Products

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1090-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and has translucent, light scattering, high light diffusion, and good flow properties. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements and is approved by GMW15702 and GM3013.

MOCOM Compounds ALCOM® HTC 300/1 WT1056-10LD is a high temperature copolyester base polymer which is pre-dried with 90°C in a dry air (dessiccant) dryer for 4-6 hours to a maximum moisture content of <0,03%. It is equipped with a special filler/additive system for light scattering and high light diffusion, and is intended to be utilized in the automotive and lighting market segments for lighting and light transparent components, such as lamp covers, display elements, and operating elements. The process of injection molding requires a melt temperature of 260-280°C and a mold temperature of 50-70°C. Additionally, the product should be stored in a dry and light-protected area.

MOCOM Compounds ALCOM® ABS 530/29 UV SV1269-05MCS is a UV-stabilized acrylonitrile/butadiene/styrene/copolymer with good flow and a metallic color. It is used in building and construction and sport and leisure markets for domestic appliance housings. For injection molding, it should be melted at a temperature of 220-260°C and molded at a temperature of 50-80°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1072-13LD is a polycarbonate base polymer filled with a special filler and UV stabilized for light scattering and high light diffusion to provide easy flow. It is typically used for lamp covers, display elements, and operating elements in the automotive and lighting market and has been approved by GS93016.

MOCOM Compounds ALTECH® PP-H A 4920/508 MR20 is a Polypropylene Homopolymer with a filler/additive system of talcum that has special features of being detectable, processing stabilized, easy release (demolding), and heat stabilized. It is mainly used in the building and construction and automotive market segments for applications such as injection molded parts, interior decoration/finishing, and functional components and housings. For optimal performance, this material should be stored in dark places and not exposed to temperatures above 30°C.

MOCOM Compounds TEDUR® L 9214-1 is a base polymer of polyphenylene sulfide with a filler/additive system of 45% glass fibers and 20% mineral. It is designed for highly stressed parts in the automotive and machinery market segments, and has special features of high stiffness. Pre-drying conditions include a dry air (dessiccant) dryer at 130-140°C for 2-4 hours depending on moisture content. Processing includes injection molding with a melt temperature of 320-340°C and a mold temperature greater than 140°C.

MOCOM Compounds ALCOM® PC 740/4 UV WT1257-04LD is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and features light scattering and high light transmission. It is used in automotive and lighting applications such as lamp covers, display elements, and operating elements, and is approved by GS93016. For optimal performance, injection molding should be done at a melt temperature of 270-310°C and mold temperature of 80-110°C. It is important to follow these instructions.

MOCOM Compounds ALCOM® LD2 MBS 1000 UV 18013 WT1021-18 is a polystyrene copolymer that is translucent, has high light diffusion, light scattering, good flow, processing stabilized, and UV stabilized. It is an injection molding grade suitable for use in the automotive and lighting market segments and is typically used for lamp covers, display elements, and operating elements.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 18041 WT1078-12 is a polycarbonate base polymer with a special filler and UV stabilized additive system. It is translucent, providing high light diffusion and good flow, making it suitable for applications in automotive and lighting markets such as lamp covers, display elements, and operating elements. During processing, the melt temperature should be between 270-310°C and the mold temperature should be between 80-110°C.

MOCOM Compounds ALTECH® PS-HI A 1000/100 is a Polystyrene-based injection molding grade with high impact properties and is suitable for applications such as light switches, functional components and various fixtures/fittings in market segments such as lighting, packaging, and various. Pre-drying conditions vary depending on moisture content, but can include a dry air (dessiccant) dryer at 60-80°C for 2-3 hours, or an air circulating dryer at 60-80°C for 2-3 hours. Processing injection molding requires a melt temperature of 180-260°C and a mold temperature of 10-70°C. For optimal results, it should be stored in a dry place, protected from light, and not above 30°C.

MOCOM Compounds Alcom® LB PC 1000 14073 WT1164-14 is a polycarbonate-based injection molding grade polymer with a special filler/additive system that provides improved surface appearance and easy flow. This material is highly reflective and designed specifically for use in the automotive and lighting markets.

