Products

MOCOM Compounds ALCOM® POM 770/1.1 CF20 is a Polyoxymethylene Copolymer with 20% carbon fibers that offers electrically conductivity, reduced surface resistivity and high stiffness. It is commonly used for functional components and bearings in automotive, machinery, and other industries. For pre-drying, the material should be placed in a dry air (dessiccant) dryer at 100-110°C for 2-3 hours, or in an air circulating dryer at 100-110°C for 3-5 hours, with a maximum moisture content of less than 0.02%. The melt temperature for injection molding is 190-230°C and the mold temperature is 60-120°C.

MOCOM Compounds TEDUR® L 9200-1 U is a polyphenylene sulfide base polymer with a filler/additive system of 60% glass fiber/mineral. It is designed for pre-drying conditions in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature of more than 140°C. It offers high toughness, high stiffness, low warpage, and low anisotropic shrinkage, making it suitable for use in the automotive and various market segments. It is typically used for applications such as seals.

MOCOM Compounds ALTECH® NXT PP -H A 2035/752.02 GF35 CP UV is a polypropylene homopolymer with a 35% glass fiber filler/additive system that is chemically coupled, high heat stabilized, high stiffness, high toughness, UV stabilized, and heat stabilized. It is suitable for pre-drying conditions in an air circulating dryer at 80-120°C for 2-4 hours and in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours. For processing injection molding, the melt temperature should be 200-250°C and the mold temperature should be 20-70°C. This product is suitable for use in the automotive market segment for various injection molded parts.

MOCOM Compounds ALCOM® PC 740/1.1 CF20 is a polycarbonate base polymer filled with 20% carbon fibers that is electrically conductive, has reduced surface resistivity, high stiffness, and is heat stabilized. It is suitable for use in machinery and various other market segments, and is typically used in the injection molding of housings, functional components, and protection caps. To ensure optimal performance, pre-drying conditions should be 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of <0.02%. The melt temperature for injection molding should be between 290-330°C and the mold temperature should be between 80-130°C.

MOCOM Compounds TEDUR® L 9113-2 is a Polyphenylene Sulfide injection molding grade with a filler/additive system of 60% glass fibers. It has a high stiffness and is suitable for use in the Automotive and Machinery markets. Pre-drying conditions should be in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. Processing Injection molding should be done with a melt temperature of 320-340°C and a mold temperature greater than 140°C. It is recommended to protect from light and store at a temperature not exceeding 30°C.

MOCOM Compounds ALCOM® PC 740/3162.1 CF10 GF10 TF10 is a polycarbonate base polymer with 10% glass fibers, 20% carbon fiber/PTFE filler/additive system. It is electrically conductive, has improved sliding/wear and high stiffness, and is used in the automotive and machinery market segments for applications such as housings and functional components. Pre-drying conditions of 120°C in a dry air (dessiccant) dryer for 2-3 hours, or in an air circulating dryer of 100-120°C for 4-12 hours, depending on moisture content, are required for processing. For injection molding, melt temperature should be set between 310-330°C and mold temperature should be set between 80-130°C.

MOCOM Compounds ALTECH® NXT PP -H A 2330/450.02 GF20 GB10 CP is a polypropylene homopolymer with a filler/additive system consisting of 20% glass fibers and 10% glass beads that are chemically coupled and heat stabilized for high stiffness. It is suitable for the automotive market segment and various injection molded parts. For optimal use, it should be kept dry and protected from light, not exceeding 30°C.

MOCOM Compounds TEDUR® L 9400-3.2 is a Polyphenylene Sulfide based polymer with 15% carbon fibers, designed for reduced surface resistivity and electrically conductive, high stiffness applications in the Automotive, Machinery, electrical and electronic market segments. It is suitable for functional components and should be protected from light. Pre-drying conditions involve drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 h, depending on moisture content. Processing with injection molding should be done at a melt temperature of 320-340°C and a mold temperature of >140°C. Cooling should be done quickly to avoid warpage.

