Enhanced TDS
Knowde-enriched technical product data sheet
Identification & Functionality
- Fillers Included
- Polymer Name
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Markets
- Applications
- Compatible Polymers & Resins
- Plastics & Elastomers End Uses
- Plastics & Elastomers Processing Methods
Properties
- Color
- Mechanical Properties
Value Units Test Method / Conditions Tensile Strength (Type 2) 8.5 MPa ISO 37 Tear Strength (Method Ba) 43.0 kN/m ISO 34-1 Elongation at Break (Type 2) 500.0 % ISO 37 Shore Hardness A (15s) 90.0 - ISO 868 Tensile Stress at 100% Elongation (Type 2) 5.0 MPa ISO 37 - Physical Properties
Value Units Test Method / Conditions Density 940.0 kg/m³ ISO 1183 - Thermal Properties
Value Units Test Method / Conditions Compression Set (22h, at 70°C, 25%, Type A) 50.0 % ISO 815 Compression Set (22h, at 100°C, 25%, Type A) 60.0 % ISO 815 Compression Set (72h, at 22°C, 25%, Type A) 34.0 % ISO 815 Compression Set (72h, at 125°C, 25%, Type A) 80.0 % ISO 815 - Typical Properties
Value Units Test Method / Conditions Service Temperature (depending on load, geometry, etc.) - 40 to 125 °C - Moisture Content max. 0.1 % - - Processing Information (Injection Molding)
Value Units Test Method / Conditions Back Pressure (hydraulic) min. 3 bar - Mould Temperature 10 - 70 °C - Melt Temperature 195 - 230 °C - Holding Pressure (of injection pressure) 50 - 70 % - Injection Speed Middle - High - - - Rheological Properties
Value Units Test Method / Conditions Shrinkage (Lengthwise, 24h) 1.4 - 1.8 % ISO 294-4 Shrinkage (Lateral, 24h) 1.1 - 1.4 % ISO 294-4 Spiral Flow (2 mm wall thickness) 67.0 cm -
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
In a dry air (dessiccant) dryer 70-80 °C for 2-4 h
- Technical Data
Storage & Handling
- Storage Conditions
Store in dry, protected from light tightly sealed.