MOCOM Compounds ALCOM® PC 740/4.2 UV WT1100-08LD2 is a polycarbonate base polymer with a special filler/additive system that is UV stabilized and translucent, light scattering, and has high light diffusion. It has easy flow properties and is suitable for automotive, lighting, and light transparent components. Typical applications include lamp covers, display elements, and operating elements. For processing injection molding, a melt temperature of 270-310°C and a mold temperature of 80-110°C should be used.

MOCOM Compounds ALTECH® PP-H A 4818/100 MR18 is a Polypropylene Homopolymer with a Filler/Additive System of chalk, which features detergent solution stabilization, processing stabilization, and easy release (demolding). Processing Injection molding should be done with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This product is suitable for building and construction applications and is often used in domestic appliances, housings, and functional components.

MOCOM Compounds Altech® ECO PA66 1000/561 is a polyamide 66 base polymer with impact modification and the inclusion of recycled material, making it suitable for applications in the automotive, building and construction, and various other market segments. Typical applications include housing and automotive trim unpainted, fixing elements, cable ties, and various others. For usage, it should be kept dry, protected from light, and the temperature should not exceed 30°C. For processing injection molding, a melt temperature of 270-290°C is required, and a mold temperature of 40-80°C.

MOCOM Compounds ALCOM® LD2 PC 1000 14050 GY1118-14 is a special filler-based polycarbonate with pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-4 h, 120°C in an air circulating dryer for 4-12 h, and a maximum moisture content of <0.02%. It features translucent, light scattering, and high light diffusion properties, making it suitable for Automotive and Lighting market segments, with typical applications including lamp covers, display elements, and operating elements. It is approved by GS93016 and is suitable for injection molding with a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALCOM® PP 620/6 UV GY1380-05MCO is a gray, metallic, flow line optimized, and UV stabilized polypropylene homopolymer. It is suitable for pre-drying conditions in an air circulating dryer at 80-100°C for 2-4 hours, or in a dry air (dessiccant) dryer at 80-100°C for 2-3 hours, depending on moisture content. For injection molding, a melt temperature of 200-270°C and a mold temperature of 20-70°C are recommended. Typical applications include housings for household goods. To ensure the best performance, it should be kept dry and protected from light, not exceeding 30°C.

MOCOM Compounds ALTECH® PA6 B 2015/100 GF15 is a polyamide 6-based product with 15% glass fibers, heat and processing stabilized, and easy release (demolding). It is suitable for building and construction, machinery, clothing/fasteners, and injection-molded parts applications. Pre-drying conditions must be 80°C in a dry air (dessiccant) dryer for 2-12 h depending on moisture content with a maximum moisture content of 0.15%. Processing temperature for injection molding should be between 270-290°C, mold temperature should be between 80-100°C, and it should be protected from light and stored at temperatures below 30°C.

MOCOM Compounds ALFATER® XL A60I 4FC0010 is a thermoplastic vulcanisate (PP+EPDM) of natural color, bright inherent color, and blue. Its pre-drying conditions include a dry air (dessiccant) dryer at 70-80°C for 2-4 hours, with a maximum moisture content of less than 0.10%. Special features of the polymer include being food contact compliant with EN 71-3, good colorability, good weathering resistance, good chemical resistance, good ozone resistance, good hot air resistance, and good hydrolysis resistance. It is used in the packaging, household goods, food processing industry, toys, and other areas for injection molded parts, such as seals, sealing lips, handles, soft touch elements, protection caps, caps/closures, containers, and kitchenware. It adheres to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-B B 2020/550 GF20 Pre-Drying Conditions is suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. The base polymer is a polypropylene copolymer with a filler/additive system of 20% glass fibers that is chemically coupled, processing stabilized, and has easy release (demolding) and heat stabilizing features. The market segment for this material is building and construction, packaging, and its application areas are household goods, power tools, exterior parts, and filter systems. Typical applications include racking/shelving, handles, housings, and functional components. For storage, this material should be kept dry, protected from light, and not above 30°C.