MOCOM Compounds ALTECH® NXT PP -H A 2035/450.02 GF35 CP is a polypropylene homopolymer containing 35% glass fibers which is chemically coupled, heat stabilized for high temperature applications, and provides high stiffness and toughness. It is suitable for pre-drying in an air circulating dryer at 80-120°C for 2-4 hours or in a dry air (desiccant) dryer at 80-120°C for 2-3 hours, and for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is typically used in the automotive market segment for a variety of injection molded parts.

MOCOM Compounds ALCOM® PC 740/1.1 CF30 is a polycarbonate base polymer with 30% carbon fibers that has special features of being electrically conductive and having reduced surface resistivity and high stiffness. It is typically used for injection molding parts such as housings and functional components. Its pre-drying conditions are 120°C in a dry air (dessiccant) dryer for 2-4 hours, with a maximum moisture content of 0.02%. The melt temperature for injection molding is between 290-330°C, and the mold temperature is between 80-130°C. The product should be stored in a dry and light-protected environment. It is used in the Machinery market segment and should be handled with care to ensure the highest quality.

MOCOM Compounds ALTECH® PP-H A 4920/109 TV20 is a polypropylene homopolymer with 20% talcum, which is heat stabilized, highly stiff, UL-listed, and processing stabilized for easy demolding. It is used in the electrical and electronic, automotive markets for applications such as electrical components, interior decoration/finishing, exterior parts, housings, functional components, automotive powertrain parts, radiator grilles, and fans.

MOCOM Compounds TEDUR® L 9510-1 S is a base polymer of Polyphenylene Sulfide filled with 40% glass fibers, designed for injection molding with pre-drying conditions in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content, and melt temperature of 320-340°C and mold temperature of greater than 140°C. It is used for machinery pump components in various applications and should be stored in a cool, dark place, not above 30°C.

MOCOM Compounds ALTECH® PP-H FC 2030/100 GF30 is a Polypropylene Homopolymer with a 30% glass fibers filler/additive system that provides high stiffness and is both processing and heat stabilized. It has a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material is used in market segments such as packaging, personal care, machinery, electrical and electronic products, and is suitable for injection molded parts, electrical components, domestic appliances, and food contact items. Typical applications include kitchenware, functional components, and housings.

MOCOM Compounds ALTECH® PP-H FC 4940/100 TV40 is a Polypropylene Homopolymer with a filler/additive system of 40% talcum which offers high stiffness, high heat stabilization, processing stabilization, and easy release (demolding). It is suitable for applications in the electrical and electronic, building and construction, and personal care market segments, such as kitchenware, functional components, housings, and other household goods. To ensure its optimal performance, pre-drying conditions should be completed, and the processing injection molding should be carried out at specific melt and mold temperatures.

MOCOM Compounds ALTECH® ABS A 2020/906 is a pre-drying acrylonitrile/butadiene/styrene/copolymer with 20% glass fibers. It is suitable for injection molding, with a melt temperature of 220-260°C and mold temperature of 50-80°C, offering high stiffness for various injection molded parts such as housings. To ensure optimal product performance, it should be stored in a dry, light-protected environment not exceeding 30°C.

MOCOM Compounds ALCOM® PBT 700/2 WT31-956LB is a Polybutylene Terephthalate base polymer with a special filler/additive system that provides high stiffness and a highly reflective, opaque finish. It is used in the automotive and various other market segments for applications such as lighting, light blocking components, light guides, and reflectors. It can be processed for injection molding with a melt temperature of 250-270°C and a mold temperature of 80-120°C. For optimal performance, it should be stored in a dry and light-protected environment.

MOCOM Compounds ALTECH® NXT PP -H A 2030/450.02 GF30 CP is a polypropylene homopolymer filled with 30% glass fibers, chemically coupled and high heat stabilized, providing high stiffness and high toughness. It is suitable for various injection molded parts in the automotive market segment. Processing injection molding requires a melt temperature of 200-250°C and a mold temperature of 20-70°C.

MOCOM Compounds TEDUR® L 9421-1 S is a blend of Polyphenylene Sulfide and 40% glass fibers, 10% PTFE, which has improved sliding/wear, high stiffness, and high toughness properties. It is used in Automotive and Machinery markets for bearings and sliding elements, functional components. The pre-drying conditions involve drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content. The processing injection molding involves a melt temperature of 320-340°C and a mold temperature greater than 140°C.

