Knowde Enhanced TDS
Identification & Functionality
- Chemical Family
- Fillers Included
- Polymer Name
- Plastics & Elastomers Functions
- Technologies
- Product Families
Features & Benefits
- Labeling Claims
- Materials Features
Applications & Uses
- Plastics & Elastomers Processing Methods
Properties
- Mechanical Properties
- Physical Properties
- Thermal Properties
- Flammability
- Processing Information (Injection Molding)
- Rheological Properties
Value | Units | Test Method / Conditions | |
Flexural Modulus | 7600.0 | MPa | ISO 178 |
Flexural Strength | 135.0 | MPa | ISO 178 |
Tensile Modulus | 7800.0 | MPa | ISO 527 |
Tensile Strength at Break | 90.0 | MPa | ISO 527 |
Tensile Elongation at Break | 3.0 | % | ISO 527 |
Impact Strength (Charpy, at 23°C) | 55.0 | kJ/m² | ISO 179/1eU |
Impact Strength (Charpy, at -40°C) | 50.0 | kJ/m² | ISO 179/1eU |
Notched Impact Strength (Charpy, at 23°C) | 12.0 | kJ/m² | ISO 179/1eA |
Notched Impact (Charpy, at -40°C) | 9.0 | kJ/m² | ISO 179/1eA |
Value | Units | Test Method / Conditions | |
Density | 1220.0 | kg/m³ | ISO 1183 |
Value | Units | Test Method / Conditions | |
Vicat B50 | 136.0 | °C | ISO 306 |
HDT / A (1.8 MPa) | 140.0 | °C | ISO 75-1/-2 |
DSC (Melt Point) | 166.0 | °C | ISO 11357 |
Value | Units | Test Method / Conditions | |
Flammability (1.5 mm) | HB | class | UL 94 |
UL Recognition | yes | — | — |
Value | Units | Test Method / Conditions | |
Mould Temperature | 20 - 90 | °C | — |
Melt Temperature | 200 - 270 | °C | — |
Value | Units | Test Method / Conditions | |
Melt Index (MVR) | 2.0 | cm³/10min | ISO 1133 |
MVR Temperature | 230.0 | °C | — |
MVR Load | 2.16 | kg | — |
Shrinkage (Lengthwise, 24h) | 0.2 - 0.4 | % | ISO 294-4 |
Shrinkage (Lateral, 24h) | 0.3 - 0.5 | % | ISO 294-4 |
Regulatory & Compliance
Technical Details & Test Data
- Pre-Drying Conditions
- In a dry air (dessiccant) dryer 80-120 °C for 2-3 h
- In an air circulatIng dryer 80-120 °C for 2-4 h
- Dependant on moisture content
Storage & Handling
- Storage Conditions
Store in dry, protected from light not above 30°C.