MOCOM Compounds ALCOM® PC 740/4 WT1140-03LD is a polycarbonate base polymer with a special filler/additive system for light scattering, high light diffusion, high light transmission, and easy flow. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, operating elements, and light transparent components. Processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C. It has been approved by GS93016 and should be stored in a dry place, away from direct sunlight, in order to preserve its quality.

MOCOM Compounds ALCOM® PC 740/4 RD1123-05LD is a polycarbonate base polymer with a special filler/additive system that provides light scattering and translucency, making it suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. It has approval GS93016. To optimize performance, pre-drying conditions should include 120°C in a dry air (dessiccant) dryer for 2-4 hours and 120°C in an air circulating dryer for 4-12 hours with a maximum moisture content of less than 0.02%.

MOCOM Compounds ALCOM® PC 740/4 BL1435-07LD is a polycarbonate base polymer with a special filler/additive system which provides translucent, light scattering, and high light diffusion properties with good flow. This polymer is suitable for automotive lighting applications such as lamp covers, display elements, and operating elements, and has been approved by GS93016. Pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, and 120°C in an air circulating dryer for 4-12 hours, with a maximum moisture content of 0.02%. Injection molding should be done at a melt temperature of 270-310°C and a mold temperature of 80-110°C.

MOCOM Compounds ALFATER® XL A90I 4GP0000 is a thermoplastic vulcanisate (PP+EPDM) suitable for injection molding applications. It comes in natural color, bright inherent color, and black and has low emission, good colorability, easy flow, good weathering resistance, good chemical resistance, good ozone resistance, and good hot air and hydrolysis resistance. It can be used for injection molded parts such as seals, sealing lips, handles, racking/shelving, soft touch elements, impact protection/shock absorbers, protection caps, thin walled parts, profiles, cable ducts, and casters and has good adhesion to polypropylene homopolymer, polypropylene copolymer, polyethylene, thermoplastic vulcanisate (PP+EPDM), thermoplastic olefin elastomer, and thermoplastic elastomer general.

MOCOM Compounds ALTECH® PP-H A 4920/107 MR20 is a polypropylene homopolymer that is processing stabilized, easy to release (demolding), heat stabilized, and is typically used for functional components, housings, injection molded parts, interior decoration/finishing, clothing/fasteners in the automotive, electrical, and electronic market segments.

MOCOM Compounds ALCOM® HM PA+ABS 1000 AG 16077 is a hygienic material with antibacterial features according to ISO 22196. It is white in color, similar to RAL 9003, and is mainly used for injection molded parts such as sanitary articles, hygiene products, functional components, fittings, housings, clothing/fasteners. It is also suitable for applications such as packaging, personal care, furniture, building and construction, and sport and leisure.

MOCOM Compounds ALCOM® LDDC PC 1000 UV 17187 BK1192-17 is a polycarbonate base polymer with a special filler/additive system, UV stabilized, that is translucent, light scattering and high light diffusion. It is used in automotive and lighting applications, primarily for light transparent components, Black Panel-Technology and typical applications such as display elements and operating elements.

MOCOM Compounds ALTECH® PP-H A 2030/158 GF30 CP is a Polypropylene Homopolymer filled with 30% glass fibers which is chemically coupled, heat stabilized, processing stabilized, and easy release (demolding). It is suitable for building and construction, as well as automotive applications, and is typically used for housings, functional components, and injection molded parts. Pre-drying conditions include a dry air (dessiccant) dryer of 80-120°C for 2-3 hours, or an air circulating dryer of 80-120°C for 2-4 hours. For processing injection molding, a melt temperature of 200-250°C and a mold temperature of 20-70°C is required.

MOCOM Compounds ALCOM® MS PP 4920 BK1248-20 is a Polypropylene Heterophasic Copolymer containing 20% talcum, which is heat stabilized, scratch resistant, UV stabilized, and impact modified. It is suitable for use in Automotive applications such as housings and clothing/fasteners. Pre-drying should be done in an air circulating dryer at 60-90°C for 2-4 hours, or in a dry air (dessiccant) dryer at 60-90°C for 2-4 hours depending on moisture content. For injection molding, the melt temperature should be set at 200-270°C and mold temperature at 20-70°C.

