270°C and mold temperature at 20-70°C.

MOCOM Compounds ALCOM® PC 740/4.2 UV GY1076-10LD is a polycarbonate base polymer with a special filler/additive system designed to provide light scattering, high light transmission, and easy flow. It is UV stabilized and is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. For best results, the pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h, or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. The processing injection molding melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 UV CC1321-08LG is a polycarbonate base polymer containing a special filler/additive system that is UV stabilized and has high light transmission, light scattering, and good flow. It is used in the automotive and lighting market segments for applications such as lighting, light transparent components, light guides, display elements, and operating elements, and is approved by BQF5404 and GS93016.

MOCOM Compounds ALCOM® AWL 15/1 UV WT1471-04LB is a base polymer of Acrylonitrile/Butadiene/Styrene/Copolymer with a filler/additive system of 15% special filler. It is highly reflective, opaque, and UV stabilized, used in the automotive and lighting markets for applications such as light guides and reflectors. Processing injection molding requires a melt temperature of 220-260°C and a mold temperature of 50-80°C. This product should be stored in a dry, light-protected environment.