company tower banner

ALTECH® NXT PP -H A 2035/450.02 GF35 CP

MOCOM Compounds ALTECH® NXT PP -H A 2035/450.02 GF35 CP is a polypropylene homopolymer containing 35% glass fibers which is chemically coupled, heat stabilized for high temperature applications, and provides high stiffness and toughness. It is suitable for pre-drying in an air circulating dryer at 80-120°C for 2-4 hours or in a dry air (desiccant) dryer at 80-120°C for 2-3 hours, and for injection molding with a melt temperature of 200-250°C and a mold temperature of 20-70°C. It is typically used in the automotive market segment for a variety of injection molded parts.

Brand: ALTECH® NXT PP (7 products)

Polymer Name: Polypropylene Homopolymer (HPP)

Processing Methods: Injection Molding

Functions: Resin

Chemical Family: Polyolefins, Polypropylenes (PP)

Additives Included: Heat Stabilizer

Fillers Included: Glass Fiber

Features: Chemically Coupled, Excellent Toughness, Heat Aging Resistant, Heat Stabilized, High Stiffness, Radar Transparent

End Uses: Automotive Applications, Radomes

Technical Data Sheet

Enhanced TDS

Knowde-enriched technical product data sheet

Identification & Functionality

Additives Included: Heat Stabilizer
Chemical Family: Polyolefins,
Polypropylenes (PP)
Fillers Included: Glass Fiber
Polymer Name: Polypropylene Homopolymer (HPP)
Plastics & Elastomers Functions: Resin
Technologies: Plastics
Product Families: Plastics — Basic Thermoplastics
Polyolefins

Features & Benefits

Labeling Claims: Azo Colorants-free,
Azo Dyes-free,
Conflict Minerals-free,
Perfluorooctane Sulfonate (PFOS)-free,
Perfluorooctanoic Acid (PFOA)-free,
Persistent Organic Pollutants (POP)-free,
Polycyclic Aromatic Hydrocarbons (PAH)-free
Materials Features: Chemically Coupled,
Excellent Toughness,
Heat Aging Resistant,
Heat Stabilized,
High Stiffness,
Radar Transparent

Applications & Uses

Markets: Electrical & Electronics
Applications: Electrical & Electronics — Parts & Components
Sensors & Actuators
Plastics & Elastomers End Uses: Automotive Applications,
Radomes
Plastics & Elastomers Processing Methods: Injection Molding

Properties

Mechanical Properties


	Value	Units	Test Method / Conditions
Flexural Modulus	7300.0	MPa	ISO 178
Flexural Strength	160.0	MPa	ISO 178
Tensile Modulus	8500.0	MPa	ISO 527
Tensile Strength at Break	105.0	MPa	ISO 527
Tensile Elongation at Break	3.1	%	ISO 527
Impact Strength (Charpy, at 23°C)	56.0	kJ/m²	ISO 179/1eU
Impact Strength (Charpy, at -40°C)	55.0	kJ/m²	ISO 179/1eU
Notched Impact Strength (Charpy, at 23°C)	10.0	kJ/m²	ISO 179/1eA
Notched Impact (Charpy, at -40°C)	8.5	kJ/m²	ISO 179/1eA

Physical Properties


	Value	Units	Test Method / Conditions
Density	1170.0	kg/m³	ISO 1183

Typical Properties


	Value	Units	Test Method / Conditions
Dielectric Constant (εr)	2.813	-	-
Dielectric Constant (εr)	2.813	-	-
Dissipation Factor (tan δ) (at 77GHz, 2 mm)	0.013	-	-

Thermal Properties


	Value	Units	Test Method / Conditions
Vicat B50	145.0	°C	ISO 306
HDT / A (1.8 MPa)	160.0	°C	ISO 75-1/-2
DSC (Melt Point)	166.0	°C	ISO 11357

Processing Information (Injection Molding)


	Value	Units	Test Method / Conditions
Mould Temperature	20 - 70	°C	-
Melt Temperature	200 - 250	°C	-

Rheological Properties


	Value	Units	Test Method / Conditions
Melt Index (MVR)	3.5	cm³/10min	ISO 1133
MVR Temperature	230.0	°C	-
MVR Load	2.16	kg	-
Shrinkage (Lengthwise, 24h)	0.2 - 0.4	%	ISO 294-4
Shrinkage (Lateral, 24h)	0.5 - 0.7	%	ISO 294-4
Spiral Flow (2 mm wall thickness)	70.0	cm	-

Regulatory & Compliance

Certifications & Compliance: Directive 2011/65/EC amended through EU/2015/863 (RoHS),
EC No.1907/2006,
IATF 16949,
ISO 13485,
ISO 14001,
ISO 17025,
ISO 45001,
ISO 50001,
ISO 9001,
REACH (Europe),
REACH (UK),
RoHS Compliant,
SVHC Compliant

Technical Details & Test Data

Product Performance Characteristics

E-Modulus over Different Temperatures

Water/Glycol (50:50) Resistance at 120 °C Over Time

Pre-Drying Conditions

In a dry air (dessiccant) dryer 80-120 °C for 2-3 h
In an air circulatIng dryer 80-120 °C for 2-4 h

Storage & Handling

Storage Conditions: Store in dry, protected from light not above 30°C.