MOCOM Compounds ALPERFORM® ABS AS A 0031-05 is a dosage of 5% extrusion and 5% injection molding dependent on application and operational area. The base polymer is Acrylonitrile/Butadiene/Styrene/Copolymer and the filler/additive system is antistatic - short term. It is suitable for use in Acrylonitrile/Butadiene/Styrene/Copolymer and is ideal for market segments such as automotive, electrical and electronic, building and construction, sport and leisure, and domestic appliances. It can be applied for both injection molded and extruded parts.

MOCOM Compounds ALCOM® CFX ABS 1000 18037 SV1035-18MC is a pre-dried acrylonitrile/butadiene/styrene/copolymer with a metallic effect that is used for injection molded parts such as housings and bezels. It is suitable for electrical and electronic, building and construction, and sport and leisure applications. Pre-drying conditions are 80°C in a dry air dessiccant dryer for 2-4 hours and 80°C in an air circulating dryer for 3-6 hours depending on moisture content. For processing injection molding, the melt temperature should be between 220-260°C and the mold temperature should be between 50-80°C. It is important to protect the material from light and store it in a dark, dry place.

MOCOM Compounds ALTECH® PP-H A 2030/157 GF30 CP is a polypropylene homopolymer suitable for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This polypropylene contains 30% glass fibers that have been chemically coupled and heat stabilized, as well as added easy release (demolding) and slip agents. It is suitable for electrical and electronic, building and construction applications and is used in injection molded parts, electrical components, and domestic appliances such as housings, fans, and functional components.

MOCOM Compounds ALCOM® PC 740/4.2 UV GY1076-10LD is a polycarbonate base polymer with a special filler/additive system designed to provide light scattering, high light transmission, and easy flow. It is UV stabilized and is suitable for automotive and lighting applications such as lamp covers, display elements, and operating elements. For best results, the pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 h, or 120°C in an air circulating dryer for 4-12 h with a maximum moisture content of <0.02%. The processing injection molding melt temperature should be 270-310°C and the mold temperature should be 80-110°C.

MOCOM Compounds ALCOM® PC 740/4 GY1247-10LD is a polycarbonate base polymer with a special filler/additive system that provides translucent, light scattering, and easy flow properties. It is suitable for use in automotive and lighting applications, such as lamp covers, display elements, and operating elements. Processing injection molding requires a melt temperature of 270-310°C and a mold temperature of 80-110°C, and the product should be stored dry and protected from light. Additionally, it is approved by GS93016.

MOCOM Compounds ALTECH® ABS A 1000/106 YL1248-05LS is an Acrylonitrile/Butadiene/Styrene/Copolymer pre-dried with 80°C in an air circulating dryer for 3-6 h or 80°C in a dry air (dessiccant) dryer for 2-4 h depending on the moisture content, with a maximum moisture content of <0.20%. It is an easy flow, injection molding grade laser etchable (dark etching) polymer suitable for various electrical and electronic applications such as domestic appliances and various injection molded parts. For optimal processing conditions, it should be processed with a melt temperature of 200-240°C and a mold temperature of 50-80°C. Cooling time should also be considered for proper molding of the parts.

MOCOM Compounds ALCOM® LD PC 1000 UV 15072 GY1121-15 is a polycarbonate-based polymer with a special filler/additive system that is UV stabilized and translucent, providing high light diffusion and light scattering. It is used in the automotive and lighting market segments for applications such as lamp covers, display elements, and operating elements. It has been approved by GS93016. For processing injection molding, its melt temperature should be between 270-310°C and its mold temperature should be between 80-110°C. All processing conditions should be closely monitored to ensure optimal results.

MOCOM Compounds ALCOM® PC 740/4 UV RD1207-08LD is a light scattering and UV stabilized polycarbonate with a special filler and a maximum moisture content of <0.02%. It is designed for automotive and lighting applications such as lamp covers, display elements, and operating elements and is approved by GS93016. Injection molding should take place at a melt temperature of 270-310°C and a mold temperature of 80-110°C. Pre-drying conditions should be applied at 120°C in a dry air (dessiccant) dryer for 2-4 h or in an air circulating dryer for 4-12 h to ensure optimal performance.