Products

AGITAN 282 has a wide formulation lattitude due to its ease of emulsification. Therefore it is especially suitable for clear coats, non-pigmented systems, low viscous systems and emulsion manufacturing.

AGITAN 350 is a special composition with excellent stability and high efficiency. AGITAN 350 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

AGITAN 120 is an emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

AGITAN P 803 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 803 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 803 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

AGITAN 701 is particularly well suited for water reducible systems. It is also recommended for aqueous emulsion systems, architectural coatings, emulsion plasters, building materials, industrial and wood coatings, printing inks and adhesives.

AGITAN 731 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

AGITAN P 801 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 801 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

Due to its specific composition METOLAT 285 can be either used as wetting agent or as defoamer. In aqueous, alkaline systems METOLAT 285 is used as wetting agent. It also improves substrate wetting and penetration of coatings into wood. METOLAT 285 is also an oil free and particle free defoamer for solving special foam problems.

AGITAN 295 is a surface active product formulated for middle viscous, finely dispersed pigmented coatings. Existing foam will be destroyed. Re-creation of foam will be avoided. Furthermore AGITAN 295 is also recommended for treatment of different types of polyvinylalcohol - solutions.

AGITAN 156 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 156 can be used in pigmented and non-pigmented water based systems. AGITAN 156 is especially designed for the use in water based wood coatings, particularly airless, airmix and HVLP applied coatings and parquet lacquers.

AGITAN 155 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 155 is resistant to alkaline environment. It can be used between pH 6 and 11.

AGITAN 265 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems, where only low emmisions are allowed. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 265 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

AGITAN 315 is recommended for aqueous emulsion systems specifically for low odor formulations, architectural coatings, emulsion plasters, industrial and wood coatings, printing inks, adhesives and cleaners. It is compatible with all common binders.

CERETAN® MA 7008 is a Micronized ethylene-bis-stearamide-wax [EBS]. This product is used as matting agent, degassing agent for powder coatings and improving slip and anti blocking properties.

AGITAN P 840 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 840 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 840 shows a plasticizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

AGITAN P 841 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 841 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 841 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

AGITAN 271 is a special composition with excellent stability and high efficiency. AGITAN 271 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

AGITAN P 804 is recommended in such cases where oil based defoamers do not work. It is used in dry blends which are dissolved in water before application. The addition of AGITAN P 804 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

DEE FO 725E is a multi-purpose printing ink and general coatings defoamer with good dispersibility and persistence. Incorporation can be during application and as a press side foam reducer especially when rapid foam knockdown during recirculation is essential.

AGITAN P 845 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 845 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 845 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds. In some systems setting time is prolonged but curing time is not influenced.

A unique new defoaming chemistry that offers superior persistence and antifoaming ability. AGITAN 786N provides defoaming performance at the highest of shear rate applications, along with the long term persistence to prevent foam formation over significant periods of time. In addition, the moderate to high emulsifiability of AGITAN 786N provides formulators with a defoaming solution that is easy to incorporate into aqueous systems.

AGITAN P 823 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 823 results in low foaming solutions, specifically aqueous pastes or masses with very low air content. In some mortar systems AGITAN P 823 shows a plastisizing effect, meaning the spreading value is increased. This is ideal for jointless flooring compounds.

Only available in Asia! AGITAN P886 is a cost effective and economical powder defoamer specifically designed for broad use in most grout, self-leveling compounds and most other powdered building materials. It combines a cutting edge, unique composition with ease of handling to create additional value to the end user.

AAGITAN P 800 is recommended for application in dry blends which are dissolved in water before application. The addition of AGITAN P 800 results in low foaming solutions, specifically aqueous pastes or masses with very low air content.

AGITAN E 256 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios.

AGITAN 351 is a special composition with excellent stability and high efficiency. AGITAN 351 is alkali and acid resistant and can be used in a pH-range between 3 and 11.

AGITAN 766 is a highly effective siloxane defoamer which is specifically designed for the use in water-based wood coatings. It stands out due to its high effectivity to prevent micro and macro foam in medium to high viscosity systems. Furthermore AGITAN 766 provides excellent long-term efficiency and is particularly suitable for parquet lacquers, HVLP, airmix and airless spray coatings.

AGITAN 761 is a highly effective siloxane defoamer for aqueous emulsions and water reducible systems. It is particularly effective in aqueous printing inks. The nonionic structure provides excellent compatibility with most common binders.

AGITAN 158 is a polysiloxane emulsion with excellent stability and defoaming persistency. The defoamer is miscible with water in all ratios. AGITAN 158 can be used in pigmented and non-pigmented water based systems. AGITAN 158 is especially designed for the use in water based wood coatings, particulary airless, airmix and HVLP applied coatings and parquet lacquers.

AGITAN 260 is a highly effective defoamer for aqueous emulsion based systems and water reducible systems. Due to its low emulsifiability in water the defoamer is ideal for medium to high viscosity formulations. In low viscosity systems AGITAN 260 is recommended if high levels of wetting agents are present or high shear is applied which assists the incorporation of the defoamer.

DEE FO® PI-320 is a 3-Dimensional Siloxane compound defoamer designed for aqueous printing inks.Applications in Corrugated printing inks, Flexible packaging inks, Film and foil printing inks, OPVs and clear coatings, Wood coatings and top coats, Industrial spray coatings, Direct-to-metal applications and High gloss architectural coatings

AGITAN P8850 is a cost effective and economical powder defoamer specifically designed for use in grout, self-leveling compounds and most other powdered building materials. It combines a cutting edge, unique composition with ease of handling to create additional value to the end user.

AGITAN 760 is a highly effective siloxane defoamer for aqueous emulsion and water reducible systems. It is particularly effective in aqueous printing inks. A non-ionic structure provides excellent compatibility with most common binders.

AGITAN 765 is a highly effective siloxane defoamer which is specifically designed for the use in water-based wood coatings. It provides outstanding immeditate as well as long-term effectivity. Due to ist compatibility it is very universally applicable particularly in parquet lacquers and HVLP spray coatings.