MOCOM Compounds ALTECH® PP-H A 2440/550 GF25 MR15 CP is a polypropylene homopolymer with 25% glass fibers and 15% talcum pre-dried in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours or an air circulating dryer at 80-120°C for 2-4 hours, with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is high heat stabilized, chemically coupled, and has high stiffness and easy release (demolding). It is suitable for automotive, electrical, and electronic applications such as exterior parts, interior decoration/finishing, electrical components, and injection molded parts.

MOCOM Compounds TEDUR® L 9217-1 S is a polyphenylene sulfide base polymer filled with 65% glass fiber/mineral and is used in the automotive, machinery, and lighting market segments. It has special features such as high stiffness, hot oil resistance, and good hydrolysis resistance, and is typically used for highly stressed parts. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on the moisture content. Processing injection molding should be done at a melt temperature of 320-340°C and a mold temperature of greater than 140°C.

MOCOM Compounds ALCOM® PC 740/1.1 CF10 GF20 is a base polymer of polycarbonate with 10% carbon fibers and 20% glass fibers. It is electrically conductive, has reduced surface resistivity and provides high stiffness, making it suitable for use in the automotive and machinery markets. It is applicable to various applications such as housings and functional components. When processing injection molding, the melt temperature should be between 290-330°C and the mold temperature should be between 80-130°C. Additionally, the product should be stored in a dry environment, protected from light.

MOCOM Compounds CELLIDOR® CP 2825-11 is a base polymer of cellulose acetate propionate with a phthalate-free filler/additive system of plasticiser and light stabilizer. It has special features of easy flow, high toughness, high stiffness, and UV stabilization, making it suitable for various market segments and applications areas, such as sports equipment and spectacle lenses. For injection molding, the melt temperature should be set between 190-235°C and the mold temperature should be between 40-80°C.

MOCOM Compounds ALCOM® PC 740/1.1 CF10 is a polycarbonate base polymer with 10% carbon fibers filler/additive system pre-dried under conditions of 120°C in a dry air (dessiccant) dryer for 2-4 hours with a maximum moisture content of less than 0.02%. It has special features, such as being electrically conductive, having reduced surface resistivity, high stiffness, and being heat stabilized. It is used in the machinery market segment for injection molded parts, such as housings and functional components, and the processing injection molding requires a melt temperature of 290-330°C and a mold temperature of 80-130°C.

MOCOM Compounds TEDUR® L 9523 is a polyphenylene sulfide base polymer with a 60% glass fiber/mineral filler/additive system, which is black in color. It has high stiffness, improved surface appearance, and is suitable for various applications such as reflectors. Pre-drying conditions should be done in a dry air (dessiccant) dryer at 130-140°C for two to four hours depending on moisture content. For processing injection molding, the melt temperature should be 320-340°C and the mold temperature should be greater than 140°C.

MOCOM Compounds ALTECH® NXT PP -H A 2050/456.02 GF50 CP is a polypropylene homopolymer with 50% glass fibers, chemically coupled and heat stabilized, providing high stiffness, high toughness, low emission, and heat stability. It is suitable for pre-drying conditions in an air circulating dryer at 80-120°C for 2-4 hours, and in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours. It is suitable for injection molding at a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is commonly used in the automotive market for various injection molded parts and should be stored in a cool, dry place and protected from light.

MOCOM Compounds ALTECH® NXT PP -H A 2330/456.02 GF20 GB10 CP is a polypropylene homopolymer with 20% glass fibers and 10% glass beads that is chemically coupled, high heat stabilized, high stiffness, low emission, and heat stabilized. It is suitable for pre-drying conditions in an air circulating dryer at 80-120°C for 2-4 hours and in a dry air (dessiccant) dryer at 80-120°C for 2-3 hours. It can be processed using injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. This material is suitable for automotive applications such as clothing/fasteners and functional components.

