Products

DISTITRON® 450 GU - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce furnitures and sanitary through hand lay up and spray up,mix with fillers and/or additives method.

DISTITRON® 183 V6 - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce pipes and tanks through filament winding method.

DISTITRON® 459 AV4 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce flat sheets,laminates,transparent and corrugated sheets.

Stypol® APMV4000 - polymethylmethacrylate low profile additive. For use in SMC, BMC and wet molding applications. Excellent mechanical properties and heat resistance. Main applications areas are electronic and electrical, home and domestic applications, industrial sector etc.

EPOVIA RF-2000SEL is Brominated vinyl ester resin for hand lay up-filament winding and it is generally used in Building and Construction,Chemical Industry,Industrial sector,Railway Sector applicatons

Stypol® RSP04021 - pre-promoted unsaturated polyester DCPD blend resin. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polynt Group 777-8685 is general purpose RTM and infusion for slower cure rate and good profile. Main applications areas are agrochemical, agrobusiness, automotive, building and construction, composites, industrial sector, marine, mass transports etc.

Polydyne® 6023 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Polydyne® 6028 - lamination resin, good adherence to acrylics substrates. Fast cycle curing. Main applications areas are building and construction, composites etc.

Polynt Group HUP 16/25 RN-Decor is generally used in building and construction, cosmetics, foundries, peroxides applications.

Polynt Group 23V, 23VX - tooling gel coat; suitable for molds; cures to a very hard and resilient surface with a high gloss; high heat distortion temperature. It is generally used in composites applicatons.

Norsodyne® 21032 - thixotropic, low peak exotherm and low shrinkage, promoted and non-waxed, good water resistance, lloyd's approved. Main applications areas are automotive, building and construction, industrial sector, marine etc.

DISTITRON® 414 RV2,5 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce polymeric concrete through mix with fillers and/or additives,casting.

DISTITRON® 1629 F - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce reinforced plastics,general purpose,pipes and tanks through filament winding,hand lay up and spray up method.

Polydyne® 5005 is used for general purpose and gel coat formulation. Main applications areas are composites, textile industry etc.

Polynt Group VUP-4400103WH-20S is generally used in home and domestic applications applications.

Armorflex® 953 Neutral Base gel coats are high performance products formulated for the fiberglass industry. They are primarily formulated for marine and sanitary applications, but should be used in any application where water and chemical resistance are needed. Armorflex® 953 series also have exceptional gloss and buffing characteristics. While offering these benefits, the Armorflex® 953 series gel coats have retained the important construction application qualities expected from polynt composites gel coats, such as resistance to porosity, tearing, and color separation; sag resistance; consistent liquid properties; excellent patchability; and more. These all add up to higher quality appeal in FRP parts made from polynt’s Armorflex® high gloss buffback® gel coats. Armorflex® 953 series gel coats have enabled customers to meet and surpass all requirements of the American national standard for plastic bathtubs, shower receptors and shower stalls, ANSI Z124.1, .2 and .3 –1995, sec. 6.1.1. Gel coats in the 953 series require only the addition of the proper amount of the appropriate methyl ethyl ketone peroxide to cure. Armorflex® high gloss buffback® gel coats are available in the same wide range of Colors as other Polycor® gel coats. Refer to polynt’s Polycor® color card for color selection. Standard Base White Armorflex® is 953wj340.

DISTITRON® 152 A1MS - Unsaturated polyester resin in styrene,Isophthalic-Neopentylic. It is used to produce agglomerated and engineered stones,furnitures and sanitary through casting,mix with fillers and/or additives method.

DISTITRON® VE 100 - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce reinforced plastics,general purpose,profiles,pipes and tanks through filament winding,pultrusion method.

Polynt Group 22-00 series gelcoat is formulated from high quality polyester resin, which cures to form a tough, glossy finish with superior gloss and water resistance. 22-series gelcoat does not contain filler.

POLYCOR® ISO NPG PA WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed.

Norsodyne® O-100 - isophthalic resin for iso onyx marble, good transparent. Main applications areas are home and domestic applications etc.

DISTITRON® 1402 AN2V3 - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce pipes and tanks through filament winding method.

NORSODYNE® FIREBLOCK H 81381 TFA - Unsaturated Polyester Resin in styrene filled,without halogeneous component and antimony trioxide. It is used as general purpose in hand lay up and spray up method.

DISTITRON® 1629 XYQ - Unsaturated polyester resin in styrene,Isophthalic. It is used to produce marine,boats through hand lay up and spray up method.

Norsodyne® G-160HV is used for general purpose coatings applicatons.

Armorflex® 943 - standard iso NPG gel coat; excellent blister resistance; resistant to certain chemicals. Main applications areas are building and construction, composites, industrial sector, marine etc.

Polycor® iso NPG BR - isophthalicnpg, excellent water resistance, chemical resistance, good UV resistance, good gloss retention available in a range clear or color variants. Main applications areas are agrochemical, agrobusiness, building and construction, furniture etc.

DISTITRON® 516 AL - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce transparent and corrugated sheets through continuous laminating method.

DISTITRON® 3519 BS - Unsaturated polyester resin in styrene,Orthophthalic. It is used to produce isothermal sandwich panels through press and vacuum molding method.

Norsodyne® 21033 - promoted and non-waxed, good weathering properties, good water resistance.

ENYDYNE® I 66319 A - Unsaturated polyester resin in styrene,DCPD. It is used in injection molding,rtm method.

POLYCOR® LP PA WHITE 9199 - A pre-accelerated gel coat based on modified Isophthalic unsaturated polyester resin. It is cured using MEKP peroxide.This product is formulated for use in a variety of industrials composite parts.

Polynt Group SMC 3500 Duralynt is a sheet molding compound based on an unsaturated polyester resin reinforced with glass fibers. This material has been developed to show a high weathering resistance. SMC 3500 Duralynt joints good mechanical properties and good flow SMC 3500 Duralynt is formulated according to RoHS, REAC regulation SVHC and WEEE European legislation.

DISTITRON® VE 370 SC - Bisphenol-A Epoxy Resin based vinyl ester in styrene. It is used to produce marine,boats through vacuum infusion method.

POLYCOR® ISO NPG BR WHITE 9199 - A pre-accelerated gel coat based on Isophthalic Neopentylglycol unsaturated polyester resin. It is cured using MEKP peroxide.This high performance gel coat is formulated for use in sanitary and marine applications or GRP application where resistance to water and blistering are needed