MOCOM Compounds TEDUR® L 9511 is a high-stiffness injection molding grade thermoplastic with a base polymer of Polyphenylene Sulfide and a filler/additive system of 45% glass fibers. Its exceptional stiffness makes it suitable for various applications, such as housings and fixing elements.

MOCOM Compounds TEDUR® L 9401-1 is a Polyphenylene Sulfide base polymer containing 40% glass fibers and 5% PTFE. It has improved sliding/wear and high stiffness properties, making it suitable for the Automotive, Machinery, and other market segments. Typical applications include bearings and sliding elements, as well as functional components.

MOCOM Compounds TEDUR® L 9406-1 is a Polyphenylene Sulfide base polymer containing 10% carbon fibers and 50% glass fiber/mineral filler/additive system. It has the special features of being electrically conductive, high stiffness, and low warpage, and is typically used in the automotive and machinery market segments for injection molded parts such as bearings and sliding elements and functional components. Pre-drying conditions involve drying in a dry air (dessiccant) dryer at 130-140°C for 2-4 h, depending on moisture content. Processing injection molding requires a melt temperature of 320-340°C and a mold temperature greater than 140°C. Finally, it should be kept away from direct sunlight.

MOCOM Compounds ALCOM® LB PA6 2015 14041 GF15 WT1100-14 is a polyamide 6 base polymer filled with 15% glass fibers and a special filler, providing high stiffness and highly reflective, opaque properties. It is used in the Automotive and Lighting Market segments, with typical applications being reflectors and light blocking components. For processing via injection molding, the melt temperature should be 270-290°C and the mold temperature should be 80-100°C.

MOCOM Compounds TEDUR® L 9220-1 is a base polymer of Polyphenylene Sulfide filled/additive system with 65% glass fiber/mineral that offers features such as high stiffness, good hydrolysis resistance, and oil resistance. For processing injection molding, it should be melted at a temperature of 320-340°C and the mold temperature should be greater than 140°C. It is used in the Automotive and Machinery market segment, and its typical applications include injection molded parts for highly stressed parts.

MOCOM Compounds TEDUR® L FC 9510-6 is a polyphenylene sulfide base polymer filled with 40% glass fibers, designed for the machinery market segment. It is used for applications such as pipe fitting, pump components, and ducting/piping systems. It has high stiffness and is recommended to be pre-dried with a dry air (dessiccant) dryer at 130-140°C for 2-4 hours, depending on moisture content, before injection molding. For injection molding, the melt temperature should be 320-340°C, and the mold temperature should be greater than 140°C.

MOCOM Compounds ALTECH® PP-H A 2030/758 GF30 CP is a polypropylene homopolymer containing 30% glass fibers and chemically coupled, high heat stabilized, high stiffness, high toughness and laser transparent special features. It is suitable for a variety of applications, such as housings. For optimal performance, store it in a dry, light-protected environment.

MOCOM Compounds TEDUR® L 9510-5 is a pre-drying injection molding grade polymer with a base polymer of polyphenylene sulfide. It contains 40% glass fibers, offering high stiffness and easy flow, and is used in various market segments with typical applications such as pump components and housings. The pre-drying conditions involve a dry air (dessiccant) dryer at a temperature of 130-140°C for 2-4 hours depending on the moisture content. The injection molding process requires a melt temperature of 320-340°C and a mold temperature of more than 140°C. Finally, the product should be stored in a cool, dry place and protected from light, at temperatures not exceeding 30°C.

MOCOM Compounds ALTECH® PP-H A 2040/159 GF40 CP is a polypropylene homopolymer suitable for injection molding with a melt temperature of 200-270°C and mold temperature of 20-90°C, containing 40 % glass fibers with special features such as chemical coupling, high toughness, and high stiffness. Typical applications are varied and it should be stored in a dry, dark place at a temperature no higher than 30°C. Ensure that it is well sealed to avoid contamination.

MOCOM Compounds TEDUR® L 9510-1 is a polyphenylene sulfide-based polymer with a 40% glass fiber filler/additive system. It has high stiffness, making it suitable for pump components and various other applications. During processing injection molding, the melt temperature should be between 320-340°C and the mold temperature should be higher than 140°C.